Hunting Washington Forum

Equipment & Gear => Scopes and Optics => Topic started by: superdown on April 19, 2020, 08:20:18 PM

Advertise Here

Title: Scope rings/Rail recommendations
Post by: superdown on April 19, 2020, 08:20:18 PM

I have a Savage 110T-SR .300wm. I am looking for a good set of rings and a rail. It has the factory aluminium rail. I am planning on replacing the factory rail with steel.The scope is a Ziess Conquest V4 6-24X50 30mm.

Title: Re: Scope rings/Rail recommendations
Post by: BULLBLASTER on April 20, 2020, 08:38:03 AM

There is probably nothing wrong with the factory aluminum rail. Id leave it personally, just make sure the screws are loc tited and maybe check if it needs bedded.

Ive mostly been using hawkins rings lately. Theyre nice and have a level built in.

Title: Re: Scope rings/Rail recommendations
Post by: superdown on April 20, 2020, 03:34:02 PM

Thanks those look nice. I like the built in level.

Title: Re: Scope rings/Rail recommendations
Post by: buckfvr on April 20, 2020, 04:21:04 PM

Long action magnum, yep, steel rail and look at Seekins rings.

Title: Re: Scope rings/Rail recommendations
Post by: Jason on April 29, 2020, 05:49:16 AM

I used a Warne steel rail and Badger Steel rings on my Savage magnum rifle. Personally I would ditch the aluminum rail.

Title: Re: Scope rings/Rail recommendations
Post by: opdinkslayer on April 29, 2020, 05:54:54 AM

I’ve had good luck with EGW rings & rail but I’m using Hawkins on my latest build. Lots of good choices out there.

Title: Re: Scope rings/Rail recommendations
Post by: snowshoes22 on April 29, 2020, 10:20:31 AM

Ken Farrell rails are nice. They have more MOA options if needed.

Title: Re: Scope rings/Rail recommendations
Post by: superdown on May 02, 2020, 03:02:09 PM

Thanks for the recommendations. :tup: Looks like some good options.