Hunting Washington Forum

Equipment & Gear => Power Equipment & RV => Topic started by: Boss .300 winmag on April 18, 2022, 11:14:09 AM


Advertise Here
Title: Aftermarket Aluminum Radiators For Trucks.
Post by: Boss .300 winmag on April 18, 2022, 11:14:09 AM
Any advice on brands, where to buy?
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: h20hunter on April 18, 2022, 11:14:42 AM
Performance Radiator
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Westside88 on April 18, 2022, 11:18:50 AM
I’ve used the Summit Racing in-house brand s couple times. I was very happy with the fit and quality
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Magnum_Willys on April 18, 2022, 11:28:46 AM
Check out Champion Radiators.  Good price.   I’ve used Griffin for custom but you pay for it.
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: huntnphool on April 18, 2022, 11:33:31 AM
 I’m happy with mine from https://www.mishimoto.com/automotive/aluminum-radiator-performance.html
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Boss .300 winmag on April 18, 2022, 07:15:00 PM
I’m happy with mine from https://www.mishimoto.com/automotive/aluminum-radiator-performance.html

Yeah a little out of my price range.
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Boss .300 winmag on April 18, 2022, 07:15:38 PM
Check out Champion Radiators.  Good price.   I’ve used Griffin for custom but you pay for it.

They don’t make them for 2004 Ram Cummins.
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Boss .300 winmag on April 18, 2022, 07:16:26 PM
Looking for an all aluminum one.
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: callturner on April 18, 2022, 07:28:22 PM
Rockauto.com
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Ridgeratt on April 18, 2022, 07:56:01 PM
LMC Truck.
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Iveexcaped3 on April 18, 2022, 08:00:15 PM
I ran a mishimoto in my Nissan and it was worth the cost. Their warranty is similar to vortex for any failure they’ll replace it even if you run into someone. Their welds are super clean.
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: WapitiTalk1 on April 18, 2022, 08:40:55 PM
Following.
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Skillet on April 18, 2022, 08:57:03 PM
I’m happy with mine from https://www.mishimoto.com/automotive/aluminum-radiator-performance.html

Yeah a little out of my price range.

I have some Mishimoto stuff on my Ford, I think it is worth the money for the build quality.  Welds look like they were done by a robot.  We're not talking a door stop here, it needs to contain the pressurized coolant for a very expensive engine.  What is your price range?  A mishimoto for your truck looks to be in the $875 range.

https://www.mishimoto.com/dodge-ram-2500-5-9l-6-7l-cummins-engine-03-10.html (https://www.mishimoto.com/dodge-ram-2500-5-9l-6-7l-cummins-engine-03-10.html)
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Jpmiller on April 19, 2022, 06:50:49 AM
Check out Champion Radiators.  Good price.   I’ve used Griffin for custom but you pay for it.

They don’t make them for 2004 Ram Cummins.

Those 04 Cummins are no good. As an act of charity if you sign the title over to me I'll come.dispose of it for you at your earliest convenience  :chuckle:
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Born2late on April 19, 2022, 07:10:44 AM
I have two dodges I ran the Miss YMoto radiators in. I’ve replaced them three times under warranty so far. Warranty was OK but wasn’t impressed with how it held up in the truck. They would always leak where the fins went into the side part of the radiator. Ended up just buying a cheap one and throwing it in my truck after the last one went bad. Won’t be using them again
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Boss .300 winmag on April 19, 2022, 08:13:06 AM
Check out Champion Radiators.  Good price.   I’ve used Griffin for custom but you pay for it.

They don’t make them for 2004 Ram Cummins.

Those 04 Cummins are no good. As an act of charity if you sign the title over to me I'll come.dispose of it for you at your earliest convenience  :chuckle:

Bring $20,000 for a charitable donation with you.😉
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Boss .300 winmag on April 19, 2022, 08:16:31 AM
I have two dodges I ran the Miss YMoto radiators in. I’ve replaced them three times under warranty so far. Warranty was OK but wasn’t impressed with how it held up in the truck. They would always leak where the fins went into the side part of the radiator. Ended up just buying a cheap one and throwing it in my truck after the last one went bad. Won’t be using them again

That’s completely ridiculous for the price of them.🤯
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: KFhunter on April 19, 2022, 08:22:59 AM
 :yeah:

Talked me right out of that option  :chuckle:
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Skillet on April 19, 2022, 08:54:29 AM
:yeah:

Talked me right out of that option  :chuckle:

Ya, me too. That would be really frustrating.
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: Jpmiller on April 19, 2022, 09:13:33 AM
Check out Champion Radiators.  Good price.   I’ve used Griffin for custom but you pay for it.

They don’t make them for 2004 Ram Cummins.

Those 04 Cummins are no good. As an act of charity if you sign the title over to me I'll come.dispose of it for you at your earliest convenience  :chuckle:

Bring $20,000 for a charitable donation with you.😉

 :chuckle: was worth a shot
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: HntnFsh on April 19, 2022, 12:38:11 PM
I have two dodges I ran the Miss YMoto radiators in. I’ve replaced them three times under warranty so far. Warranty was OK but wasn’t impressed with how it held up in the truck. They would always leak where the fins went into the side part of the radiator. Ended up just buying a cheap one and throwing it in my truck after the last one went bad. Won’t be using them again

Heard of several issues with them awhile back on the Duramax forum also.
Title: Re: Aftermarket Aluminum Radiators For Trucks.
Post by: huntnphool on April 19, 2022, 11:04:20 PM
I have two dodges I ran the Miss YMoto radiators in. I’ve replaced them three times under warranty so far. Warranty was OK but wasn’t impressed with how it held up in the truck. They would always leak where the fins went into the side part of the radiator. Ended up just buying a cheap one and throwing it in my truck after the last one went bad. Won’t be using them again

 YMMV, never had a issue with mine!
SimplePortal 2.3.7 © 2008-2025, SimplePortal