Hunting Washington Forum

Equipment & Gear => Power Equipment & RV => Topic started by: Boss .300 winmag on May 20, 2022, 09:13:08 AM

Title: Camper With TorkLift System Improperly Installed
Post by: Boss .300 winmag on May 20, 2022, 09:13:08 AM: He is either using the wrong model system for his truck or has the so synched down so tight he’s bending up his rear mount bars. His camper tie down mounts won’t last long as there going to ripe out of the camper.🤯

Headed east bound yesterday on HWY 20 after 4pm yesterday.

If your on Hunt Wa pm me I can help I have this system.
Title: Re: Camper With TorkLift System Improperly Installed
Post by: KNOPHISH on May 20, 2022, 11:17:50 AM: Really hard to tell by pic but that right rear sorta looks like a front tie down on the back. I have this system and the front tie downs are straight and the rears have a slight angle.
Title: Re: Camper With TorkLift System Improperly Installed
Post by: Boss .300 winmag on May 20, 2022, 11:53:58 AM: He has the rear ones bent up touching his bumper, those tie down points are slightly upward after being mounted.
Title: Re: Camper With TorkLift System Improperly Installed
Post by: Cylvertip on May 20, 2022, 01:15:49 PM: Could be customized to provide more ground clearance. :dunno:
Title: Re: Camper With TorkLift System Improperly Installed
Post by: MADMAX on May 20, 2022, 01:15:54 PM: Installed upside down ?
Title: Re: Camper With TorkLift System Improperly Installed
Post by: Boss .300 winmag on May 20, 2022, 02:29:31 PM: Quote from: MADMAX on May 20, 2022, 01:15:54 PM
Installed upside down ?

Possibly

One other thing I noticed was his orings on the tensioners weren’t at the right levels.

And that’s really the only way you know they have the proper tension applied for the camper.
Title: Re: Camper With TorkLift System Improperly Installed
Post by: Cylvertip on May 30, 2022, 02:12:51 PM: Quote from: Boss .300 winmag on May 20, 2022, 02:29:31 PM
Quote from: MADMAX on May 20, 2022, 01:15:54 PM
Installed upside down ?

Possibly

One other thing I noticed was his orings on the tensioners weren’t at the right levels.

And that’s really the only way you know they have the proper tension applied for the camper.

Assuming they knew to move the o-rings.