Hunting Washington Forum
Big Game Hunting => Muzzleloader Hunting => Topic started by: Threewolves on September 29, 2024, 12:05:53 PM
-
Wondering where or what folks with the newer CVA accura's do with their collapsible high-speed carbon fiber ram rods since it doesn't go underneath the barrel?
What do you do with or put the pouch so it is still handy to get at and you don't forget it.
Sent from my SM-A426U using Tapatalk
-
Just did a hunt with my daughter being the shooter. I had the collapsible ramrod in the pouch it comes with on my belt.
-
That was a very epic hunt.
what model are you shooting?
May be I am overthinking it. Just got the accura. I've been hooking that pouch on everything trying to figure out what I like best
Sent from my SM-A426U using Tapatalk
-
Acura LR-X
Full disclosure our hunters only 52 minutes long.
Ramrod is a work in progress.
Scope is a work in progress.
Powder is a work in progress.
We did get the trigger pull lightened up as much as we could but it’s still pretty stiff IMO.
-
Why would they not have the ramrod under the barrel? Stupid not to have
-
Why would they not have the ramrod under the barrel? Stupid not to have
The idea was it would be more accurate not having anything attached to the barrel
-
Wondering where or what folks with the newer CVA accura's do with their collapsible high-speed carbon fiber ram rods since it doesn't go underneath the barrel?
What do you do with or put the pouch so it is still handy to get at and you don't forget it.
First year using it. Right now i have it attached to the waist belt of my pack. I'm always leery of just having a snap button connection point with anything as i've lost items this way. So i have the pouch snapped to my waist belt but also threw a zip tie onto the black pull string of the pouch and attached it to my waist belt too for extra certainty it wouldn't snap loose and fall off.
-
Wondering where or what folks with the newer CVA accura's do with their collapsible high-speed carbon fiber ram rods since it doesn't go underneath the barrel?
What do you do with or put the pouch so it is still handy to get at and you don't forget it.
First year using it. Right now i have it attached to the waist belt of my pack. I'm always leery of just having a snap button connection point with anything as i've lost items this way. So i have the pouch snapped to my waist belt but also threw a zip tie onto the black pull string of the pouch and attached it to my waist belt too for extra certainty it wouldn't snap loose and fall off.
Thats a great idea. I will come up with some sort of secondary way to secure it. I am also ordering a second one to have as a spare.
-
Right now I am going with it under my binoculars. They are usually always with me.
Little long for the pants cargo pockets
Like the idea of back up security
Sent from my SM-A426U using Tapatalk
-
UPDATE 10-09-24
So, CVA and Muzzle loader.com. have been kinda ok.
Bought the ML from ML.COM.
It was missing the rear sling stud.
The first time I used the collapsible ram rod it broke.
Ist time I shot it, I couldn't get to shoot any higher than 4 inch low at 50 yd. ( shipped with wrong scope base, found out later)
I called ML.com they were nice but pointed me to CVA
They were nice, said they would replace the ram rod, told me some were shipped with the wrong scope base and that the would send that and the sling stud. This was last week mon/Tuesday. Thursday I called CVA and was told when shipping sends it out I would get notified. Friday they shipped the stuff... by truck..... got to track it all the way across country.
So, the stuff got here and the high speed carbon fiber and ALUMINUM ramrod now in six sections not four like the all carbon is broke. The first section aluminum part is sucked up into the second sections.
I fixed that with a little arrow glue. ON the original all carbon, the carbon didn't break it was the bungee cord stuff in the middle that broke. With all the free time I had waiting for the new stuff to come I tied a knot that bungee cord and fixed that. It's more of a pain in the ass than you would think.
So, another trip to the range.
Yes, l am bummed, but getting over it. Been using a buddy's Ultima for hunting. Heck. If I stuck with my Ole TC 54 I wouldn't have gone through this. People talk these accuras up, I will see.
Sent from my SM-A426U using Tapatalk
-
Ya, the snap for the case has come undone twice. I can fix that too.the six piece Rod doesn't come out as easy as the four piece. I will work on that too.
For over 300 years the ram rod has been underneath the barrel where it belongs. That thing abouts better accuracy when nothing is touching the barrel is true 500 plus in modern centerfire, I don't think it makes that much difference in a muzzle loader at 100. 150 yards. It really does make you want to make sure that first shot counts, as always.
NO PROBLEMS, ONLY SOLUTIONS. (https://uploads.tapatalk-cdn.com/20241009/6e54812762abaf68d61cb652bd272006.jpg)(https://uploads.tapatalk-cdn.com/20241009/40fad1cd4d95bcbc8943ac660b808e11.jpg)(https://uploads.tapatalk-cdn.com/20241009/93aa37256a2dc89e0c1a300ec8819443.jpg)
Sent from my SM-A426U using Tapatalk
-
My accura carbon fiber rod broke at the first use, one of the plastics inside a segment of the rod wasn't glued properly. I opened the segment with the plastic insert, pushed it out with a screwdriver, and put some super glue on it. Like new. I emailed CVA and they're sending a free and enhanced version. I'm curious to see how that's going to look like.
-
It is going to look like the first picture with the aluminum insert in the carbon fiber rod. It breaks down in two six sections instead of four like the one that came with my rifle. It makes it harder to pull out of the ram rod pouch. I had to fish out the aluminum insert in the first sections of the new rod and glue it back in with arrow glue.