Hunting Washington Forum
Equipment & Gear => Guns and Ammo => Topic started by: JJB11B on November 22, 2024, 04:03:58 PM
-
I just got home with the above mentioned rifle gonna a Leupold MK4 LRT on it. I have components but does anyone have a pet load. 1:10 twist 24” barrel. Thinking 180 grain boolits would be nice but I’m open to advice. Gonna be using H1000 for propellant and federal magnum match primers.
-
Those are really nice rifles. I’m sure you’ll enjoy it!
-
Bumping this hoping someone has an idea of a place to start I plan to use this rifle for hunting deer and elk. Bullet weight and type suggestions would be appreciated.
-
Bullets:
I loaded up some 165 TTSX rounds for my 300 winmag recently. 26" 1 in 10 twist. I don't have any results to report on those yet.
Many people like nosler accubonds. Sierra gameking bullets have a solid reputation as hunting bullets and they are much cheaper.
-
If you want to stay with a cup and core bullet.....the 180 grain accubond all the way.
If you want a monolithic bullet.....154 HHT, 160 HH or 168 HHT would be my hammer bullet choices. Any of those would work and I would personally go with the 160 HH or 168 HHT. You would have to change your powder to something in the burn rate of H4350 with any of the mono's. I suspect you would be pushing any of those bullets at 3400-3600 fps. With those speeds, I would look really hard at the 160 HH (non tipped hammer). if you go with a mono, you have to go light for caliber as they like speed. It also makes for a really long OACL if you go with standard weight bullets. Check your twist and mag length before buying mono's.
Good luck...should be an amazing rifle.
-
H1000 and 300wm go together like biscuits and gravy. You’ll probably end up right around 76gr with the 180’s depending on seating depth.