Hunting Washington Forum
Equipment & Gear => Power Equipment & RV => Topic started by: doubletall on January 22, 2025, 05:52:10 PM
-
So my passenger side front window won't roll down with either the master switch or the door switch. Things I've checked so far: the fuses, relay and breaker are all good. The switch checks out with continuity. I'm getting 12.4 volts at the motor harness when I activate the switch on both the up and down control wires. I went to Autozone and bought a new motor and tried it in the parking lot and it didn't work. (I checked to make sure I could return it before I bought it.) Any other Ideas? Maybe a coincidence but the first time I noticed it not working was right after my battery died and I jump started it.
-
Loose connection/wire?
elksnout.
-
Yes. Google search “recalibrate 2014 f150 window motor.”
You have got this.
-
Found the problem. The socket that the door wiring harness plugs into corroded and a pin broke off. Looks like I'll have to remove part of the dash to provide access to replace the plug.
-
Found the problem. The socket that the door wiring harness plugs into corroded and a pin broke off. Looks like I'll have to remove part of the dash to provide access to replace the plug.
Wow corroded on a 2014 already.🤯
