Hunting Washington Forum
Equipment & Gear => Guns and Ammo => Topic started by: jackelope on April 22, 2010, 02:27:11 PM
-
I saw that a few of the folks on here have these pistols...just curious what everyone thinks about them. I'm considering a Springfield XDm .40 caliber rig. Looking for input as far as pro's and cons.
Thanks folks.
-
I personally have the xd 45 compact. I absolutely love the pistol it is very accurate and I really like the safety system on it. I also like the small clip for when I am packing but can put in the 13 round clip if I want to. Have put about 300 rounds through it and have not had one problem...
-
Co worker picks up his new XDM 3.8 in 9mm next week, i will shoot it and let you know what i think of it.
-
Great gun.
I ended up with a Glock 23 instead. I shot about the same with both but the Glock felt better in my hand.
-
I personally have the xd 45 compact. I absolutely love the pistol it is very accurate and I really like the safety system on it. I also like the small clip for when I am packing but can put in the 13 round clip if I want to. Have put about 300 rounds through it and have not had one problem...
I saw that gun too. I like it with the large mag but it was too small with the smaller mag. I've got big hands and am not too comfortable with the shorter grip/small mag. With the big mag you might as well buy the full size. The only difference is a 1/2" in the barrel. That gun is the most comfortable that I looked at in a SC size.
-
I bought the XDm in 9mm. Love it, fantastic weapon. But apparently alot of guys here think the 9mm is not deadly enough so I will need to get two of them.
-
my dad has the XDm 40 we out about 200 rounds through it the first time out its a nice pistol pretty accurate too. it beat up the web of my hand right where the thumb conects but i think that was just how i was holding it
-
I bought the XDm in 9mm. Love it, fantastic weapon. But apparently alot of guys here think the 9mm is not deadly enough so I will need to get two of them.
I've got the same gun. I tried the XD and a Glock 19 on a rental range. The Glock was ok,but I shot the XD better.
If I can't get it done with 17 rounds of 124gr +P, I ain't gonna get it done with a .40 or .45 either.
-
i have a xdm in 40 sw i have always carried a revlover but bought this pistol to play with and it has earned my trust. i have the 4.5" black and black 17rds pdx1 for carry i have put over 600 round threw it with out 1 problem. i will never own another auto for carry i love mine. they are also putting out the new 3.8 and a xdm 45 is in the works as well.
HANDS DOWN BUY ONE!!!! i had the money to buy any semi out there and bought this guns with all the reviews and after shooting the xd's a lot and i think it won hangun of the year as well. comes with a holser which i replaced with a serpa and 2 mags loader lock case etc great gun i trust my life and my familys life to.
-
Bought my XD the first year they came out which was like 8 years ago and ive loved every minute of owning that gun. even better now that they are making accessories and fun goodies for them. i recommend it every chance i get
-
Love my XD 40. Mine is green and stainless.
-
love my 40. sub compact 8)
-
I have an XDM in 9mm. Great gun and the 9mm caliber is inexpensive option for shooting. For the price you can't go wrong
-
Thanks guys for all the input.
-
i also have a XD40 4" and love the heck out of it,i coulda bought any hand gun out there when i was ready but this is what felt the best for me.
ive put over 500rds through mine with out any issues,sights were right on out of the box.
Easy to clean easy to carry easy to shoot
-
I had an XD-40 sub compact for about a year. It was my first carry auto loader and it was a great gun. It shot, carried, and fit my hand well. I sold it to move up to a 10mm Glock 29 and regretted it. The Glock didn't fit my hand nearly as well. I wouldn't hesitate to buy another XD. I recommend them to everyone.
Andrew
-
Got one for sale if anyone is interested...shoot me a PM and ill give you the details
-
Not much I can add here. I bought a XD45 service model several years ago, and have only great things to say about it.
-
I love mine.....havent had a misfire or jam yet. XD .45, service model
-
Just got an XDM 40 for my 50th b-day.
Can't wait to shoot it.
I have noticed the mag release is stiffer with a loaded mag vrs an empty mag. Somethin I will be watching for improvement on operation.
-
I bought the XDm in 9mm. Love it, fantastic weapon. But apparently alot of guys here think the 9mm is not deadly enough so I will need to get two of them.
With the +P ammo the 9mm has a 90-91% first shot stopping sucess rate
40: About 94%
45: Also about 94%
Yeah, you might want to get two of them :)
-
Just got an XDM 40 for my 50th b-day.
Can't wait to shoot it.
I have noticed the mag release is stiffer with a loaded mag vrs an empty mag. Somethin I will be watching for improvement on operation.
this will lossen up with Use. leave a fully loaded mag in it for a while.
-
With the +P ammo the 9mm has a 90-91% first shot stopping sucess rate
40: About 94%
45: Also about 94%
[/quote]
this is why you double tap when carrying a 9mm :)
-
Just got an XDM 40 for my 50th b-day.
Can't wait to shoot it.
I have noticed the mag release is stiffer with a loaded mag vrs an empty mag. Somethin I will be watching for improvement on operation.
this will lossen up with Use. leave a fully loaded mag in it for a while.
yes i noticed that as well but with many hundreds of rounds down range it is very easy now, also if you put only 15 in it is not as bad its when you have 16 in it that it does get a bit stiffer when it is new. you will get er broke in. the best and only semi i will own.
-
Kinda what I'm expecting. Thanx for the info.
That 16th round is a beotch to load in a new mag.
-
Got to shoot both new guns today.
The Tauraus 6605( new warranty replacement to my old 66) shoots well after adjusting the sights a bit.
The XDM shot well. The mags loosened right up.
I was shooting left when we started. If I put pressure below the slide with my left thumb, I can shoot about a 2 inch group at 20 yrds. Otherwise everything went left.
So Is this left thumb pressure thing common with a semi auto?
Am I rolling on the trigger pull? Do i need to learn a new grip?
Me thinks I need more ammo and practice.
-
you might be torque in it a bit but the front sight can be moved left or right you don't want to have to try to do somthing to make the gun shoot well.
-
anybody have a compensated one?
-
Got to shoot both new guns today.
The Tauraus 6605( new warranty replacement to my old 66) shoots well after adjusting the sights a bit.
The XDM shot well. The mags loosened right up.
I was shooting left when we started. If I put pressure below the slide with my left thumb, I can shoot about a 2 inch group at 20 yrds. Otherwise everything went left.
So Is this left thumb pressure thing common with a semi auto?
Am I rolling on the trigger pull? Do i need to learn a new grip?
Me thinks I need more ammo and practice.
It's the long trigger pull that is getting you, trigger jobs are probably the #1 upgrade people do on the xd/xdm's, http://www.pistolgear.com/proddetail.php?prod=05SSC (http://www.pistolgear.com/proddetail.php?prod=05SSC) that right there is a pretty decent trigger kit and there are a ton of aftermarket upgrades available on that site.
Practice will help but practice + trigger kit will really shine.
-
nobody with a ported/compensated one?
-
Owner of an XD Tactical in .45 acp. Smooth shooting, dead on accurate, hold lots of rounds. Way to big for carry but I never got it with that intention. Super easy to break down for at home or field carry. Love it. Also own a Kimber Custom II, a stock Springfield 1911 in .45. It is much better than the Springfield and on par with my Kimber.
-
I have the XD40, love it, one of my two carry arms, the other a Kimber .45 Tactical Custom II.
-
just picked up a xd 40 compact with 4 inch barrel and compensated barrel cant wait to shoot it
-
shot the new xd, it was amazing
-
I am looking at getting a compact one. I have the FNH 45, love it, made in USA but REALLY BIG. I want a carry pistol and the FNP is not it.
Anyone wanna trade?
-
It's not a compact but I would trade my xdm 9mm if you like.
-
So i'm shopping around for some ammo. What do you guys reccomend? Looking for target stuff and something defensive. Also in the market for a holster.
-
winchester Ranger, its the same as the winchester Black talon they stoped making in the early 90s makes a nasty mushroom :yike:
-
It's not a compact but I would trade my xdm 9mm if you like.
No thanks, want to stick to 45 and a compact. Thanks for the offer though!
Ammo - Cheap Walmart stuff. Winchester target and Winchester personal protection. Good stuff and affordable IMO.
-
i shoot a lot of reminton 180jhp-fmj's for just plinking but my personal protection loads that i carry in it are the new pdx1 they are a bit spendy but i have done a lot of bullet testing and realy like the way they preform i think they are about 22.00 for 20 shells kinda funny when one box fills one mag and the chamber :chuckle:
-
Love mine..very good quality firearm..Never has failed Me.
(https://hunting-washington.com/smf/proxy.php?request=http%3A%2F%2Fi279.photobucket.com%2Falbums%2Fkk157%2Fruger123%2FIMG_0308-2.jpg&hash=58272bb57d12d4f60a367a70a29befa01bfee287)
(https://hunting-washington.com/smf/proxy.php?request=http%3A%2F%2Fi279.photobucket.com%2Falbums%2Fkk157%2Fruger123%2FIMG_0309-2.jpg&hash=3af1af47a083eaba79c2a353d595fa79336a2ac2)
Black hawk CQC with Serpa lock great combo..
(https://hunting-washington.com/smf/proxy.php?request=http%3A%2F%2Fi279.photobucket.com%2Falbums%2Fkk157%2Fruger123%2FIMG_0307-2.jpg&hash=fceb60cd5a07d1a49fcbfd8e6dfcc707043eb85c)
-
I always wondered what it would look like from the bad guys perspective...
-
Made Me nervous taking the picture of an "Empty" .40.. :o
It would! Look real bad looking down the Bore of a loaded .40 :yike:
Hope none of Us ever go through that..
Whitey..
-
I'm hooked on my new XDm 9mm 3.8, put it's a little big for CCW in my opinion. :twocents:
-
i am suprised to hear that i carry a full size xmd 40 every day.
-
i am suprised to hear that i carry a full size xmd 40 every day.
What holster?
-
uncle mikes: inside the pants style and i think it is a size 5 if i remeber right. soft and doesnt bother me at all :tup:
-
and if i am going to carry open, i use my serpa
-
Thanks Carpsniper,
I just got my CCWL so I will check out these options.
-
no prob i love the serpa holster but unless i have a jaket or sweater on its very hard to carry with it unless i want to just carry open. make sure you check the size mine is the size 5 inside the pants with the smaller 3.8 xdm you will need a litttle smaller holster good luck