Hunting Washington Forum
Equipment & Gear => Guns and Ammo => Topic started by: Hornseeker on April 20, 2012, 07:28:57 PM
-
Whats your favorite load and what are some of the best values in bullets and such? Just curious.... once i buy this fricken gun I'm gonna reload about 2.3 million rounds for it!!!!!
:chuckle:
:tup:
:hello:
-
52g hpbt serria is a fave of mine :tup:
-
Sooooo why stop only at 2.3 million rounds. :chuckle:
-
2.3 Million loads :chuckle: Good luck with that :tup:
-
2.3, 2.4....somewheres in there...
You using Varget at all Matt? Do you have a progressive?
-
Don't have my numbers/info readily available to give you better information, but my best grouping has been with Varget and a 70 grain hollow point from Speer; I do know that it was loaded at max mag length (2.75" if I remember correctly). That's a 16" 1-7 twist AR; 5 shot in .38" at 100 with no fliers, the best part is it's consistently doing it when I can do my part. It was .5", and then I added the Sims Deresonator and found a surprising 1/8" in group shrink when I got it to the right point on the barrel.
-
2.3, 2.4....somewheres in there...
You using Varget at all Matt? Do you have a progressive?
I use h335 in most of my 223 loads. Nope all on a single stage press :yike:
-
I mostly shoot the 55g Nosler ballistic tip, yotes don't stand a chance. As for powder h335 or 4198
-
I assume you are talking AR type gun,as a bolt gun would use different load,with AR you want to economize and use powder that flows throug meter because you will use a lot.
-
I assume you are talking AR type gun,as a bolt gun would use different load,with AR you want to economize and use powder that flows throug meter because you will use a lot.
Great point... What kind of progressive reloader do you have?
-
I'm using varget since I just started reloading. I saw that a lot of people were using it. The good news is I'm pretty sure I wouldn't be able to overload a .223 with it. The bad news is I can't figure out how some people are getting more than 27 grains in there. 27 grains puts me at the bottom of the neck after I tap the case a bunch of times to get it to settle.
-
Compressing it will get you mor in ....
Coolio all... thanks for the info. Yes, AR15... 20" barrel. 5.56. (the 556 allows for a hotter load than the 223 right?)
Well gentleman...they are calling for 86 degrees here in Billings today. THe PD's and gophers will be sitting up tall!!!
-
52 or 53gr HP BT, IMR4198 powder, never had good luck with varget in anything Ive tried it in. This load makes the bullets touch at 100yds
-
BT 50gr noslers w/ imr 4895 and 4198