collapse

Advertisement


Author Topic: New "Firearm" but where in seattle area to get it scoped  (Read 3361 times)

Offline FisherKing

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jan 2013
  • Posts: 41
  • Location: Seattle
New "Firearm" but where in seattle area to get it scoped
« on: January 29, 2013, 01:28:27 PM »
Ok so I just bought a new toy a ruger m77 mkii in .280..

and have never had a scope installed since I got back to seattle. So where is the best place to go?  I know I could do it myself but really have no desire to buy all the "stuff" to do a good job.

BTW, anyone had any experience with the Nikon Monarch 2.5-10x42 Riflescope?

cheers,


« Last Edit: January 31, 2013, 02:57:30 PM by FisherKing »
Fishermen, hunters, woodchoppers, and others, spending their lives in the fields and woods, in a peculiar sense a part of Nature themselves, are often in a more favorable mood for observing her, in the intervals of their pursuits, than philosophers or poets even, who approach her with expectation. She is not afraid to exhibit herself to them. Henry David Thoreau

Offline CAMPMEAT

  • CAMPMEAT
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 13347
  • Location: ARIZONA, A PLACE WHERE I DON'T WANT YOU LIVING !!
  • I love my gun rights in Arizona..
Re: New Toy, but where in seattle area to get it scoped
« Reply #1 on: January 29, 2013, 01:51:35 PM »
The place you bought it should be able to mount a scope.
I couldn't care less about what anybody says..............

Offline huntnphool

  • Chance favors the prepared mind!
  • Political & Covid-19 Topics
  • Trade Count: (+15)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 32903
  • Location: Pacific NorthWest
Re: New Toy, but where in seattle area to get it scoped
« Reply #2 on: January 29, 2013, 02:03:06 PM »
Ok so I just bought a new toy a ruger m77 mkii in .280..

and have never had a scope installed since I got back to seattle. So where is the best place to go?  I know I could do it myself but really have no desire to buy all the "stuff" to do a good job.

BTW, anyone had any experience with the Nikon Monarch 2.5-10x42 Riflescope?

cheers,
I have Nikon scopes on most of my rifles and love them. Never had a issue with any of them, even after them taking hard hits in the field. If I ever do have a issue Nikons customer service is fantastic as well.

You might check with Federal Way Discount Guns, they have great prices. :twocents:
The things that come to those who wait, may be the things left by those who got there first!

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: New Toy, but where in seattle area to get it scoped
« Reply #3 on: January 29, 2013, 04:17:19 PM »
I say you should try mounting it yourself. It's pretty easy and once you've done it a couple times, you'll never pay somebody to do it again.

As far as the Nikon scope goes, I've had really good luck with Nikons. I'm not crazy about their eye relief though. That's my biggest compliant.

Andrew

Offline uplandhunter870

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jul 2009
  • Posts: 1322
  • Location: Wenatchee
Re: New Toy, but where in seattle area to get it scoped
« Reply #4 on: January 29, 2013, 05:03:58 PM »
i have a nikon monarch and love it, not the same power as the one you mentioned but still its a great scope.

i might be missing something but rugers usually come with their own rings which i think are pretty solid rings.  what else besides a scope a set of rings and a couple wrenches/screw drivers does a guy need to mount a scope? not trying to be rude just dont understand i guess

Offline FisherKing

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jan 2013
  • Posts: 41
  • Location: Seattle
Re: New Toy, but where in seattle area to get it scoped
« Reply #5 on: January 29, 2013, 11:13:07 PM »
i have a nikon monarch and love it, not the same power as the one you mentioned but still its a great scope.

i might be missing something but rugers usually come with their own rings which i think are pretty solid rings.  what else besides a scope a set of rings and a couple wrenches/screw drivers does a guy need to mount a scope? not trying to be rude just dont understand i guess

Good question, yes they do come with their own rings. But I was under the assumption you needed a bore sighter(collimeter) and alignment bars for the rings to do it right.
Fishermen, hunters, woodchoppers, and others, spending their lives in the fields and woods, in a peculiar sense a part of Nature themselves, are often in a more favorable mood for observing her, in the intervals of their pursuits, than philosophers or poets even, who approach her with expectation. She is not afraid to exhibit herself to them. Henry David Thoreau

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15186
  • Location: Sultan/Wisconsin
Re: New Toy, but where in seattle area to get it scoped
« Reply #6 on: January 29, 2013, 11:26:28 PM »
All the "stuff?"

A target, something to prop the rifle up, a hand or two to remove the bolt, a screwdriver or whatever tool to mount the scope rail and rings, and your eye to look down the barrel and center the target, do the eye relief part first, once the target is centered looking down your bore, move the crosshairs so they are on center, or just a touch above.  This should get you pretty close on paper with your first shots.

It's not to tough to do.  For the eye relief, close your eyes, mount the gun, open your eye and have someone move the scope forward or back until it is in the right spot, then mark it.

Offline Smokepole

  • Kevin Miller
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jan 2008
  • Posts: 2336
  • Location: Upper Skyberian
Re: New Toy, but where in seattle area to get it scoped
« Reply #7 on: January 29, 2013, 11:30:12 PM »
All the "stuff?"

A target, something to prop the rifle up, a hand or two to remove the bolt, a screwdriver or whatever tool to mount the scope rail and rings, and your eye to look down the barrel and center the target, do the eye relief part first, once the target is centered looking down your bore, move the crosshairs so they are on center, or just a touch above.  This should get you pretty close on paper with your first shots.

It's not to tough to do.  For the eye relief, close your eyes, mount the gun, open your eye and have someone move the scope forward or back until it is in the right spot, then mark it.

 :yeah:  pc o cake

Offline Hawgdawg

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Dec 2011
  • Posts: 951
  • Location: Enumscatch
Re: New Toy, but where in seattle area to get it scoped
« Reply #8 on: January 29, 2013, 11:58:42 PM »
All the "stuff?"

A target, something to prop the rifle up, a hand or two to remove the bolt, a screwdriver or whatever tool to mount the scope rail and rings, and your eye to look down the barrel and center the target, do the eye relief part first, once the target is centered looking down your bore, move the crosshairs so they are on center, or just a touch above.  This should get you pretty close on paper with your first shots.

It's not to tough to do.  For the eye relief, close your eyes, mount the gun, open your eye and have someone move the scope forward or back until it is in the right spot, then mark it.

forgot the locktight...or your wifes nail polish if in a pinch! :hello:

Offline coachcw

  • Past Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jun 2009
  • Posts: 8821
  • Groups: Team getsum !
Re: New Toy, but where in seattle area to get it scoped
« Reply #9 on: January 30, 2013, 06:24:25 AM »
the nikon with a bdc retical would be nice in some talley bases . 4x12

Offline Wacenturion

  • Non-Hunting Topics
  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2008
  • Posts: 6040
Re: New Toy, but where in seattle area to get it scoped
« Reply #10 on: January 31, 2013, 08:02:11 AM »
Have several Nikon Monarchs....great scopes. :tup:
"About the time you realize that your father was a smart man, you have a teenager telling you just how stupid you are."

Offline Bob33

  • Global Moderator
  • Trade Count: (+3)
  • Legend
  • *****
  • Join Date: Apr 2009
  • Posts: 21762
  • Groups: SCI, RMEF, NRA, Hunter Education
Re: New Toy, but where in seattle area to get it scoped
« Reply #11 on: January 31, 2013, 08:06:30 AM »
Two things to watch for: don't overtighten the ring screws; take care to keep the reticle vertically and horizontally aligned with the gun. :tup:
Nature. It's cheaper than therapy.

Offline huntnphool

  • Chance favors the prepared mind!
  • Political & Covid-19 Topics
  • Trade Count: (+15)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 32903
  • Location: Pacific NorthWest
Re: New Toy, but where in seattle area to get it scoped
« Reply #12 on: January 31, 2013, 02:15:26 PM »
Funny, last time I purchased and posted a "New Toy" there were a bunch of whiners complaint that I was being irresponsible and should not call my firearms toys.
The things that come to those who wait, may be the things left by those who got there first!

Offline h20hunter

  • Trade Count: (+16)
  • Legend
  • ******
  • Join Date: Jan 2010
  • Posts: 20872
  • Location: Lake Stevens
Re: New Toy, but where in seattle area to get it scoped
« Reply #13 on: January 31, 2013, 02:18:46 PM »
Nice TOY....let us know how it shoots.

Offline Bob33

  • Global Moderator
  • Trade Count: (+3)
  • Legend
  • *****
  • Join Date: Apr 2009
  • Posts: 21762
  • Groups: SCI, RMEF, NRA, Hunter Education
Re: New Toy, but where in seattle area to get it scoped
« Reply #14 on: January 31, 2013, 02:25:26 PM »
It's pretty hard to do something wrong. One of the biggest risks is overtightening and stripping the threads of some of the screws.

I bought a tool a few years back that I have found quite helpful. It's essentially a torque screwdriver. It's called the Wheeler Torque Wrench. Cabelas and most of the major outdoor shops sell it for around $50 (the price of one visit to a smith.) You can set the desired torque, and the screwdriver will stop tightening when it reaches that setting. For most scope mount ring screws you don't want to tighten them more than 20 inch pounds, but check with the manufactor (many list the torques settings on the package or you can look them up online.)

As an added benefit, if you tighten the screws properly you really don't need locktite, nail polish etc.  It's also great for tightening action screws correctly.

I googled it:

http://www.cabelas.com/product/Shooting/Gun-Maintenance/Gun-Smithing%7C/pc/104792580/c/104814180/sc/104370480/Wheeler-Torque-Fat-Wrench/731992.uts?destination=%2Fcatalog%2Fbrowse.cmd%3FN%3D1102327%26WTz_l%3DSBC%253BBRprd731992&WTz_l=SBC%3BBRprd731992%3Bcat104370480

Nature. It's cheaper than therapy.

 


* Advertisement

* Recent Topics

Bonaparte Lake by Birdguy
[Today at 08:26:21 PM]


New to bear hunting by JDArms1240
[Today at 08:24:47 PM]


Honda BF15A Outboard Problems - FIXED! by pickardjw
[Today at 06:51:52 PM]


Spot lock in the salt? by Stein
[Today at 06:08:58 PM]


More Kings! by Stein
[Today at 06:06:46 PM]


49 Degrees North Early Bull Moose by NOCK NOCK
[Today at 05:03:06 PM]


Seeking packer OnCall for early archery unit 328 Naneum/Colockum by Bone collector 13
[Today at 04:22:07 PM]


2025 Crab! by Stein
[Today at 03:05:47 PM]


Air Dryer Cherries by Stein
[Today at 02:59:12 PM]


Boundary Waters walleye trip by jackelope
[Today at 02:08:52 PM]


Sockeye Numbers by Southpole
[Today at 10:08:15 AM]


Winchester model 97 will not cycle by mudflat mike
[Today at 09:29:17 AM]


2025 Area 9 King Opener by 30.06
[Today at 07:36:20 AM]


Crabbing at cornet bay? by swanderek
[Today at 07:31:00 AM]


Non-Shoulder mount elk ideas by Rob
[Today at 06:24:17 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal