collapse

Advertisement


Author Topic: decent groupings beyond 300 yds with factory ammo?  (Read 4670 times)

Offline wooltie

  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Oct 2011
  • Posts: 493
  • Location: Whatcom County
decent groupings beyond 300 yds with factory ammo?
« on: March 30, 2016, 11:27:08 AM »
Question for those experienced handloaders and factory ammo shooters--

Can achieve a decent grouping beyond 300 yards with factory ammo?

Suppose benchrest conditions, you know how to shoot, you have 1 moa groups at 100 yards, using a common round (.308/30-06/.270).  Can you maintain an accurate and precise group at 350? 400?  Or does your 3-4" group at 300 yards become a 5-6" group at 300 yds?


Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8994
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #1 on: March 30, 2016, 11:31:01 AM »
Question for those experienced handloaders and factory ammo shooters--

Can achieve a decent grouping beyond 300 yards with factory ammo?

Suppose benchrest conditions, you know how to shoot, you have 1 moa groups at 100 yards, using a common round (.308/30-06/.270).  Can you maintain an accurate and precise group at 350? 400?  Or does your 3-4" group at 300 yards become a 5-6" group at 300 yds?

If you are shooting 1.5 MOA at 100 then (in theory) you are shooting 1.5 MOA at 500 which should be considered unacceptable for medium-long range hunting.

Now if you find a good factory ammunition that is consistent enough and groups in your specific weapon at 100 yards, let it run at 300 and see what you find.
Kindly do not attempt to cloud the issue with too many facts.

Offline JDHasty

  • Past Sponsor
  • Trade Count: (+2)
  • Old Salt
  • *****
  • Join Date: Jul 2015
  • Posts: 7006
  • Location: Tacoma
  • Groups: NRA Benefactor Member, GOA Life Member, Father of 3 NRA Life Members
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #2 on: March 30, 2016, 11:53:52 AM »
Question for those experienced handloaders and factory ammo shooters--

Can achieve a decent grouping beyond 300 yards with factory ammo?

Suppose benchrest conditions, you know how to shoot, you have 1 moa groups at 100 yards, using a common round (.308/30-06/.270).  Can you maintain an accurate and precise group at 350? 400?  Or does your 3-4" group at 300 yards become a 5-6" group at 300 yds?

If you are shooting 1.5 MOA at 100 then (in theory) you are shooting 1.5 MOA at 500 which should be considered unacceptable for medium-long range hunting.

Now if you find a good factory ammunition that is consistent enough and groups in your specific weapon at 100 yards, let it run at 300 and see what you find.

It depends.  If you are shooting 1.5 MOA at 100 you are not necessarily shooting 1.5 MOA at 500.  There are a lot of factors that come into play, but if you have an accurate 100 yard load that is a good place to start when looking for an accurate long range load. 

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8994
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #3 on: March 30, 2016, 11:55:46 AM »
Yes, that is why I said "in theory"

Kindly do not attempt to cloud the issue with too many facts.

Offline Bob33

  • Global Moderator
  • Trade Count: (+3)
  • Legend
  • *****
  • Join Date: Apr 2009
  • Posts: 21747
  • Groups: SCI, RMEF, NRA, Hunter Education
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #4 on: March 30, 2016, 11:56:44 AM »
"Factory" vs. "handload" makes no difference once the bullet leaves the barrel.

If a factory load is accurate enough then, it's accurate enough. The definition of "enough" will depend on your requirements. A gun/load combination that shoots 1.5 MOA at 100 yards should in theory shoot 1.5 MOA at 500 yards which is approximately a 7.5" group size. That should be more than good enough for a larger animal such as an elk but probably marginal for a smaller animal such as an antelope.

The Distance/MOA relationship can change as distances increase due to factors such as wind, which matters little at 100 yards but at 500 yards could easily move a bullet a foot or more.

The only way to know for sure it to shoot some paper at various distances. Once group sizes start getting larger than 6'-8" you're probably reaching an ethical limit.

FYI I've shot some very accurate factory ammunition that groups well at 600 yards.
Nature. It's cheaper than therapy.

Offline theleo

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1212
  • Location: Kennewick
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #5 on: March 30, 2016, 12:31:43 PM »
I'll be the stick in the mud and go head and say it, your rifle will like what it likes.

You may stumble onto a rifle that absolutely loves Remington green box ammo and shoots it incredibly well or you might get a rifle that absolutely hates every factory round you feed it. Hand loading simply lets us play with more variables but that doesn't mean that all those variables won't add up to being the exact same round as one that comes out of a factory.

Offline ELKBURGER

  • Washington For Wildlife
  • Trade Count: (+18)
  • Frontiersman
  • *****
  • Join Date: Nov 2008
  • Posts: 2527
  • Location: La Center, Wa
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #6 on: March 30, 2016, 02:44:08 PM »
I feel that most factory loads are as consistent as the average hand loader's loads.

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8994
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #7 on: March 30, 2016, 03:11:37 PM »
I feel that most factory loads are as consistent as the average hand loader's loads.

It's often more about finding the right load combo than the consistency of powder/seating depth/etc.
Kindly do not attempt to cloud the issue with too many facts.

Offline JDHasty

  • Past Sponsor
  • Trade Count: (+2)
  • Old Salt
  • *****
  • Join Date: Jul 2015
  • Posts: 7006
  • Location: Tacoma
  • Groups: NRA Benefactor Member, GOA Life Member, Father of 3 NRA Life Members
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #8 on: March 30, 2016, 03:16:18 PM »
I feel that most factory loads are as consistent as the average hand loader's loads.

I don't have an opinion.  I doubt I have shot more than ten twenty-round boxes of factory loaded center-fire rifle ammo in my life and I used to get it given to me @ no charge.

Offline DOUBLELUNG

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 5837
  • Location: Wenatchee
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #9 on: March 30, 2016, 03:29:42 PM »
My .308 will average 0.6" groups at 100 yards with its preferred factory ammo, more like 1.5" at 200yards, 2.5-3" at 300, 5-6" at 400.  Shooting prone off bipod to mimic hunting conditions.  I blame environmental variables and the loose nut behind the trigger for the worse than algebraic performance at longer ranges. 
As long as we have the habitat, we can argue forever about who gets to kill what and when.  No habitat = no game.

Offline jkononen

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Nov 2007
  • Posts: 447
  • Location: Sedro-Woolley, Wa
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #10 on: March 30, 2016, 04:36:47 PM »
Don't forget your speed not being consistent with factory ammo. So even if your gun groups 1 moa at 100 it won't group that at 500.
we live for the nights we never remember with the people we'll never forget

Offline kentrek

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2012
  • Posts: 3491
  • Location: west coast
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #11 on: March 30, 2016, 05:33:13 PM »
I've always found too much velocity deviation in factory ammo....i haven't ran everything through a chrono but a pretty good amount and was always suprised of how poor the results are

I missed a bear due to this

Offline Bill W

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2013
  • Posts: 1942
  • Location: Moses Lake
  • Groups: NRA, CBA
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #12 on: March 30, 2016, 05:53:37 PM »
The math guys tell me that group sizes don't get bigger in a linear fashion.    Wind and mirage have more of an impact on group size at the longer distances.

If I had a gun that grouped 7.5 inches at 500 yards per Jonathan's example I wouldn't rule out a 500 yard shot if the conditions are favorable.   The kill zone on a deer is 10 inches x 10 inches.

Offline Jonathan_S

  • Trade Count: (+6)
  • Old Salt
  • ******
  • Join Date: Oct 2012
  • Posts: 8994
  • Location: Medical Lake
  • Volleyfire Brigade, Cryder apologist
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #13 on: March 30, 2016, 06:05:50 PM »
The math guys tell me that group sizes don't get bigger in a linear fashion.    Wind and mirage have more of an impact on group size at the longer distances.

If I had a gun that grouped 7.5 inches at 500 yards per Jonathan's example I wouldn't rule out a 500 yard shot if the conditions are favorable.   The kill zone on a deer is 10 inches x 10 inches.

That 7.5 inches is not factoring human error though. Somebody who settles for 1.5 MOA probably settles for not that much range time  :twocents:

Kindly do not attempt to cloud the issue with too many facts.

Offline Reidus

  • Trade Count: (+15)
  • Longhunter
  • *****
  • Join Date: Oct 2013
  • Posts: 877
  • Location: Tri-Cities
Re: decent groupings beyond 300 yds with factory ammo?
« Reply #14 on: March 30, 2016, 09:54:55 PM »
If you have 2 loads 1 factory and 1 handload that both shoot 1moa at 100 yd, the one with a more consistent velocity will most likely be more accurate at 500 yds. If the bc's are different it will also make a difference. I've gotten paper plate size groups with factory ammo in my savage 300 wsm at 500 yds. I may be able to reduce this a little with handloads but it works pretty good for hunting.

 


* Advertisement

* Recent Topics

Looking for people to hunt with. by Sp1cyBoog
[Today at 03:00:08 PM]


506 Willapa Hills Late Season Antlerless Tag by Tinmaniac
[Today at 02:54:55 PM]


My Brothers First Blacktail by 3nails
[Today at 02:22:32 PM]


Rimrock Bull: Modern by jeffitz
[Today at 02:19:33 PM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Today at 01:17:34 PM]


Idaho 2025 Controlled Hunts by JDArms1240
[Today at 12:30:04 PM]


2025-2026 Regs by duckmen1
[Today at 11:22:16 AM]


DR Brush Mower won't crank by jackelope
[Today at 11:12:40 AM]


Tooth age on Quinault bull by jeffitz
[Today at 10:16:48 AM]


HUNTNNW 2025 trail cam thread and photos by Feathernfurr
[Today at 09:50:13 AM]


Wyoming Antelope Unit 80 by tntklundt
[Today at 07:51:23 AM]


Stillaguamish 448 QD rifle tag by Turner89
[Today at 07:32:13 AM]


Pack mules/llamas by Shooter4
[Yesterday at 07:59:16 PM]


Kinda fun LH rimfire rifle project by JDHasty
[Yesterday at 07:01:44 PM]


Non-Shoulder mount elk ideas by Pete112288
[Yesterday at 06:45:10 PM]


SE raffle tags holder by redi
[Yesterday at 06:09:09 PM]


Dang bears... by Lumpy Taters
[Yesterday at 05:16:31 PM]


May/June Trail Cam: Roosevelt Bull Elk & Blacktail Bucks with Promising Growth by Lumpy Taters
[Yesterday at 05:13:15 PM]


Little Natchez cow elk by royalbull
[Yesterday at 03:39:11 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal