collapse

Advertisement


Author Topic: Peep rotation - is it a problem?  (Read 4800 times)

Offline Band

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2010
  • Posts: 3360
Peep rotation - is it a problem?
« on: May 23, 2016, 08:49:05 PM »
My rather new string is having a problem with peep rotation.  It rotates 90 degrees from rest to full draw regardless of what position it is in at rest.  I wondered if the string might stretch out and somehow eliminate the problem over time but I have about 500 shots and still have the same problem.  Currently it is set 90 degrees off at rest so it rotates to a useable position during the shot.

Is this a problem?  Can't say I've really had this situation before and this string even has a 1 year warranty against peep rotation.  I have a return authorization but I'm not sure I want to send it back since it's possible they'll tell me the problem was with the installation or who knows what and simply send the same string back to me.  From experience I trust my bow shop and can't imagine they did anything wrong.  What would you do?


Offline LeviD1

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Oct 2014
  • Posts: 458
  • Location: Spokane
  • Groups: Evergreen Archery, Spokane Rifle Club, RMEF
Re: Peep rotation - is it a problem?
« Reply #1 on: May 23, 2016, 08:53:47 PM »
Do you just need to rotate your d loop so the peep rotates to be straight? Or even when you do this the peep rotates at full draw no matter where your d loop is set?

Offline Band

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2010
  • Posts: 3360
Re: Peep rotation - is it a problem?
« Reply #2 on: May 23, 2016, 09:03:52 PM »
It rotates no matter where my D loop is set.

Offline LeviD1

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Oct 2014
  • Posts: 458
  • Location: Spokane
  • Groups: Evergreen Archery, Spokane Rifle Club, RMEF
Re: Peep rotation - is it a problem?
« Reply #3 on: May 23, 2016, 09:54:36 PM »
Your sure its a higher quality pre stretched string? If so I would take it back to your bow shop and have them fix whatever the issue is. A good quality string that is pre stretched you shouldn't have that issue at all. Lower quality strings you will. Lower quality strings just cant use a no tube peep nomatter how many shots you put through them a lot of the time.

Offline Special T

  • Truth the new Hate Speech.
  • Business Sponsor
  • Trade Count: (+13)
  • Legend
  • *****
  • Join Date: Aug 2009
  • Posts: 25052
  • Location: Skagit Valley
  • Make it Rain!
    • Silver Arrow Bowmen
    • Silver Arrow Bowmen
Re: Peep rotation - is it a problem?
« Reply #4 on: May 23, 2016, 10:04:01 PM »
adjusting your D loop will solve this issue.. Unfortunately you will have to adjust from time to time.
In archery we have something like the way of the superior man. When the archer misses the center of the target, he turns round and seeks for the cause of his failure in himself. 

Confucius

Offline Antlershed

  • Trade Count: (+8)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 4823
  • Location: Olympia, WA
Re: Peep rotation - is it a problem?
« Reply #5 on: May 23, 2016, 10:08:10 PM »
Is your d loop AND peep turned 90 degrees when at rest?

Offline D-Rock425

  • Washington For Wildlife
  • Trade Count: (+12)
  • Explorer
  • ******
  • Join Date: Jun 2009
  • Posts: 13265
  • Location: Lake stevens
Re: Peep rotation - is it a problem?
« Reply #6 on: May 24, 2016, 09:34:20 AM »
Shouldn't need to send it back any pro shot should be able to do a quick adjustment and have you back on track.

Offline pianoman9701

  • Mushroom Man
  • Business Sponsor
  • Trade Count: (+5)
  • Legend
  • *****
  • Join Date: Mar 2011
  • Posts: 45062
  • Location: Vancouver USA
  • WWC, NRA Life, WFW, NAGR, RMEF, WSB, NMLS #2014743
    • www.facebook.com/johnwallacemortgage
    • John Wallace Mortgage
Re: Peep rotation - is it a problem?
« Reply #7 on: May 24, 2016, 09:38:28 AM »
I got the expensive strings this time and the peep has rotated enough for me to have it adjusted twice. Stuff happens. You can always go to a rubber tube but it's just another thing to break on you when you need it.
"Restricting the rights of law-abiding citizens based on the actions of criminals and madmen will have no positive effect on the future acts of criminals and madmen. It will only serve to reduce individual rights and the very security of our republic." - Pianoman https://linktr.ee/johnlwallace https://valoaneducator.tv/johnwallace-2014743

Offline Rainier10

  • Administrator
  • Trade Count: (+5)
  • Explorer
  • *****
  • Join Date: Dec 2010
  • Posts: 16091
  • Location: Over the edge
Re: Peep rotation - is it a problem?
« Reply #8 on: May 24, 2016, 09:42:01 AM »
I would start back at the pro shop and see if they can adjust it, then go the return route if they can't fix it.
Pain is temporary, achieving the goal is worth it.

I didn't say it would be easy, I said it would be worth it.

Every father should remember that one day his children will follow his example instead of his advice.


The views and opinions expressed in this post are those of the author and do not necessarily reflect the official policy or position of HuntWa or the site owner.

Offline Band

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Aug 2010
  • Posts: 3360
Re: Peep rotation - is it a problem?
« Reply #9 on: May 24, 2016, 03:46:45 PM »
Is your d loop AND peep turned 90 degrees when at rest?
No, my D loop is facing straight back where it should be.  But the peep is sitting 90 degrees off so it will come into position at full draw.

Offline LeviD1

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Oct 2014
  • Posts: 458
  • Location: Spokane
  • Groups: Evergreen Archery, Spokane Rifle Club, RMEF
Re: Peep rotation - is it a problem?
« Reply #10 on: May 24, 2016, 05:37:27 PM »
With your string at rest line your d loop up with your peep. That way when you draw it pulls your peep straight. This is what I was trying to get at in my original response. Your peep will never be perfectly straight back usually. You have to use your d loop to pull it straight .

Offline bowtechian

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2014
  • Posts: 388
  • Location: whidbey island
  • Groups: rmef,wwa,nra, & du
Re: Peep rotation - is it a problem?
« Reply #11 on: June 06, 2016, 08:54:04 PM »
Are your strings even shot in yet? Is your shop close enough to just have them help you out?

Sent from my C811 4G using Tapatalk


 


* Advertisement

* Recent Topics

Need a meat processor and taxidermist around gmu 113 by teanawayslayer
[Today at 02:03:19 PM]


WHAT DID YOUR TRUCK COST NEW? by Dan-o
[Today at 02:02:24 PM]


Saturday double on black bears by Dan-o
[Today at 02:01:14 PM]


Now Licensed in Idaho, Washington, and Oregon by pianoman9701
[Today at 01:37:15 PM]


CWD according to Uncle Ted by hughjorgan
[Today at 01:18:27 PM]


Pinks! by bigtex
[Today at 01:06:39 PM]


49 Degrees North Early Bull Moose by Kdog
[Today at 01:06:05 PM]


One day and a wake-up by Bearhunter308
[Today at 12:14:42 PM]


Hawke creek in November? by syoungs
[Today at 12:11:21 PM]


GROUSE 2025...the Season is looming! by TeacherMan
[Today at 11:22:52 AM]


CWD testing in ALL 100 series GMU's is now mandatory by Ridgeratt
[Today at 10:46:58 AM]


Idaho Elk and Deer Hunters by Machias
[Today at 09:28:30 AM]


Nooksack Muzzleloader Bull Tag by freezerfull
[Today at 09:25:37 AM]


Bear in 568 by cking96000
[Today at 08:13:09 AM]


GMU 1[emoji2390][emoji[emoji2390][emoji[emoji2390]391]9[emoji2390]] closed for cougar by hunter100
[Today at 06:48:15 AM]


MA-10 Coho by BLH69
[Today at 05:15:33 AM]


Berry Report? by birdshooter1189
[Yesterday at 09:44:23 PM]


2025 Quality Chewuch Tag by Schmalzfam
[Yesterday at 09:33:01 PM]


Help!! Blew out my boots. by Remnar
[Yesterday at 08:34:42 PM]


MOVED: Free Motorcyle trailer by bearpaw
[Yesterday at 05:56:03 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal