collapse

Advertisement


Author Topic: 6.5 PRC reloading  (Read 3416 times)

Offline Taco280AI

  • Past Sponsor
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jan 2013
  • Posts: 2961
  • Location: FL350
Re: 6.5 PRC reloading
« Reply #15 on: March 02, 2024, 10:45:01 AM »
I'd go with a Barnes LRX or Hammer bullet, forget target and "match" bullets on game.

Don't remember the charge, but worked up a load for a buddy with H4831. Took a while to find what it liked, but once I did it was just under half MOA.

Offline chukar58

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2012
  • Posts: 233
  • Location: westside
  • What's in your freezer?
  • Groups: Washington State Bowhunters, RMEF
Re: 6.5 PRC reloading
« Reply #16 on: March 02, 2024, 10:52:20 AM »
For my 6.5 PRC I have had good results with the accubonds and H4831SC at about 2950fps.   I was told by some that if you push the accubond too fast at close range the will not hold up,  these people were hunting elk.  I have killed a few deer with my loading and the terminal performance has been fabulous.  The one bullet I recovered was a nice mushroom with about 68% weight retention at about 100 yards.   Lots of good bullets and powders for the 6.5 PRC and what you can do with them. 

Offline Caseknife

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Apr 2013
  • Posts: 598
  • Location: Colville
  • Groups: RMEF, NRA, SCI
Re: 6.5 PRC reloading
« Reply #17 on: March 23, 2024, 08:39:50 PM »
127 LRX with a case full of RL25 at 3200, kills great.

 


* Advertisement

SimplePortal 2.3.7 © 2008-2025, SimplePortal