Free: Contests & Raffles.
So bottom line is bought to light of an arrow to meet the 6 gr p/pound of draw weight requirement. 10 grains keeps you legal added to a 100 grain broadhead + knock, etc.. yes to light of total, you need 408grains total to be legal in this state. at 68lbs best way is to use a scale and make sure you are spot on or over in this case to make sure you don't get a nasty ticket.
Well, you can probably include the weight of the knock, insert and fletching, as well.So, using weights for the nfused Axis 400 components (probably different than yours but maybe you can use as loose guidelines), you can get:your arrow (assuming 29 inches at 8.5gr/in): 246.5gr Insert: 16 grknock: 9 grfletching (I used Blazers at about 6gr each X 3): 18 grbroadhead: 100 grTOTAL: 389.5**I have not validated any of the weights myself. These are just what I got from websites, so actuals could be off a bit. I really need to buy a scale.If you went to a 125gr broadhead you could go to 414.5. And, if you wanted to keep your arrows and didn't mind re-fletching, you could add an arrow wrap at about 10gr making it even heavier. However, I suspect you might already be underspined and the heavier broadhead might cause you problems. Probably just go with 340 spine arrows.I just felt like doing some math. I also saw this thread and made me realize that I have new arrows this year so I better check them (mine are coming in at 412 gr). 340 spine, arrows are 27.75 inches, 100gr G5 Striker broadheads, arrow wrap, 3 Blazers.
You will all be happy to know that I now have the proper set up...Easton full metal jacket arrows, 340, 11.5 grains per inch, 29 inches, 70 lbs, 100 grain G5 broad head.. sound acceptable?