collapse

Advertisement


Author Topic: Scope height question  (Read 1807 times)

Offline jstone

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jul 2009
  • Posts: 6273
Scope height question
« on: August 11, 2020, 11:31:39 AM »
I installed a scope onto my 7mm mag. I installed a solid mount. The middle of the scope is 2” high from top of barrel to the center is the scope. Is this to high? What will the difference be if to high?

Thank you for your responses

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12521
  • Location: Arlington
Re: Scope height question
« Reply #1 on: August 11, 2020, 11:35:43 AM »
Scope height is a variable in ballistic calculations.

The other factor is getting a good view through the scope while maintaining a cheek weld.

I always try to mount the scope as low on the rifle as possible, ideally the bell is very close to touching the barrel, but that's for my rifle which doesn't have an adjustable cheek piece.

Offline buckfvr

  • Washington For Wildlife
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jun 2010
  • Posts: 4508
  • Location: UNGULATE FREE ZONE UNIT 121
Re: Scope height question
« Reply #2 on: August 11, 2020, 01:10:07 PM »
Picture, so like said keep it low enough to get your cheek comfortably on the stock, if you cant then get a Karsten cheek pad. 

Offline Bushcraft

  • Non-Hunting Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2008
  • Posts: 1120
  • Location: Olympic Peninsula
  • Groups: NRA, SCI, NSSF, RMEF, RMGA, MDF, WSF, DU, HHC, WWC, WDAC
Re: Scope height question
« Reply #3 on: August 11, 2020, 04:58:28 PM »
Within reason, scope height over bore is largely irrelevant so long as you understand the affect on trajectory.

What you're trying to achieve is a comfortable and repeatable alignment of your eye and the scope with a good cheek weld.
Socialism is the philosophy of failure, the creed of ignorance, and the gospel of envy; its inherent virtue is the equal sharing of misery. - Winston Churchill

Work hard. Hunt hard. Lift other hunters up.

*Proud supporter of NRA, NRA-ILA SCI, SCIF, SCI-PAC, NSSF, RMEF, RMGA, MDF, WSF, DU, WWA, HHC, WWC

Offline BigGoonTuna

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 2375
  • Location: Yelm
Re: Scope height question
« Reply #4 on: August 11, 2020, 05:28:15 PM »
Close your eyes and shoulder your rifle, then open them. If you’re getting a good sight picture in your scope, then you’re all set. If you have to stretch your neck out some unnatural way then they’re probably too high  :chuckle:

Conventional wisdom says to use the lowest rings you can get away with but everyone is different. The American way of shouldering a rifle is to try to crane one’s neck forward and crawl the stock, the Europeans like to shoot with their head straight up, so they like taller mounts.
you can still get gas in heaven, and a drink in kingdom come,
in the meantime, i'll be cleaning my gun

Offline jstone

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jul 2009
  • Posts: 6273
Re: Scope height question
« Reply #5 on: August 11, 2020, 05:44:32 PM »
Thank you everyone

Offline jaymark6655

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Aug 2009
  • Posts: 1879
  • Location: Bedford, IN
Re: Scope height question
« Reply #6 on: August 11, 2020, 07:29:17 PM »
I use whatever rings will keep the scope clear of the barrel or stock/chassis. From there its just a question of getting proper eye relief and eye alignment. Only other time it will matter is if you are using a ballistic calculator/app. Cheek pads can help with sight alignment, but butt pad might need adjustment too (if possible).
"That's the reason we pay $25 for a recoil lug made by a professional instead of one for $0.50 made by Micheal J Fox using a dremel!"

"Women should be treated the same as a French Rifle, dropped at the first sign of trouble."

Offline birdstew

  • WA State Trappers Association
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2013
  • Posts: 126
  • Location: Chehalis
Re: Scope height question
« Reply #7 on: August 11, 2020, 08:50:55 PM »
I’m sure there are some people on here that use see Thru Scope Rings, and those set higher than 2inches.

With many stocks I have a problem with getting proper eye alignment so I got a Bradley cheek rest. No drilling holes in stocks and I can use on more than one rifle.

Offline fly-by

  • Forum Sponsor
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Nov 2011
  • Posts: 551
  • Location: Snoqualmie, WA
Re: Scope height question
« Reply #8 on: August 11, 2020, 09:00:51 PM »
Your anatomy is a big factor but I find that even with the lowest mounts that allow bell to barrel clearance, I still need  to pad the stock. Also consider that going too low may limit rearward travel of the scope between the rings before the  bell bumps into the barrel shank, impacting your eye relief.

 


* Advertisement

* Recent Topics

Walked a cougar down by Rainier10
[Today at 11:17:49 AM]


Springer Fishing Opportunity 3/29 & 3/30 by xXLojackXx
[Today at 10:13:39 AM]


Bearpaw Season - Spring 2024 by Machias
[Today at 09:19:44 AM]


SB 5444 signed by Inslee on 03/26 Takes Effect on 06/06/24 by hughjorgan
[Today at 09:03:26 AM]


Springer 2024 Columbia River by WSU
[Today at 08:31:10 AM]


Average by lhrbull
[Today at 07:31:56 AM]


Let’s see your best Washington buck by Pathfinder101
[Today at 07:22:11 AM]


CVA optima V2 LR tapped hole for front sight by Remdawg
[Today at 07:09:22 AM]


Which 12” boat trailer tires? by timberhunter
[Yesterday at 08:22:18 PM]


Lowest power 22 round? by JakeLand
[Yesterday at 08:06:13 PM]


1x scopes vs open sights by JakeLand
[Yesterday at 07:29:35 PM]

SimplePortal 2.3.7 © 2008-2024, SimplePortal