collapse

Advertisement


Author Topic: Sierra Relaoding Manuel  (Read 1825 times)

Offline Wazukie

  • Business Sponsor
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 2674
  • Location: The Woods
  • Groups: NRA
Sierra Relaoding Manuel
« on: July 03, 2012, 03:51:46 PM »
I am looking for a max load on a Sierra 100 Grain Gameking Spitzer Boat tail for the .243 out of their manual if anyone has one.
Thanks
Matthew 6:33

Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: Sierra Relaoding Manuel
« Reply #1 on: July 04, 2012, 08:43:55 AM »
Powder? Mag. primer?
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline Wazukie

  • Business Sponsor
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 2674
  • Location: The Woods
  • Groups: NRA
Re: Sierra Relaoding Manuel
« Reply #2 on: July 04, 2012, 08:49:37 AM »
Woops, forgot what powder.  For both H4350 and H4831SC.  And if you have the book, max load for the 180 gr w/4350 for the 300 WSM
Matthew 6:33

Offline BOWHUNTER45

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Nov 2009
  • Posts: 14731
Re: Sierra Relaoding Manuel
« Reply #3 on: July 04, 2012, 09:37:56 AM »
I usually do not like given out loads on the internet but since I have loaded millions of .243 Sierra bullets and Here is my best load ever ...IMR 4350 41.3 GRAINS .....I seat my bullets an  over all length of 2.630"  ...CCI 200 primers ....give it a try and let me know how ya do !!!  Just remember to squeeze the trigger  :dunno: :chuckle: :chuckle:

Offline smdave

  • Non-Hunting Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1560
  • Location: WA
    • My Photobooth
Re: Sierra Relaoding Manuel
« Reply #4 on: July 04, 2012, 09:43:07 AM »
oops
When I pass, do not let my wife sell the guns for what I told her they cost.

Offline Wazukie

  • Business Sponsor
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Nov 2009
  • Posts: 2674
  • Location: The Woods
  • Groups: NRA
Re: Sierra Relaoding Manuel
« Reply #5 on: July 04, 2012, 09:53:06 AM »
Was just looking for what the sierra manual had for a max load, but that helps.  Right now I'm running 42 grains of varget with the 100's.  Very hot load compared to what the Lyman manual, it lists a mx of 34.5 grn.  I'm wanting to try 4350 and 4831sc though and was just wondering what the book says for max.  Guess I'll either buy it or just start with what the Lyman book says.
Matthew 6:33

Offline BOWHUNTER45

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Nov 2009
  • Posts: 14731
Re: Sierra Relaoding Manuel
« Reply #6 on: July 04, 2012, 10:00:48 AM »
give me a minute and I will look it up ..... I use three books ...Lyman -hornaday and Sierra ...usually out of the 3 I can come up with some good loads ...


O.K Here ya go .... IMR 4350 MAX LOAD 42.3 GRAINS
                            IMR 4831  MAX LOAD 44.2 GRAINS
                            H4831 MAX LOAD 44.9 GRAINS
                            IMR 4064 MAX LOAD 36.3   ( I find this powder to shoot seriously well too out of a .243)
« Last Edit: July 04, 2012, 10:07:16 AM by BOWHUNTER45 »

 


* Advertisement

SimplePortal 2.3.7 © 2008-2025, SimplePortal