collapse

Advertisement


Author Topic: My moose load is ironed out!  (Read 4635 times)

Offline Rufous

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2007
  • Posts: 527
  • Location: Arkansas
My moose load is ironed out!
« on: August 22, 2008, 08:40:06 PM »
I was out shooting this evening just to verify my zero before going out for a mountain lion hunt tomorrow (more like a hike with a very slim chance of seeing a cougar but at least I will be hunting and in the hills). I am shooting a 300 Win Mag with the Barnes 180 TSX and am using RL22. I like to zero my rifle at 250 yards so I fired 3 shots and got a 1.2" group. Then I moved my bench out to 500 yards and used the appropriate aim point on my Leupold 3.5-10 with the Boone and Crockett reticle and fired another 3 shots which measured 2.6". All 6 shots fired made a 2.7" group with the 250 yard group nestled within the 500 yard group. So I am ready for mountain lions tomorrow and for moose come October. I have tried the Barnes 168 TTSX and the Nosler 200 Partition some but the 180 TSX is giving the most consistent accuracy. Brian

Online Ghost Hunter

  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 5438
  • Location: SW <-> NE
  • Groups: NRA Patron Life Member, RMEF Life, Sponser Member
Re: My moose load is ironed out!
« Reply #1 on: August 22, 2008, 09:14:28 PM »
Sounds like you got it dialed in!!  Was thinking on trying the TSX in my 300WSM.  Just mounted the same scope.
Economy failure = Too many people spending money they don't have on things they don't need to impress people they don't like.

Offline blessed

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Jul 2008
  • Posts: 264
Re: My moose load is ironed out!
« Reply #2 on: August 22, 2008, 09:22:00 PM »
Hay Brian, sounds like you're loaded for bear!  :yike: Sure would be nice if you would get rid of a cat or two and save out deer and elk. I scouted the moose area over the last 3 days and The people up at the noorth end say most the moose are up there. Then the people on the south half say most the moose are down there!
They all agree there's lots of moose! We only say a cpow and calf.  STB
SmokeyTbear

Offline jdb

  • the illustious potentate
  • Non-Hunting Topics
  • Trade Count: (+4)
  • Frontiersman
  • *****
  • Join Date: Jul 2007
  • Posts: 3810
  • Location: selah
Re: My moose load is ironed out!
« Reply #3 on: August 23, 2008, 09:14:09 AM »
I thought you were gonna try your .45 colt? JB
nuke the gray whales for jesus!

Offline Rufous

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2007
  • Posts: 527
  • Location: Arkansas
Re: My moose load is ironed out!
« Reply #4 on: August 23, 2008, 11:09:23 AM »
Yes I do want to try my 45 Colt but if I cannot get close enough I will use my 300 Win Mag. Brian.

Offline finnman

  • Business Sponsor
  • Trade Count: (+20)
  • Sourdough
  • *****
  • Join Date: Mar 2007
  • Posts: 1686
  • Location: Puyallup
  • I gotcha where I want ya, now I'm gonna eat ya!
Re: My moose load is ironed out!
« Reply #5 on: August 30, 2008, 05:50:07 PM »
I took the wife to the range today and got the .338 Win Mag dialed in. I got it sighted in at 250 yard zero, so we should be good for short or long range, that thing does have some bite! 6lb. 6 oz. with a 13oz. scope and some rings and bases this thing is less than 7 1/2 lbs!! She won't notice it when that bull steps into view!!!!!!

Hear we come!!

Offline huntnphool

  • Chance favors the prepared mind!
  • Political & Covid-19 Topics
  • Trade Count: (+15)
  • Legend
  • ******
  • Join Date: Apr 2007
  • Posts: 32951
  • Location: Pacific NorthWest
Re: My moose load is ironed out!
« Reply #6 on: August 30, 2008, 06:11:04 PM »
Got mine ironed out too. Jon is going to refletch my Beman ICS Hunters tipped with a 85gr. Thunderhead, right around 390gr. total. :chuckle:
The things that come to those who wait, may be the things left by those who got there first!

Offline mkcj

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jul 2007
  • Posts: 1945
  • Location: Seatac/Winthrop,Wash
Re: My moose load is ironed out!
« Reply #7 on: August 30, 2008, 06:27:48 PM »
How much RL-22 are you using

Offline Rufous

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2007
  • Posts: 527
  • Location: Arkansas
Re: My moose load is ironed out!
« Reply #8 on: August 30, 2008, 08:39:07 PM »
I am using 72.5 grains of RL22 and the Federal 210 primer with Winchester cases and am getting 3040 fps from my 25" Broughton barrel which has the 5C land. Brian.

Offline PA BEN

  • LINEMAN
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 4878
  • Location: Chewelah
Re: My moose load is ironed out!
« Reply #9 on: August 31, 2008, 06:44:10 AM »
I took the wife to the range today and got the .338 Win Mag dialed in. I got it sighted in at 250 yard zero, so we should be good for short or long range, that thing does have some bite! 6lb. 6 oz. with a 13oz. scope and some rings and bases this thing is less than 7 1/2 lbs!! She won't notice it when that bull steps into view!!!!!!

Hear we come!!
I just put a limb saver recoral pad on my 7MM Rem Mag. And it took all the bite out of it.

Offline DeKuma

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2007
  • Posts: 2016
  • Location: Burlington, WA
Re: My moose load is ironed out!
« Reply #10 on: August 31, 2008, 07:58:25 AM »
I agree with the recoil pad.  I have one on all my guns.  Took the bite out of my 300WSM and made the little 12GA comfortable for the wife even with Turkey Loads.  Worth every penny!
- Scott

Offline finnman

  • Business Sponsor
  • Trade Count: (+20)
  • Sourdough
  • *****
  • Join Date: Mar 2007
  • Posts: 1686
  • Location: Puyallup
  • I gotcha where I want ya, now I'm gonna eat ya!
Re: My moose load is ironed out!
« Reply #11 on: August 31, 2008, 11:05:26 AM »
Which one did you guys use? The slip on or the one you install in place of the factory pad.

Offline DeKuma

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2007
  • Posts: 2016
  • Location: Burlington, WA
Re: My moose load is ironed out!
« Reply #12 on: August 31, 2008, 11:44:19 AM »
I have the slip ons, because I could not find the exact fit for my Remington 600 or wifes H&R Shotgun
- Scott

Offline PA BEN

  • LINEMAN
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 4878
  • Location: Chewelah
Re: My moose load is ironed out!
« Reply #13 on: August 31, 2008, 11:49:39 AM »
I got the slip on. Took the stock pad off, it fit perfect. I picked it up at WalMart.

 


* Advertisement

* Recent Topics

Idaho Trapping Journal 2025/26 by outdooraddict
[Today at 11:21:40 AM]


WA Bucket List….Mule Deer Permit by Bearhunter
[Today at 10:36:37 AM]


Question about Hancock Timber Co Eastside by MMCCAULEY
[Today at 10:31:50 AM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by TheYoungSelfStarter
[Today at 10:29:47 AM]


Cell Cams for Westside Elk by kodiak06
[Today at 10:12:19 AM]


The Rack by Pathfinder101
[Today at 09:21:09 AM]


Smith-Reynolds American Legion Post #14 Fall Raffle by HntnFsh
[Today at 08:46:23 AM]


Idaho on the verge of outlawing by Machias
[Today at 07:51:44 AM]


HUNTNNW 2025 trail cam thread and photos by Machias
[Today at 07:50:38 AM]


Weatherby Long Range Steel Choke by Henrydog
[Today at 06:33:46 AM]


My Entiat Late tag thread by Lapua338
[Today at 06:24:08 AM]


Colockum WMA chukar hunting by Kingofthemountain83
[Yesterday at 11:44:55 PM]


Early Huckleberry Bull Moose tag drawn! by Turner89
[Yesterday at 09:15:28 PM]


Selkirk bull moose. by Turner89
[Yesterday at 08:38:02 PM]


Cleaning glass by MADMAX
[Yesterday at 07:26:32 PM]


Lion Down - the Savor of Success by DonJuan
[Yesterday at 02:22:27 PM]


Darwin Outfitters by Kingofthemountain83
[Yesterday at 12:22:38 PM]


Degreasing A Deer Skull by eyesinfront
[Yesterday at 09:47:06 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal