collapse

Advertisement


Author Topic: 270 wsm  (Read 9091 times)

Offline haugenna

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Sep 2008
  • Posts: 2205
Re: 270 wsm
« Reply #15 on: December 25, 2008, 10:24:52 PM »
does anyone have any good loads worked up for this caliber.

Picture says it all

Offline Red Dawg

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2007
  • Posts: 1945
  • Location: Granger, WA
Re: 270 wsm
« Reply #16 on: December 27, 2008, 12:58:29 PM »
that looks great. Maybe i will give that a try.

Offline C-Money

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Sep 2008
  • Posts: 11040
  • Location: Grant County
  • Self proclaimed 3pt master
Re: 270 wsm
« Reply #17 on: January 05, 2009, 06:46:39 AM »
H-4831? or H-4350 IMR 4350,4831, RL-19, 22, Put a quality 140gr bullet, and you should be fine! I would look for loads using RL-19 or IMR 4831, From what I have seen the 270wsm is not real picky!
I felt like a one legged cat trying to bury a terd on a frozen pond!

Offline wsmnut

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Dec 2008
  • Posts: 449
  • Location: Twisp, WA
Re: 270 wsm
« Reply #18 on: January 05, 2009, 07:06:36 AM »
The sweet spot for my son's was 69.7 gr. of Magpro pushing a 140 gr. TSX.
Win. brass, 215m primer.
YMMV.
Wsmnut


Belief is so often the death of reason.
Moron Lube

Offline Bigshooter

  • Political & Covid-19 Topics
  • Trade Count: (+7)
  • Old Salt
  • ******
  • Join Date: Aug 2007
  • Posts: 6366
  • Location: Lewis Co
  • High Wide And Heavy
Re: 270 wsm
« Reply #19 on: January 05, 2009, 07:37:59 PM »
Here is my load for basically the same gun at yours Winchester Ultimate Shadow 140 grain Accubonds 74 grains Magpro 3300 FPS 1/2 groups 100 hundred yards, no high pressure signs at all. This rifle is very accurate shoots everything i have fed it into 1 inch or better.  Please remember to work up to this load as it is fine in my gun but may not be in yours.

Oldlogger


Same thing here basically.  Except only 72 grains of magpro.  Shoot it out of a m70 featherweight.  At 73 grains the primers were getting a little flat.  I would start at around 68 grains and work up until you see signs of pressure.
Welcome to liberal America, where the truth is condemned and facts are ignored so as not to "offend" anyone


"Borders, language, culture."

 


* Advertisement

* Recent Topics

WSTA Winter Renezvous fur buying by Frank The Tank
[Today at 03:51:48 AM]


RV floor repair, have you done it by Scruffy
[Today at 01:10:21 AM]


Hawke scopes? by C-Money
[Yesterday at 11:38:09 PM]


Here’s my 2025 shed video by Tjv28
[Yesterday at 10:31:52 PM]


Spring bear 2026 by Ridgerunner
[Yesterday at 10:11:55 PM]


Pizza, a love story by WapitiTalk1
[Yesterday at 09:16:55 PM]


Fuel transfer pump by Kingofthemountain83
[Yesterday at 09:06:09 PM]


Springfield 1898 30-40 KRAG by bb76
[Yesterday at 08:01:58 PM]


WHCE Expo 2026 by teanawayslayer
[Yesterday at 07:42:37 PM]


Arizona credit card hits by Beastmonger1987
[Yesterday at 07:21:29 PM]


Where to buy beef? by jackelope
[Yesterday at 07:19:14 PM]


My New Boat Should Be Ready For Delivery Soon by Blacklab
[Yesterday at 06:54:32 PM]


2026 Sportsmen for Conservation Fund Banquet Hosted by SCI Northwest Chapter by videorc
[Yesterday at 04:25:12 PM]


Blacktail Trophy Tactics Hunting Event: Free for Veterans/Active Duty by Kingofthemountain83
[Yesterday at 04:13:56 PM]


Calling Cougars? by rainshadow1
[Yesterday at 01:53:27 PM]


Shoot or No Shot 2026 – Episode #2 by High Climber
[Yesterday at 01:45:06 PM]


me and my son headed east for our 2nd turkey season by MMCCAULEY
[Yesterday at 12:13:24 PM]


Yellow Perch tips? Snohomish county by AL WORRELLS KID
[Yesterday at 11:56:49 AM]


Brother's Ram by bearhunter99
[Yesterday at 09:24:45 AM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal