Author Topic: Need a killer smoker donar? (Read 7842 times)

Kc_Kracker · « **on:** January 21, 2013, 06:21:28 PM »

http://seattle.craigslist.org/see/atq/3561070844.html

huntergreg · « **Reply #1 on:** January 21, 2013, 06:28:09 PM »

I have a big commercial 3 door stainless steel freezer. it is 72 in. long 32 in. deep and 80 in. tall. Would something like that work very good for a smoker? There is plastic shelves in the doors that can be easily removed. The compressor went out on it.

Kc_Kracker · « **Reply #2 on:** January 21, 2013, 06:39:11 PM »

ditch the plastic and yes, any kind of insulation?

huntergreg · « **Reply #3 on:** January 21, 2013, 06:48:55 PM »

the inside is also stainless most likely there is some insulation between the inside and outside layer of stainless.

billythekidrock · « **Reply #4 on:** January 21, 2013, 06:51:15 PM »

Quote from: huntergreg on January 21, 2013, 06:28:09 PM

I have a big commercial 3 door stainless steel freezer. it is 72 in. long 32 in. deep and 80 in. tall. Would something like that work very good for a smoker? There is plastic shelves in the doors that can be easily removed. The compressor went out on it.

It will work great.
Here are a couple conversion threads.
http://www.smokingmeatforums.com/t/90747/commercial-fridge-conversion-to-gas-smoker
http://www.smokingmeatforums.com/t/106359/ss-commercial-refrigerator-build

Kc_Kracker · « **Reply #5 on:** January 21, 2013, 10:33:08 PM »

i agree itll work great just ditch the plastic if your gonna get over 130 degrees

stainless rocks

Kc_Kracker · « **Reply #6 on:** January 21, 2013, 10:33:41 PM »

show us some pics of this bad boy!

huntergreg · « **Reply #7 on:** January 21, 2013, 10:45:21 PM »

Quote from: Kc_Kracker on January 21, 2013, 10:33:41 PM

show us some pics of this bad boy!

Ill take one tomorrow. I have it covered with a tarp outside right now. Its big!

huntergreg · « **Reply #8 on:** January 21, 2013, 10:51:52 PM »

i put a pic in a second have to download it I went out side and got a pic for ya

huntergreg · « **Reply #9 on:** January 21, 2013, 10:57:40 PM »

Kc_Kracker · « **Reply #10 on:** January 21, 2013, 10:58:30 PM »

damn son you got the goods ready for building!

huntergreg · « **Reply #11 on:** January 21, 2013, 11:06:24 PM »

are the rack ok to smoke on after cleaning? I herd on the net that fridge racks have something on them that can kill you when they are heated up?

If there is foam behind the plastic would that have to all be taken out or would sheeting over it with stainless sheet metal be ok?

Hawgdawg · « **Reply #12 on:** January 21, 2013, 11:15:34 PM »

That won't make a good smoker at all. I'll give you 50 bucks for it. Basicly scrap price.

huntergreg · « **Reply #13 on:** January 21, 2013, 11:29:13 PM »

Quote from: Hawgdawg on January 21, 2013, 11:15:34 PM

That won't make a good smoker at all. I'll give you 50 bucks for it. Basicly scrap price.

Well see if it works out. if not I can get a lot more than $50 for it by scraping it.

Kc_Kracker · « **Reply #14 on:** January 21, 2013, 11:33:32 PM »

hawg weve seen that scrap pile you got, whats that now 2 pics of it a day?

greg dont listen to hawg he just wants your stainless run away

Hawgdawg · « **Reply #15 on:** January 21, 2013, 11:53:45 PM »

OK, Greg I will go 75 and thats it! If you decline this generous offer. PM me for details on how to make a real smoker. Be prepared for about another 500.00 and more if you are not handy with metal, wielding etc.
Kracker you got a pic of my scrap big chief next to your little chief..lol

Kc_Kracker · « **Reply #16 on:** January 22, 2013, 08:41:51 AM »

ya greg you better pm him on how to make a smoker, its a secret,

huntergreg · « **Reply #17 on:** January 22, 2013, 10:18:47 AM »

Quote from: Kc_Kracker on January 22, 2013, 08:41:51 AM

ya greg you better pm him on how to make a smoker, its a secret,

Kc_Kracker · « **Reply #18 on:** January 25, 2013, 12:46:31 PM »

http://seattle.craigslist.org/see/bfd/3571018539.html

ok here is the big bad dog, man somebody buy this and do something with it

h20hunter · « **Reply #19 on:** January 25, 2013, 12:48:34 PM »

Shoot......seems like that would make a pefect meat locker for the garage!

Kc_Kracker · « **Reply #20 on:** January 25, 2013, 04:57:43 PM »

thats what its intended for

Hawgdawg · « **Reply #21 on:** January 25, 2013, 08:37:24 PM »

Quote from: Kc_Kracker on January 25, 2013, 12:46:31 PM

http://seattle.craigslist.org/see/bfd/3571018539.html

ok here is the big bad dog, man somebody buy this and do something with it

Pm Huntergreg....I'm sure his build is fine and ready for an upgrade. that thing scares me! You big bad dogs run for it. I will stick to my little cheif and my habatchi! I don't mess with second hand smoke...

huntergreg · « **Reply #22 on:** January 25, 2013, 08:45:50 PM »

Quote from: Hawgdawg on January 25, 2013, 08:37:24 PM

Quote from: Kc_Kracker on January 25, 2013, 12:46:31 PM
http://seattle.craigslist.org/see/bfd/3571018539.html

ok here is the big bad dog, man somebody buy this and do something with it

Pm Huntergreg....I'm sure his build is fine and ready for an upgrade. that thing scares me! You big bad dogs run for it. I will stick to my little cheif and my habatchi! I don't mess with second hand smoke...

Mine just sits under a tarp. might never become a smoker at all. I will figure something out to do with it one day.

Kc_Kracker · « **Reply #23 on:** January 25, 2013, 09:26:03 PM »

greg say it isnt so

no smoker should go unloved!

huntergreg · « **Reply #24 on:** January 25, 2013, 09:54:11 PM »

Quote from: Kc_Kracker on January 25, 2013, 09:26:03 PM

greg say it isnt so no smoker should go unloved!

Another thing I could do is BEST OFFER BY FRIDAY OF NEXT WEEK GETS THE 3 DOOR FREEZER?

Post offers-- I head over to the Seattle area often. so I think I may be able to deliver it.

might have to put this in the classifieds section so we don't get into trouble.

Kc_Kracker · « **Reply #25 on:** January 25, 2013, 10:04:32 PM »

o no, build that sucker!

News:

Advertisement

Author Topic: Need a killer smoker donar? (Read 7842 times)

Advertisement

Quick Links

Recent Topics