collapse

Advertisement


Author Topic: Help with an insert problem  (Read 2921 times)

Offline biggfish

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Mar 2013
  • Posts: 754
  • Location: Spanaway
  • Groups: NRA
Help with an insert problem
« on: July 29, 2013, 06:21:16 PM »
I got broadheads today was tightening one on to an arrow and the insert started to spin.  It was tight enough that I can unscrew the head but had enough play to pull out 1/4".  I glued back down with crazy glue because it was all I had on hand and it gardens before I got the insert all the way back in. Is that a problem or not?
Now then, get your equipment—your quiver and bow—and go out to the open country to hunt some wild game for me.  Gen. 27:3

Online Old Dog

  • Political & Covid-19 Topics
  • Trade Count: (+2)
  • Sourdough
  • *****
  • Join Date: Jan 2009
  • Posts: 1190
  • Location: Pierce County
  • Groups: Old Dog
Re: Help with an insert problem
« Reply #1 on: July 29, 2013, 11:24:49 PM »
Bring it into Sportsman's Warehouse in Federal Way.  I can usually get them out.  No charge, but no guarantee either.   :chuckle:
Hunt hard and shoot straight!

Offline demontang

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 3412
  • Location: Selah
Re: Help with an insert problem
« Reply #2 on: July 30, 2013, 05:43:04 AM »
What kind of glue was used to put them in? Id have them pulled and re glued if they are doing that. Nothing like losing a insert in your target and finding it with another arrow :chuckle:

Online JBar

  • The Family "Guide"
  • Non-Hunting Topics
  • Trade Count: (+17)
  • Sourdough
  • *****
  • Join Date: Sep 2008
  • Posts: 2129
  • Location: Puyallup
Re: Help with an insert problem
« Reply #3 on: July 30, 2013, 06:00:21 AM »
Take the arrow back to where you got it they will help you out! 
Shut up and Hunt!

Offline Jellymon

  • Political & Covid-19 Topics
  • Trade Count: (+6)
  • Sourdough
  • *****
  • Join Date: Jun 2009
  • Posts: 1510
  • Location: Spanaway
Re: Help with an insert problem
« Reply #4 on: July 30, 2013, 06:11:53 AM »
He probably got his arrows from cabelas and they used Elmer's glue on the inserts. :chuckle:

Offline biggfish

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Mar 2013
  • Posts: 754
  • Location: Spanaway
  • Groups: NRA
Re: Help with an insert problem
« Reply #5 on: July 30, 2013, 12:36:28 PM »
i got them from Dick's. I only have an issue with one arrow it seems it didn't get glued in right since it just spun on me. but I glued it back in with krazy glue and it hardened before I could get it seated all the way so there is a small gap between the shaft and insert lip.
Now then, get your equipment—your quiver and bow—and go out to the open country to hunt some wild game for me.  Gen. 27:3

Offline stickflngr

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2012
  • Posts: 183
  • Location: Pasco
Re: Help with an insert problem
« Reply #6 on: July 30, 2013, 01:08:51 PM »
Get a drill bit that just fits into the shaft on the nock end. Now hold the arrow up and swing it towards the floor so the drill bit slides into the tip as hard as you can. This will take quite a few times but the drill bit  will knock the insert out but point it in a safe direction as that insert and drill bit WILL come out at a high rate of speed :yike: Good luck
Hoyt carbon element G3
Elite GT500


"Democracy is two wolves and a lamb discussing what to have for lunch"
" Liberty is a well armed lamb contesting the vote."

Offline biggfish

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Mar 2013
  • Posts: 754
  • Location: Spanaway
  • Groups: NRA
Re: Help with an insert problem
« Reply #7 on: July 30, 2013, 03:21:49 PM »
getting it out was not an issue i was trying to figure out if a small gap was going to be a problem I still don't know but not important I just removed the insert came out with a bit of force and a field point in a vise with a little heat not enough to even get the shaft warm.  I'm just going to get some glue that's not instant set any suggestions would be appreciated.
Now then, get your equipment—your quiver and bow—and go out to the open country to hunt some wild game for me.  Gen. 27:3

Offline demontang

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 3412
  • Location: Selah
Re: Help with an insert problem
« Reply #8 on: July 30, 2013, 03:55:23 PM »
Epoxy is slow hotmelt is nice cause you can remove or turn the inserts with heat. The g5 glue isnt that fast.

Online JBar

  • The Family "Guide"
  • Non-Hunting Topics
  • Trade Count: (+17)
  • Sourdough
  • *****
  • Join Date: Sep 2008
  • Posts: 2129
  • Location: Puyallup
Re: Help with an insert problem
« Reply #9 on: July 30, 2013, 06:45:49 PM »
Bohning blue hot melt, been working great for me!
Shut up and Hunt!

Offline Smossy

  • Illiterate Woodsman
  • Past Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jan 2013
  • Posts: 6668
  • Location: Spanaway, Wa
  • Slow down and enjoy the moment.
Re: Help with an insert problem
« Reply #10 on: July 30, 2013, 06:59:23 PM »
I made a pretty handy contraption for removing old arrow inserts.
Im gonna make a thread and post it to this thread just for people who are curious.
One touch of nature makes the whole world kin.

Offline Smossy

  • Illiterate Woodsman
  • Past Sponsor
  • Trade Count: (+1)
  • Old Salt
  • *****
  • Join Date: Jan 2013
  • Posts: 6668
  • Location: Spanaway, Wa
  • Slow down and enjoy the moment.
Re: Help with an insert problem
« Reply #11 on: July 30, 2013, 07:07:49 PM »
One touch of nature makes the whole world kin.

Offline scottcrb

  • NRA, RMEF, Wa marketing director Montucky Cold Snack, MDF, BHA,
  • Business Sponsor
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: May 2010
  • Posts: 1104
  • Location: Cle elum
    • Montucky Cold Snacks
  • Groups: nra, RMEF,MDF
Re: Help with an insert problem
« Reply #12 on: July 30, 2013, 07:28:03 PM »
ive lost 6 inserts in the last month alone. all in targets. not sure whats up . the nock point used hot melt glue but i have gold tips and they dont sell gold tips or gold tip inserts so think that might be the issue. went to outdoor emporium today to get three more inserts put in using gold tip inserts so well see now.

Offline biggfish

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Mar 2013
  • Posts: 754
  • Location: Spanaway
  • Groups: NRA
Re: Help with an insert problem
« Reply #13 on: August 01, 2013, 12:22:40 AM »
I spent the day shooting yesterday and had 4 more inserts fail.  Took all my arrows back to Dick's to be repaired and they cut me a new set the guy said it looked like they were just pressed in.  I was quite impressed by the way they made it right.
Now then, get your equipment—your quiver and bow—and go out to the open country to hunt some wild game for me.  Gen. 27:3

Offline demontang

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 3412
  • Location: Selah
Re: Help with an insert problem
« Reply #14 on: August 01, 2013, 05:40:11 AM »
Good to hear they took care of you :tup:

 


* Advertisement

* Recent Topics

Cowiche Quality Buck by millerwheeler
[Today at 12:02:11 PM]


2025 Draw Results by addicted1
[Today at 11:59:56 AM]


2025 OILS! by vandeman17
[Today at 11:08:12 AM]


Antlerless Moose more than once? by Whitpirate
[Today at 10:46:58 AM]


Share your out of state experience by CasterlyRock
[Today at 09:45:12 AM]


Vancouver Outdoor Expo. WHOA WHOA WHAT? by nwmein199
[Today at 09:39:47 AM]


SE raffle tags holder by trophyhunt
[Today at 09:34:07 AM]


Son drawn - Silver Dollar Youth Any Elk - Help? by TC_outdoorsman
[Today at 09:29:53 AM]


Anterless 1334 muzzle loader by avidnwoutdoorsman
[Today at 09:28:10 AM]


Maple creek outfitters by nwhunter
[Today at 08:17:17 AM]


Bow mount trolling motors by GWP
[Today at 07:32:25 AM]


Nevada guide draw Mule Deer by High Climber
[Today at 07:18:34 AM]


11th Annual 'Pull For Scouting' Clay Crushing Classic by high_hunter
[Today at 12:27:18 AM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by high_hunter
[Today at 12:21:33 AM]


Ritzville Rifle Buck - GMU 284 by high_hunter
[Yesterday at 11:49:16 PM]


Nooksack Muzzleloader Bull Tag by high_hunter
[Yesterday at 10:42:24 PM]


My wife drew quality deer DESERT rifle 10/18-10/26!!!!! by high_hunter
[Yesterday at 10:17:15 PM]


Palouse buck deer by blumtnelkndeer
[Yesterday at 10:14:00 PM]


Drew Quality by Jimmer
[Yesterday at 09:34:00 PM]


Quality Swakane by Rainier10
[Yesterday at 09:09:17 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal