collapse

Advertisement


Author Topic: Mount placement?  (Read 2123 times)

Offline LITTLEBUCK

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2008
  • Posts: 213
Mount placement?
« on: August 17, 2013, 01:10:55 PM »
To you taxidermist and or knowledgeable mount owners. I have two deer mounts I need to place on my wall. I would like to place them one on each side of my free standing corner wood stove but am questioning myself thinking the extra heat would not be good for the longevity of the mounts. I don't burn all the time but during the winter nothing better then a nice warm fire. Am I correct in my thinking or do you think this would be an ok location. Thanks

Offline FSTaxidermy

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2010
  • Posts: 935
  • Location: Toledo, Washington
  • Go Seahawks!
    • https://www.facebook.com/pages/fireside-Taxidermy/144574058938866
    • firesidetaxidermy
Re: Mount placement?
« Reply #1 on: August 17, 2013, 02:19:22 PM »
Littlebuck, how far away from the exhaust pipe were you thinking? If positioned to close to direct heat it will shrink hide and epoxy work would possibly crack and lift over time.
FIRESIDE TAXIDERMY
Located in Toledo, WA.  Appox 15 miles south of Chehalis-Centralia
For current photos and general pricing check out our Facebook page: Fireside Taxidermy or give us a call: 360-623-0320
www.firesidetaxidermy.com

Offline Rooster1981

  • R.K.
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Feb 2011
  • Posts: 683
  • Location: Mason County
    • Roosters Kennel
Re: Mount placement?
« Reply #2 on: August 17, 2013, 02:27:45 PM »

This is a good question,  I have a buck mounted over a fire place. The mount was done ten years ago. It is showing heavy signs of deterioration. The shoulder mount has been over the fireplace for five years.  I don't get a lot of heat but I do get excess smoke. Around the mouth and eye's you can see separation. This mount was done by a cheap taxi and not someone i would recamend. So I'm not sure if I just have a poor product or am I getting smoke damage?  I decided to leave it over the mantle because at this point I am going to have to get it remounted anyways.  Can occasional smoke be that damaging?
Hunting hounds since 1993

Offline LITTLEBUCK

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2008
  • Posts: 213
Re: Mount placement?
« Reply #3 on: August 17, 2013, 03:44:32 PM »
FS, both mounts would sit about 3 feet from the stove pipe. I would have no real smoke problem being it's a free standing stove other than the occasional puff. One mount I'm not to worried about, its from 1983, not done real well but still looks ok, the other is a pretty nice mule deer that Charlie did for me last year, want to keep his art work it top shape. Thanks

Offline Michelle_Nelson

  • Trade Count: (-1)
  • Old Salt
  • ******
  • Join Date: Apr 2007
  • Posts: 7974
  • Location: Rochester, Washington
  • Bring on the Bears!
Re: Mount placement?
« Reply #4 on: September 10, 2013, 02:30:16 AM »
Start a fire and let everything get good and hot.  Then take a temp readibg where you want to hang the heads.  If its much over 80-85 degrees I would look at a different place to hang it.  To much heat over a long period of time ( hanging over a fire place, next to a window allowing direct sunlight, etc) can be damaging to any mount. 

It can cause cracking among other hair problems.

Offline Rooster1981

  • R.K.
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Feb 2011
  • Posts: 683
  • Location: Mason County
    • Roosters Kennel
Re: Mount placement?
« Reply #5 on: September 10, 2013, 06:45:21 AM »
Start a fire and let everything get good and hot.  Then take a temp readibg where you want to hang the heads.  If its much over 80-85 degrees I would look at a different place to hang it.  To much heat over a long period of time ( hanging over a fire place, next to a window allowing direct sunlight, etc) can be damaging to any mount. 

It can cause cracking among other hair problems.

Thanks  :tup:
Hunting hounds since 1993

Offline LITTLEBUCK

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Feb 2008
  • Posts: 213
Re: Mount placement?
« Reply #6 on: September 10, 2013, 10:35:10 AM »
Thanks Michelle. I thought of that but never really knew what the magical numbers would be. I will do just as you suggested.

 


* Advertisement

* Recent Topics

Idaho General Season Going to Draw for Nonresidents by kentrek
[Yesterday at 10:40:30 PM]


Best/Preferred Scouting App by addicted1
[Yesterday at 08:53:32 PM]


Heard of the blacktail coach? by BigredRusch
[Yesterday at 08:46:57 PM]


2025 Coyotes by Skillet
[Yesterday at 07:09:22 PM]


Fun little Winchester 1890 project by Skillet
[Yesterday at 06:56:17 PM]


Vail/general archery advice by JeffRaines
[Yesterday at 10:51:27 AM]


Which Tuner? 99 Powerstroke by Cylvertip
[Yesterday at 10:39:13 AM]


Anybody breeding meat rabbit? by HighlandLofts
[Yesterday at 07:35:02 AM]


Resetting dash warning lights by jackelope
[Yesterday at 07:18:27 AM]


Fawn dropped by Rainier10
[Yesterday at 07:11:37 AM]


Please Report Problems & Bugs Here by Rainier10
[Yesterday at 07:10:37 AM]


Back up camera by andersonjk4
[Yesterday at 07:08:42 AM]


WDFW's new ship by Tbar
[May 31, 2025, 07:07:35 AM]


Cougar Problems Toroda Creek Road Near Bodie by Elkaholic daWg
[May 31, 2025, 06:10:59 AM]


Wolf documentary PBS by Roslyn Rambler
[May 30, 2025, 07:56:34 PM]


New York deer by MADMAX
[May 30, 2025, 07:38:44 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal