Foc??

[blacktailcody]

What should I use as weight to put my foc where it should be?
Cody

[Smossy]

What should I use as weight to put my foc where it should be?
Cody

Depends if u need weight in the front or back

[Jonathan_S]

  and how much of a difference you need to make 

If you need to increase it, you can buy lighter nocks or get heavier weight tips.

[blacktailcody]

I already have tips. Need to add weight to the front. Is there something I can put behind the insert? Need to add 40-50 grains.

[Jonathan_S]

50 grains?

You're sure about that?  I really don't know, I did all my calculations before purchasing components so I can't really give much advice there but PM RadSav or somebody who's dealt with it before.

Can you not buy heavier broadheads?

[blacktailcody]

I am trying to make the broad heads I have work. I am shooting trad so I want a high Foc. Could I glue nails in behind my insert?

[Smossy]

I am trying to make the broad heads I have work. I am shooting trad so I want a high Foc. Could I glue nails in behind my insert?

Dont do that. If you really are interested in adding weight to your tips without upgrading broadhead weight u can get a heavier insert. Some of the brass inserts weight 80-100 grains compaired to the 8-12 grain standards.

[blacktailcody]

Ok I will check that out. Thanks.

[Smossy]

There is also weighted spacers that go on before your heads. I believe they come in 10, 20, 50, 100 grain weights to. U can stack if your threading will allow for it.

[blacktailcody]

Just bought 24 Inserts. 30 bucks. Ouch!!! But I need them.

[724wd]

look at mr. know-it-all Smossy!    

good advice, though!   

[Smossy]

look at mr. know-it-all Smossy!    

good advice, though!   

I do way to much reading.