collapse

Advertisement


Author Topic: no tulammo?  (Read 2758 times)

Offline splitshot

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Sep 2010
  • Posts: 2054
no tulammo?
« on: December 14, 2013, 09:50:43 PM »
  have a
 Taurus 738 that wont accept tulammo 380 in the chamber.  anyone else have that trouble?    cleaned it , etc.  it shoots other ammo.    mike w

Offline FC

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2010
  • Posts: 3954
  • Location: Wa
Re: no tulammo?
« Reply #1 on: December 15, 2013, 09:39:26 AM »
Sounds kinda weird, how does it not fit? Worst case scenario I have a 380 too and will take the ammo off of your hands  :chuckle:
The reason there are so many Ruger upgrades is because they're necessary.

Offline JackOfAllTrades

  • Rasbo said I Ain't Right.
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2009
  • Posts: 6509
  • Location: Lynden, WA.
  • Μολὼν λαβέ
Re: no tulammo?
« Reply #2 on: December 15, 2013, 02:14:05 PM »
There are lot of reports of Tulammo not chambering in many different chambers/chartridges/calibers.  Russian company/products now marketed in the states. You get what you pay for. It is cheap stuff. I'd actually trust that the Taurus chamber is built to Sammi spec. From what I've read, I wouldn't trust that Tulammo is a quality product built to sami specifications.
 
-Steve
The NRA says I'm a Master!
Colt's, Ruger's, Dan Wesson, & Kimber are my friends!
Proud to be a U.S. Navy Veteran.

If you never follow your dreams, you'll never go anywhere.

Critical thinking keeps people from freaking the hell out every time some half baked blogger forgets his meds. Unlike some of you, I do not have TawkethOutOfAnus© syndrome.

Offline Heredoggydoggy

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2010
  • Posts: 5041
  • Location: Wenatchee
  • Team I'M TOO OLD FOR THIS $H!T !
Re: no tulammo?
« Reply #3 on: December 15, 2013, 02:30:43 PM »
Most of that Russian ammo is steel cased, and shoots well in Russian and some European guns, but I wouldn't use it as a personal choice.  The older steel cased ammo used a coating that melted and stuck to the walls of the chamber, and if the gun has a tight chamber--well, you know...
I was given a box of steel cased 9mm Parabellum ammo, and I shot it in my HK-94 that has a fluted chamber, but I would not have used it otherwise.

(FC will probably flame me because he loves the stuff!)   :chuckle:
If it was easy, everybody would be doing it.

When Bernie Madoff did it, it's called a "Ponzi Scheme"
When Government does it, it's called "Social Security"

Offline FC

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2010
  • Posts: 3954
  • Location: Wa
Re: no tulammo?
« Reply #4 on: December 15, 2013, 11:03:54 PM »

(FC will probably flame me because he loves the stuff!)   :chuckle:

It's some awfully cheap practice ammo for sure!

Someone posted this article on here recently that was very informative on using steel case vs brass case stuff. It also pretty well debunked the old coating melting in the chamber myth.

http://www.luckygunner.com/labs/brass-vs-steel-cased-ammo/
The reason there are so many Ruger upgrades is because they're necessary.

Offline Heredoggydoggy

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2010
  • Posts: 5041
  • Location: Wenatchee
  • Team I'M TOO OLD FOR THIS $H!T !
Re: no tulammo?
« Reply #5 on: December 16, 2013, 09:54:13 AM »

(FC will probably flame me because he loves the stuff!)   :chuckle:

It's some awfully cheap practice ammo for sure!

Someone posted this article on here recently that was very informative on using steel case vs brass case stuff. It also pretty well debunked the old coating melting in the chamber myth.

Didn't see the article, but the steel ammo makers first used a lacquer coating on the cases, and it did melt.  Now they use a polymer coating, and it's much better.  But after seeing an AR with a stuck steel case in the chamber, no matter what it's coated with, I personally will never shoot steel case ammo.  I guess we will always disagree on that point!  :chuckle:
If it was easy, everybody would be doing it.

When Bernie Madoff did it, it's called a "Ponzi Scheme"
When Government does it, it's called "Social Security"

Offline FC

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2010
  • Posts: 3954
  • Location: Wa
Re: no tulammo?
« Reply #6 on: December 16, 2013, 08:34:24 PM »
Check that article, they were getting rifles just cool enough to stop heat firing and chambering a lacquer coated steel case round and letting it sit till the rifle cooled. They were never able to reproduce the situation you describe. I have seen cases stuck before but they were brass that had ripped the head off via extractor when the butt was slammed on the ground.  :twocents:

FYI some manufacturers still use lacquer coating.
The reason there are so many Ruger upgrades is because they're necessary.

Offline Cap.Silver

  • My love is the outdoors
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Sep 2010
  • Posts: 1251
  • Location: US/DE/CZ
  • If not fishing then hunting
Re: no tulammo?
« Reply #7 on: December 16, 2013, 08:40:33 PM »
Witnessed a guy not being able to close bolt in his Tikka after inserting Hornady 308 ammo (box was $45) and had to borrow some ammo from his friend .....I looked at it - the length was the same ,but the butt on brass was lot thicker and different profile .... as far as Tulammo - yes I think it could cause problems in tight guns......
Everyone thinks that I'm freak ,I don't look different do I ?

Offline FC

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: May 2010
  • Posts: 3954
  • Location: Wa
Re: no tulammo?
« Reply #8 on: December 16, 2013, 08:44:01 PM »
Witnessed a guy not being able to close bolt in his Tikka after inserting Hornady 308 ammo

I had a factory federal 150gr (308) that I couldn't close the bolt on in my Savage 308.
The reason there are so many Ruger upgrades is because they're necessary.

Offline Heredoggydoggy

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Nov 2010
  • Posts: 5041
  • Location: Wenatchee
  • Team I'M TOO OLD FOR THIS $H!T !
Re: no tulammo?
« Reply #9 on: December 16, 2013, 09:11:10 PM »
Good article, FC, but like it was said at the end of the article, most people (me included) will never shoot 10,000 rounds of ammo in their lives, so it's still a personal choice.  I never buy ammo, and I have so much brass and reloaded ammo, I will never have to.  Shooters who don't reload are a different story... so I guess we will never agree on the brass vs. steel issue.  :chuckle:
If it was easy, everybody would be doing it.

When Bernie Madoff did it, it's called a "Ponzi Scheme"
When Government does it, it's called "Social Security"

 


* Advertisement

* Recent Topics

Boat registration by metlhead
[Today at 12:45:47 PM]


Cowiche Cow Archery Tag - Group Hunt by VickGar
[Today at 12:45:06 PM]


Ritzville Rifle Buck - GMU 284 by Sundance
[Today at 12:37:11 PM]


Eastern WA-WT hunting from tree stands?? by finnman
[Today at 12:28:44 PM]


Vashon Island deer tag by swanderek
[Today at 12:27:06 PM]


Rehome for GWP by metlhead
[Today at 12:25:21 PM]


Oregon results posted. by finnman
[Today at 12:23:59 PM]


Idaho 2025 Controlled Hunts by Shooter4
[Today at 12:13:32 PM]


Stillaguamish 448 QD rifle tag by Hi-Liter
[Today at 12:06:37 PM]


Palouse/Mica (GMU 127) Access for Trades Work by andersonjk4
[Today at 12:00:59 PM]


Muzzy Mission Quality!!! by finnman
[Today at 11:54:18 AM]


Entiat Quality tag by psr81
[Today at 11:31:34 AM]


Colockum Archery Bull Tag by throttlejocky20
[Today at 11:27:12 AM]


For the Vortex guys by pianoman9701
[Today at 11:23:45 AM]


Teanaway bull elk by throttlejocky20
[Today at 11:23:44 AM]


Palouse buck deer by MMCCAULEY
[Today at 11:09:55 AM]


2025 OILS! by HillHound
[Today at 10:25:46 AM]


Awesome customer service by Stein
[Today at 10:22:51 AM]


Youth Cow Tag by DUCKDUDE
[Today at 09:10:29 AM]


Pogue Quality by DUCKDUDE
[Today at 09:03:01 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal