CZ Bobwhite 20GA?

[Bill W]

Save some more money and buy a good used Baretta silver hawk or a AYA boxlock. I have a Bill Hanus 20ga AYA  and its the best gun I ever owned.
27in barrels, SG, Dtt and a splinter forend. Fixed chokes that mike out to be light imp cyl and light mod, deadly on quail and chukar over a pointing dog.

Bill W, do you ever shoot that Browning o/u I sold you?  Can't tell you enough how much more I like the AYA than that Browning. Find some quail around your place and I'll show you what a real dog can do. I'll even let you shoot first. 

Bob.

Bill Hanus died so hold on to your shotgun.

[wildweeds]

I've got a CZ woodcock,I waited to buy one until I'd seen how reliable they were,which was kind of a stupid mistake that cost me more money as the prices went up.Functions fine,shoots well,I've poured thousands of rounds down the tubes at skeet and sporting clays,I've hunted wetside chickens with it.It's a .410.The guy I shoot with has the SXS version with 2 triggers,being older and retired he shoots 66% more than I do per week,he poured 16 boxes a week through his for years.Finally broke earlier this fall,firing pin.He found a smith to work on it and got that repaired and then the forearm started to have issues,apparantly the silver solder that holds the lug on is letting go.He said he's got over 20K rounds thru it. I like mine and wouldn't hesitate at getting another one.I've got 2 brownings,1 superposed,1 citori,a Rizzini combo set 20/28,and a Fausti.For a straight up hunting gun and the price you have to pay I consider the CZ to be a value buy,if it gets dinged,scratched beat up......... it really doesn't matter.Can't say the same about some of the others I have,almost too pretty to drag around through the brush/rocks/fences.

[singleshot12]

All CZ's are good.. some might have quirks but still worth every penny

[merkelman]

I've got a CZ woodcock,I waited to buy one until I'd seen how reliable they were,which was kind of a stupid mistake that cost me more money as the prices went up.Functions fine,shoots well,I've poured thousands of rounds down the tubes at skeet and sporting clays,I've hunted wetside chickens with it.It's a .410.The guy I shoot with has the SXS version with 2 triggers,being older and retired he shoots 66% more than I do per week,he poured 16 boxes a week through his for years.Finally broke earlier this fall,firing pin.He found a smith to work on it and got that repaired and then the forearm started to have issues,apparantly the silver solder that holds the lug on is letting go.He said he's got over 20K rounds thru it. I like mine and wouldn't hesitate at getting another one.I've got 2 brownings,1 superposed,1 citori,a Rizzini combo set 20/28,and a Fausti.For a straight up hunting gun and the price you have to pay I consider the CZ to be a value buy,if it gets dinged,scratched beat up......... it really doesn't matter.Can't say the same about some of the others I have,almost too pretty to drag around through the brush/rocks/fences.

I agree you wont see me dragging my Merkels out amongst the rocks

[GrampasGuns]

Gentlemen,

CZ should buy you guys a drink im sold. Gettin me a 20 here soon! Cant wait to chase some birds with it.

[AWS]

I'm sorry but I don't believe in safe queens and even my best guns go hunting, brush and barbwire give them character.  I buy a gun for the way they handle and they don't handle at all in the safe.  None of my guns are an investment and my wife will be happy with whatever she gets out of them when I pass.  Most of my guns don't shoot steel so the CZ for most of my waterfowling on the salt.  But I still load soft non-toxics to hunt ducks on occasion just because it is so much fun to hunt with old and good guns.

Good time on the coast.



Busting wild birds in the uplands

[Bill W]

I should have mentioned I have an AyA Matador in 12 gauge choked Modified and Full, with a single selective trigger that needs a new home.   I bought it 10 or so years ago and it wasn't what I wanted.

[Fishnfowler]

Point well taken AWS. That steel thing for hunting chukars is a bunch of crap. I'll use lead until I can no longer hunt. No way can you find a good used AyA or Beretta for $750 -900.
I know Bill W and he seems to like his CZ's, probably worth a try for $750

I beg to differ, there are deals out there if you look for them.  I got this AYA model 30 for $300:





This Uggie cost me $275:





I also think the Bobwhite is an excellent gun and I bet one can be picked up for $600.  I had a Ringneck and sold it because I didn't like the pistol grip and single trigger.

[jetjockey]

IMO there are way too many nice used SXS's out there in the $1000-$1500 range that are extremely well built to settle for a CZ.  Not to bash the CZ's, but they are a bottom of the barrel SxS built for a price point.  SXS's are not cheap to build, and that's why they are expensive.  Add that to the balance and swing of a nice SXS, and there is a reason they aren't cheap. 

Three weeks ago we were pheasant hunting on a farm in PA.  All of us were shooting doubles, but a few of the guys were shooting really really nice doubles. One was an English best 12 GA built by Jeffery.  It was a gun worth about $20K used, and was absolutely beautiful.  I can't tell you how well that gun swung and how well balanced it was.  It was a 12GA that weighed about 6 1/2lbs and handled better than almost every 20GA I've ever shouldered.  That gun made me realize what an extremely well made gun is all about.  It also made me jealous that I'll never be able to afford one, even in my wildest dreams.  If it were me, I'd skip the CZ and save a few more dollars and buy a nice used SxS.  In the long run, if you ever sell it, you will come out ahead.  Cheap used SXS's have almost zero demand in the used market.

[Bill W]

IMO there are way too many nice used SXS's out there in the $1000-$1500 range that are extremely well built to settle for a CZ.  Not to bash the CZ's, but they are a bottom of the barrel SxS built for a price point.  SXS's are not cheap to build, and that's why they are expensive.  Add that to the balance and swing of a nice SXS, and there is a reason they aren't cheap. 

Three weeks ago we were pheasant hunting on a farm in PA.  All of us were shooting doubles, but a few of the guys were shooting really really nice doubles. One was an English best 12 GA built by Jeffery.  It was a gun worth about $20K used, and was absolutely beautiful.  I can't tell you how well that gun swung and how well balanced it was.  It was a 12GA that weighed about 6 1/2lbs and handled better than almost every 20GA I've ever shouldered.  That gun made me realize what an extremely well made gun is all about.  It also made me jealous that I'll never be able to afford one, even in my wildest dreams.  If it were me, I'd skip the CZ and save a few more dollars and buy a nice used SxS.  In the long run, if you ever sell it, you will come out ahead.  Cheap used SXS's have almost zero demand in the used market.

This was the same stuff said about the AyA's in the 60's.   The main complaint I heard was the metal was too soft.

Not intended as an insult to the above poster but it took me 18 months before I bought my first Huglu as I couldn't see how anything that cheap could be of any quality.   My first was a DeHaan Huglu over and under and I was comparing it against Citori's and Beretta's.  The DeHaan was 2/3rds of the price of a Citori.  When I bought the CZ's in 2008 I checked them to see if they were the same quality as the DeHaan gun.  In both cases it's the same factory in Turkey for CZ and DeHaan.  In order to make an accurate assessment of the CZ's the rater should handle a CZ and compare it to a higher priced "US" model.  The only difference should be the price of labor as the Turkey factory uses US style NC machinery and US metal specifications in the manufacture of the  shotguns.  Turkish walnut has been bought for years.

[merkelman]

Our gun club was one of the first to import Huglu shotguns back in 2002-2003 into the USA. The single trigger mechanisms were very poor, in fact most needed some gun smithing to resolve. The POI on most of the original guns was spiratick. The wood to metal fit was very good and the Turkish walnut upgrades were worth more than the metal work. Over time they improved their design and improved the machining process. We paid 600 US for S X S, any gauge, with exhibition grade wood. Again the wood was worth four times what the metal was worth.
Huglu contracted CZ AS THE IMPORTER and things really started to change in quality. Dehaan only orders guns to his specs, engraving, etc.

Owning shotguns in the hundreds to tens of thousands, I shoot what is comfortable to me. As fishnfowler noted, you can get a lot for 3-800 bucks. Bottom line, shoot was is comfortable to you.

[wildweeds]

If a guy keeps an eye out some dandy SXS's can be had for under 1000 bucks, I've seen quite a few Fox sterlingworths over the last couple of years for sale over on the coverdog trial message board in the 750-1250 range,I think a Fox gun is a pretty good gun,aren't they a  Parker knockoff?My old boss has his dads SXS's and there are 2 L.C. Smiths,a Parker and a Fox.He considered them worthless until I informed him that they were not.

IMO there are way too many nice used SXS's out there in the $1000-$1500 range that are extremely well built to settle for a CZ.  Not to bash the CZ's, but they are a bottom of the barrel SxS built for a price point.  SXS's are not cheap to build, and that's why they are expensive.  Add that to the balance and swing of a nice SXS, and there is a reason they aren't cheap. 

Three weeks ago we were pheasant hunting on a farm in PA.  All of us were shooting doubles, but a few of the guys were shooting really really nice doubles. One was an English best 12 GA built by Jeffery.  It was a gun worth about $20K used, and was absolutely beautiful.  I can't tell you how well that gun swung and how well balanced it was.  It was a 12GA that weighed about 6 1/2lbs and handled better than almost every 20GA I've ever shouldered.  That gun made me realize what an extremely well made gun is all about.  It also made me jealous that I'll never be able to afford one, even in my wildest dreams.  If it were me, I'd skip the CZ and save a few more dollars and buy a nice used SxS.  In the long run, if you ever sell it, you will come out ahead.  Cheap used SXS's have almost zero demand in the used market.

[merkelman]

Those are great USA made guns. I bought a 1907 fox sterling worth for 200 bucks and did a complete restoration for 850.00, rust blue, wood and all. The metal was in great shape,  now worth every bit of 1500$$

[jetjockey]

Like the stories above, there's lots of nice used SXS's out there that can be had for very good bargains.  I'd been looking for a nice LC Smith 20GA for a couple years.  Between the combination of not finding what I wanted for what I could afford, and not really being able to afford much, I never could pull the trigger.  I finally stumbled across an extremely rare LC Smith Trap Grade.  I couldn't afford it, but I bought It anyways.  It's easily worth 2X's what I paid for it. 

Take your time and learn as much as you can about doubles.  Not only will you have fun learning, you will end up with a heck of a gun that anyone would be proud of.