pistol laser?

[splitshot]

  have a pistol with a laser.  the laser sights about 8 inches to the right at 15 feet.  how do I get the laser to be true?  the gun is a s&w bodyguard 380.  mike w

[mountainman]

You will have 2 very small windage and elevation adjustment screws
up front by the laser. With an unloaded gun, sight down the sights, properly lining them up with light bar (gaps) even on both sides and post level in rear notch. Adjust at the range you plan to shoot, putting the dot right on top of the front post. That will get you started!

[splitshot]

my mistake, the gun is an lc9 with a laser.  the other gun is right on . thanks.,  mike w

[mountainman]

Same proceedure!

[splitshot]

  what do you use to move the adjustment deal?  a screwdriver, needle, etc. one on each side, right.    it is damn small.   mike w

[mountainman]

Very very small allen wrench..one access on the side, the other on the bottom.

[splitshot]

thanks guys,  thought I would have to do the windage deal where you aim so far to the ......  and hit it.    thanks,   mike w

[splitshot]

did it.  the little tool on the box the gun cane was what I needed.  learned something.  thank you.   mike w