collapse

Advertisement


Author Topic: Green Mountain barrels 6.5 WSM.  (Read 2884 times)

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Green Mountain barrels 6.5 WSM.
« on: January 28, 2014, 08:54:41 PM »
I've been helping a new member here "Hot Rod Willy" with a wildcat build, his first wildcat. He first was entertaining the thought of a 6.5 SAUM. After a little more discussion he decided on a 6.5 WSM also known as the 6.5-270 WSM or the 6.5-300 WSM. The rifle was built on a Rem700 action with a Green Mountain F34 contour, 9 twist. Basically a 26" sporter weight. The thing to keep in mind here is this is a 92.00 barrel blank through Midway. He sent it of to a guy I suggested in Idaho. That chambered, threaded, crowned and fit the barrel. Along with lapping the lugs for a 175.00. He had the barreled action back in about two weeks.

Brass was necked down once fired stuff I gave him, loaded up some for the barrel brake in. He mounted a 3x9 scope just to get him by until his Leupold 8.5-25 arrived, which it did today. Off to the range, I was more than IMPRESSED! with the rifle, I already know the kid can shoot!

92.00 barrel
175.00 chamber and fit

I personally witnessed that rifle shoot group after group under half inch, his largest group going .514 @ 100 yards. I don't know about the rest of you but I have spent a bunch more for rifles to shooting like that consistanly  with everything from 100gr Partitions to 140gr Accubonds like I watched his rifle do and not too shabby trigger work I might add(Factory Remington trigger/stock) Here's his best group of the day in the mid .3's ( Pic bellow) He was pleased and I just sat and smiled because I knew when I got home I was ordering the same barrel in a varmint contour for a future project and the fact that sometimes things just come together without the average Rem700 custom barrel job and action work for 1000.00 plus. It should make a great Mulie/Elk rifle.


Off course he had some extras done. A muzzle brake and the barreled action bead blasted and matte blued. Fitted it to a Rem700 BDL stock along with Wyatt's bottom metal and detachable mags. I'll get pics when the scope is mounted and it's all back together. He's definitely been bitten, he's already looking towards his next build. :tup:

100 yards off a Harris bipod and rear bag.





 
« Last Edit: January 28, 2014, 09:13:43 PM by Biggerhammer »

Offline mossback91

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Frontiersman
  • *****
  • Join Date: Dec 2007
  • Posts: 3196
Re: Green Mountain barrels 6.5 WSM.
« Reply #1 on: January 28, 2014, 11:10:01 PM »
 :tup:

Offline Eli346

  • Eli
  • Past Sponsor
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Mar 2009
  • Posts: 2293
  • Location: Shelton
Re: Green Mountain barrels 6.5 WSM.
« Reply #2 on: January 29, 2014, 08:11:44 AM »
I'm envious!

Offline Taco280AI

  • Past Sponsor
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jan 2013
  • Posts: 2961
  • Location: FL350
Re: Green Mountain barrels 6.5 WSM.
« Reply #3 on: January 29, 2014, 07:56:48 PM »
Great low cost project  :tup:

Offline Hot Rod Willy

  • Trade Count: (0)
  • Pilgrim
  • *
  • Join Date: Jan 2014
  • Posts: 14
  • Location: Wenatchee Area
Re: Green Mountain barrels 6.5 WSM.
« Reply #4 on: January 30, 2014, 11:46:46 PM »
That was number 7-8-9 out of that barrel on a clean bore. Yehaw

Thanks again BiggerHammer for giving me a taste its only gonna cost me more than anything now.
 :tup:
"America is all about speed, Hot, Nasty, Bad-Ass speed. " Eleanor Roosevelt.

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: Green Mountain barrels 6.5 WSM.
« Reply #5 on: January 31, 2014, 12:50:17 AM »
Did you have Mel or Sam spin it on for you?

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: Green Mountain barrels 6.5 WSM.
« Reply #6 on: January 31, 2014, 03:53:42 PM »
Did you have Mel or Sam spin it on for you?

Mel....👍

 


* Advertisement

* Recent Topics

Crazy looking Deer by Ironhead
[Today at 05:40:46 AM]


Found after 2 days, meat worth anything? by Martinhunter
[Today at 02:36:28 AM]


4 days left by dreadi
[Yesterday at 11:05:45 PM]


Update repair complete Who knows Stihl messed up and cooked my 044 by Kingofthemountain83
[Yesterday at 08:54:03 PM]


Idaho on the verge of outlawing by idaho guy
[Yesterday at 08:22:23 PM]


Is it a conflict of interest by Tinmaniac
[Yesterday at 08:09:21 PM]


Smith-Reynolds American Legion Post #14 Fall Raffle by pianoman9701
[Yesterday at 07:38:19 PM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by pianoman9701
[Yesterday at 07:37:34 PM]


Selkirk bull moose. by Turner89
[Yesterday at 07:18:14 PM]


2025 elk success thread!! by BlackBellyHumpBack
[Yesterday at 06:34:30 PM]


Tease 'l' by boneaddict
[Yesterday at 06:20:29 PM]


Idaho's new Deer/Elk License System by JDArms1240
[Yesterday at 05:59:34 PM]


Diamond edge bow by salmonfinder
[Yesterday at 05:28:14 PM]


Trap Check Time by Trapper John
[Yesterday at 04:23:43 PM]


Fall turkey hunters save me your wings? by birddogdad
[Yesterday at 02:52:31 PM]


Mt. Spokane north bull moose tag drawn by mountainman
[Yesterday at 12:40:19 PM]


Dash cams by Blacklab
[Yesterday at 12:12:37 PM]


Owl by Ricochet
[Yesterday at 09:43:57 AM]


Quality tag by Pathfinder101
[Yesterday at 07:25:28 AM]


Late Achery Hunt 💥VIDEO💥 by blindluck
[Yesterday at 06:13:16 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal