collapse

Advertisement


Author Topic: DIY target for Magnus Bullhead (turkey)??  (Read 3923 times)

Offline irork

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Aug 2010
  • Posts: 26
DIY target for Magnus Bullhead (turkey)??
« on: March 26, 2014, 10:57:14 PM »
Hey guys. Recently picked up some Magnus Bullhead turkey broadheads to take some headshots on spring gobblers. They are a 3 and 3/4 inch diameter cutting surface consisting of three blades. I would like to build a quick target to dial in the bow with the turkey setup. I've heard of the blocks and whatnot breaking turkey broadheads and would like to keep mine in tact. Any suggestions for targets for practice?

Thanks guys

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: DIY target for Magnus Bullhead (turkey)??
« Reply #1 on: March 27, 2014, 12:35:11 AM »
Those blades are very soft and the little keepers that hold the blades out are somewhat fragile.  Dang hard to find a target that won't mess them up.  I've used just a couple pieces of cardboard in front of some sand and it's worked well.  Basically just trying to slow the arrow down before it hits the sand. A friend on the East coast swears by the big bulk bags of polyfill from a craft warehouse.  I've never tried that method, but he says if you leave it fluffy and in the big bulk plastic bag it works well.

Without question the best thing I've ever used is water!  Know anyone with a swimming pool or a small pond?  Get a couple bulk packs of ping pong balls and throw them out in the water.  Then shoot away!  I used the folks canoe and retrieved the arrows no problem.

Caution: Axis and FMJ's don't float very well.  And I don't expect the VAP will either.  Might want to take a few shots in the shallows first to see how well your arrows float.

Also, I did have a couple skip a few times.  Never more than five yards, but if shooting in a pool or back yard pond make sure there is plenty of safety space.

He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline scotsman

  • Political & Covid-19 Topics
  • Trade Count: (+11)
  • Longhunter
  • *****
  • Join Date: Dec 2010
  • Posts: 770
Re: DIY target for Magnus Bullhead (turkey)??
« Reply #2 on: March 27, 2014, 09:31:52 AM »
Take a plastic grocery bag and stuff it full of more plastic bags or similar. Hang that from a tree branch and you can fling away with no worries. Just don't miss!

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: DIY target for Magnus Bullhead (turkey)??
« Reply #3 on: March 27, 2014, 10:32:46 AM »
Those blades are very soft and the little keepers that hold the blades out are somewhat fragile.  Dang hard to find a target that won't mess them up.  I've used just a couple pieces of cardboard in front of some sand and it's worked well.  Basically just trying to slow the arrow down before it hits the sand.

I should have clarified that better.  We would place the cardboard eight to twelve feet in front of the sand.
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline irork

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Aug 2010
  • Posts: 26
Re: DIY target for Magnus Bullhead (turkey)??
« Reply #4 on: March 27, 2014, 11:03:39 AM »
Thank you fellas! I'll get to work! Spring turkey is fast approaching and im sure these broadheads fly way different, got some work to do!

Ian

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: DIY target for Magnus Bullhead (turkey)??
« Reply #5 on: March 27, 2014, 11:17:59 AM »
Thank you fellas! I'll get to work! Spring turkey is fast approaching and im sure these broadheads fly way different, got some work to do!

If you have problems getting them to fly here are a few things we did to get good results;

Add weight - Getting the FOC at or around 20% made a big difference.  We made custom brass inserts, but there is room to add some steel or brass washers.

Four Fletch - When using Blazer vanes we found the addition of a fourth fletch gave great returns.  We did have one in our turkey group who went six fletch, but we did not see much benefit to that.  Four 4" feathers was outstanding too!

Stiff Arrow - We had a few guys that still had some issues after switching the point weight and four fletch.  I switched them to the next stiffest spine weight and that did the trick.

Good luck :tup:
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline irork

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Aug 2010
  • Posts: 26
Re: DIY target for Magnus Bullhead (turkey)??
« Reply #6 on: March 30, 2014, 03:49:11 AM »
Thanks RadSav,
I did buy some shafts that were a bit stiffer than what i normally shoot. 4 Fletches is something ive read about before and probably should have gone that route, but im hoping i can at least make these huntable at short distances with the arrows I have. I doubt ill let one fly outside of say 25 yards.

thanks for the tips

Offline demontang

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Jul 2008
  • Posts: 3412
  • Location: Selah
Re: DIY target for Magnus Bullhead (turkey)??
« Reply #7 on: March 30, 2014, 12:21:00 PM »
I was using a pillow hanging, but I have shot a broadhead target with them too but they tear the target apart fast :chuckle:


 


* Advertisement

* Recent Topics

2025 Quality Chewuch Tag by Schmalzfam
[Today at 05:36:10 AM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Today at 03:52:00 AM]


Can’t fish for pinks area 8-2? by spin05
[Today at 12:42:57 AM]


Pocket Carry by spin05
[Today at 12:39:55 AM]


idaho hunt 1001 by MackDaddy509
[Yesterday at 08:37:03 PM]


Game trails to nowhere? by TitusFord
[Yesterday at 06:40:56 PM]


Drew Pogue Quality by actionshooter
[Yesterday at 06:22:02 PM]


Idaho general deer area 5. by 3nails
[Yesterday at 05:33:03 PM]


Mica Peak Moose Tag by Vandal44
[Yesterday at 01:04:39 PM]


49 degrees north late Moose tag by Vandal44
[Yesterday at 12:44:38 PM]


Antlerless Moose more than once? by lonedave
[Yesterday at 12:22:20 PM]


AKC Australian Shepherd Puppies by TeacherMan
[Yesterday at 11:27:04 AM]


June 26-27th WDFW Commission Meeting. Showing of sportsmen needed for Friday. by Firstgenhunter
[Yesterday at 09:33:23 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal