
if you can shoot a cartridge rifle you on your way . not knowing what the caliber or type of muzzle loader your going to be using
i cant give you to much help yet but here is a good starter
1. pour some powder in to the measure, then pour the measure depending of the recommended powder charge
2. take a patch and ball if that's what your going to use, then cover the end of the barrel with the patch then center the patch and ball on the barrel
3. push the patched ball down the barrel using the short ball starter then us the ramrod to seat the patch and ball on top of the powder. bring the ram rod up about 6 inches and let it bounce on the ball to be sure it is seated all the way .
4. next take a cap but it on the nipple aim at your target and have fun . next it will be up to you to make any adjustments to the sights and so forth but work up the powder load to a good solid crack from the barrel
no need to kill your shoulder ether just go slow and work at it read up on it and you should do just fine feel free to ask any questions you might have