collapse

Advertisement


Author Topic: CAN COOKER ISSUES!  (Read 1310 times)

Offline buglebuster

  • ELKOHOLIC
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2011
  • Posts: 3703
  • Location: yakima
CAN COOKER ISSUES!
« on: July 13, 2014, 06:00:01 PM »
As of lately everytime I use my can cooker, it overflows liquid out of the hole. So much that I have to pull it off and dump it off the lid or constantly sit there and burn my hands trying to sop it up wit a couple rags or sponge :dunno: It Never Used To Do This And I Am Doing Nothing different... Any ideas? It's really pissing me off!

Offline buglebuster

  • ELKOHOLIC
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2011
  • Posts: 3703
  • Location: yakima
Re: CAN COOKER ISSUES!
« Reply #1 on: July 13, 2014, 06:02:39 PM »

Offline Kc_Kracker

  • Sauceman
  • Washington For Wildlife
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Aug 2012
  • Posts: 4158
  • Location: olympia
Re: CAN COOKER ISSUES!
« Reply #2 on: July 13, 2014, 07:28:32 PM »
they are designed for low n slow cooking. if you cook too hot it will do that. think of it as a crock pot. simmer at max not boiling.

Offline buglebuster

  • ELKOHOLIC
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2011
  • Posts: 3703
  • Location: yakima
Re: CAN COOKER ISSUES!
« Reply #3 on: July 13, 2014, 07:35:06 PM »
That's exactly what I've been doing, cooking it on a real low temp, just enough to make it steam :dunno:

Offline Kc_Kracker

  • Sauceman
  • Washington For Wildlife
  • Trade Count: (+2)
  • Frontiersman
  • *****
  • Join Date: Aug 2012
  • Posts: 4158
  • Location: olympia
Re: CAN COOKER ISSUES!
« Reply #4 on: July 13, 2014, 08:02:38 PM »
i had the same issue , go even lower. i personally got so annoyed i took my lid and drilled a few holes to relieve pressure and stop the boiling over. they should have just made it a full on pressure pot, would have alleviated this issue

 


* Advertisement

* Recent Topics

2025 deer, let's see em! by NWBREW
[Today at 06:50:56 PM]


Drew Pogue Quality by scottfrick
[Today at 06:50:35 PM]


Question about hunting wilderness areas by Kingofthemountain83
[Today at 06:25:11 PM]


Eastern Washington Late Archery by jstone
[Today at 06:21:16 PM]


Wowzers by freezerfull
[Today at 05:27:31 PM]


Nooksack Muzzleloader Bull Tag by freezerfull
[Today at 05:22:49 PM]


New world record mule? by dvolmer
[Today at 04:51:59 PM]


Panhandle whitetail dates by 762Gunner
[Today at 03:32:57 PM]


Homemade saltwater fishing gear by Wetwoodshunter
[Today at 02:40:47 PM]


2025 OILS! by Mfowl
[Today at 02:04:19 PM]


Calling Bears by Boar
[Today at 01:15:55 PM]


Any MT deer updates? by Craig
[Today at 11:12:27 AM]


GM 6.6l gas 6 speed vs. 10 speed? by Happy Gilmore
[Today at 10:44:31 AM]


Spotting scope mounting plate by Crunchy
[Today at 10:38:16 AM]


5 Points......(mule deer or blacktails) by raydog
[Today at 10:18:03 AM]


Real world feedback needed: Rangefinder Binos by carpsniperg2
[Today at 10:09:28 AM]


2025 Quality Chewuch Tag by boneaddict
[Today at 10:05:39 AM]


I can only take duck at a time! by pianoman9701
[Today at 09:40:15 AM]


Cougar license question by Blacktail Sniper
[Today at 08:59:24 AM]


2024 Ford Edge Opinion/Bought a Chevrolet by C-Money
[Today at 08:47:16 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal