Bow and arrow stand for your range

[T-Dozzer]

I got tired of always bending over to grab my bow or arrows in my back yard range so I put  this together. Took about  30 minutes and cost $20.
Works great! If you need specs, let me know
It can hold 2 bows and about 24 arrows,

[Becky]

That's pretty sweet

[T-Dozzer]

Maybe I should hurry up and get a patent

[Fl0und3rz]

Nice.  Add a couple of 1x2s in the vertical tubes, and you'd have a multifunction target stand bow/arrow holder.

[Band]

Nice job.  Did you need to add weights to the end with arrow holders to keep the weight of the bow from making it fall over?

[T-Dozzer]

Nope. Holds bow(s) just fine with out weight

[Smossy]

Looks like I have a new project for the weekend  

[Smossy]

Nice job.  Did you need to add weights to the end with arrow holders to keep the weight of the bow from making it fall over?

Even if it did, With its design you can just tip it forward.

[Whitpirate]

Looks great


Sent from my iPhone using Tapatalk

[northwesthunter84]

can you pm me the specs that would be awesome

[dmv9]

Is that 3" tube?

[Becky]

Looks like I have a new project for the weekend

Yes, yes you do... kthx

[T-Dozzer]

Is that 3" tube?

Size of pipe doesn't matter. I used inch and half

[T-Dozzer]

Some more

[lokidog]

Looks good. 

Be sure to drill some drain holes in the bottom if left outside so your field tips aren't sitting in water rusting away.

[T-Dozzer]

Ok.....so my message box is filling up with spec requests. I'll i can tell you is go buy the following:

10 foot section of PVC pipe (I used inch and half)
4 90deg elbows
4 T adapters
2 end caps (optional)

Take a look at the pics I posted, you will see how it goes together.
Here are my rough measurements. Keep in mind you don't have to fully seat the connections when gluing so measurements could vary.

The two sections that hold arrows are 12 inches
Main beam for bow is 31ish
The two sections that hold bows are around 6 inches
The three sections between the arrow holders are 3 inches
The 2 pieces between the bow holder  T connector is 6 inches

The base of the holder including connectors is around 20x20

Hope that helps.

You won't need more that 10 feet of pipe unless your bow is very long requiring a longer section to hold the bow.

[northwesthunter84]

Awesome thank you for the info.

[BOWHUNTER45]

sweeeet ..... I will be making me one ...Good job ! You could sell those things as fast as you could make them ..

[BOWHUNTER45]

Anything needed to weigh it down so it does not tip or does it work fine the way it is ?

[T-Dozzer]

No weight needed

[troyspinetar]

Nice! 

[JJD]

Thats pretty cool, I have all the parts, so I might just as well  make one. 
Thanks

[pianoman9701]

I made one this weekend. Thanks for the measurements! And your quote was off by $0.83 - $20.83 total. You owe me, man. 

It's awesome. I really like it. Thank you for posting. 

[Solohunter84]

I made 2 last night! Pretty sweet. Thanks for the info!

[BOWHUNTER45]

This is my project for the day ...headed to town to get supplies .. Hey this is one of the better posts I have seen lately .. seems everyone is having fun with it ...that's great ...I am getting pumped up myself for bow season to get under way ..been hiking everyday and even broke down and got a trailcam and put it out last night ....Shooting my bow last night and bending over to get it finally took its toll ....

[BOWHUNTER45]

I made 2 last night! Pretty sweet. Thanks for the info!

I was wondering why no one has made a camo one yet ...

[T-Dozzer]

I made one this weekend. Thanks for the measurements! And your quote was off by $0.83 - $20.83 total. You owe me, man. 

It's awesome. I really like it. Thank you for posting. 

Check is in the mail

[jordanramos_79]

tag

[BOWHUNTER45]

Here is mine ...the only thing I done different was take my Dremel Tool and rounded the edges on the end of the pipes that hold your bow So there are no sharp edges ..Sand paper will work too ! This will be soooo sweeeet !!! 

[SuperMag]

Well I couldn't not make one, These things are pretty sweet. 

[pianoman9701]

Here is mine ...the only thing I done different was take my Dremel Tool and rounded the edges on the end of the pipes that hold your bow So there are no sharp edges ..Sand paper will work too ! This will be soooo sweeeet !!! 

Isn't that what the end caps are for? 

[SWiley]

This is very cool. I will be making one this weekend.