collapse

Advertisement


Author Topic: Benchbucks  (Read 16767 times)

Offline buckbrush

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2008
  • Posts: 66
  • Location: Renton
Benchbucks
« on: December 06, 2008, 06:54:58 AM »
Anybody hear of "benchbucks"?  Just wondering if this was a local term used where I grew up or it is used in other areas. 

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50682
  • Location: Selah, Washington
Re: Benchbucks
« Reply #1 on: December 06, 2008, 07:04:55 AM »
I guess I have heard of bench-leg but not just short benchbucks.

Offline sportsman002001

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2008
  • Posts: 200
  • Location: Chehalis, Wa
Re: Benchbucks
« Reply #2 on: December 06, 2008, 07:22:36 AM »
I would have to guess they are meaning bench leg bucks.  They are found down around White Salmon and on the back side of White pass and I am sure many other places.  They are deer that are cross bread with Muley and Blacktail.  That is what I have always heard when I hear of a bench leg buck.

Offline archery288

  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2007
  • Posts: 2227
  • Location: Auburn
Re: Benchbucks
« Reply #3 on: December 06, 2008, 07:25:04 AM »
I would have to guess they are meaning bench leg bucks.  They are found down around White Salmon and on the back side of White pass and I am sure many other places.  They are deer that are cross bread with Muley and Blacktail.  That is what I have always heard when I hear of a bench leg buck.

Same meaning, and they are on the West side of the mtns as well.... I think the term is meant more for the ones on the west side then the ones on the eastside of the pass... Pretty much related to the deer around the Pacific Crest Trail...

Offline 270Shooter

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Oct 2008
  • Posts: 3828
  • Location: Yakima
Re: Benchbucks
« Reply #4 on: December 06, 2008, 08:19:49 AM »
In the state record books aren't they called Cascade Blacktailed deer? We have them in Klickitat county and most of western yakima county.

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50682
  • Location: Selah, Washington
Re: Benchbucks
« Reply #5 on: December 06, 2008, 08:27:44 AM »
Just a classification of the deer harvested in that zone.  THey can be pureblood muley and or blacktail and still be considered that. At least in regards to the state, Boone hasn't gone that far.  Benchlegs are pretty obvious crossbred deer usually.

Offline fishunt247

  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 894
  • Location: Yakima, WA
Re: Benchbucks
« Reply #6 on: December 06, 2008, 10:50:41 AM »
I don't want to start anythng, but in the washington books there is a buck that I heard was shot in the yakima canyon above roza dam (Peyser's wifes buck) that is entered as a cascade blacktail. And there are a bunch of deer entered from yakima co. Either I misread the boundaries or something, cause that doesn't make any sense to me. Does anybody know more on this?

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50682
  • Location: Selah, Washington
Re: Benchbucks
« Reply #7 on: December 06, 2008, 10:53:01 AM »
As far as I knew, that wasn't in the boundary.  I killed one up on the top of Bethel and though it was obviously a benchleg...mostly blacktail, it had to be entered as a Mule deer.

Offline blacktail luv

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Nov 2008
  • Posts: 543
  • Location: White Salmon
  • Shed Hunting Fool
Re: Benchbucks
« Reply #8 on: December 06, 2008, 10:59:48 AM »
I live in White Salmon and i know our deer here are classified as the cascade blacktails, even though most of them look like pure bread blackies, to me.  I know the mule deer line is the greyback unit, which is more or less the klickitat river about ten miles east of me.  Once you get east of the town of lyle the deer definately have some mulie in them, there racks look different as do there bodies.  Most of them still have the "blacktail"  not a tail like a mule deer.

Offline 270Shooter

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Oct 2008
  • Posts: 3828
  • Location: Yakima
Re: Benchbucks
« Reply #9 on: December 06, 2008, 12:23:13 PM »
Nearly all of the deer I see in the cowiche unit are benchlegs. Look at the tail on this doe.

Offline Ridgerunner

  • Trade Count: (+2)
  • Old Salt
  • ******
  • Join Date: Mar 2007
  • Posts: 5107
  • Location: Enumclaw
Re: Benchbucks
« Reply #10 on: December 06, 2008, 02:14:20 PM »
99% of the deer I've seen in bumping and rimrock units were benchlegs.

Offline flyguide

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Mar 2008
  • Posts: 229
  • Location: Ellensburg, Washington
    • https://www.facebook.com/redshunting
    • Red's Fly Shop and Hunting
Re: Benchbucks
« Reply #11 on: December 07, 2008, 01:42:06 PM »
I would say that the Ellensburg area is about 50% Benchlag/50% Mule Deer, lots of overlap here.

Dream, Plan, Fish, Hunt.

Offline bankwalker

  • Trade Count: (+7)
  • Sourdough
  • *****
  • Join Date: Nov 2007
  • Posts: 2495
  • Location: Matlock
Re: Benchbucks
« Reply #12 on: December 07, 2008, 02:37:58 PM »
I would say that the Ellensburg area is about 50% Benchlag/50% Mule Deer, lots of overlap here.



ive never seen any buck or doe in the e-burg area that i would call a benchleg. but i have seen quite a few in the snoqualmie pass area that were a forsure cross.

i had a couple does and a small 3pt jump infront of me and a semi this season and the semi hit the buck. i had to stop and check it out and the rack was very small just like a blacktail 3pt but it had a mulie tail. ive never seen a 3pt or even a 2pt mulie with a rack so small. so imo it had to be a benchleg

Offline boneaddict

  • Site Sponsor
  • Administrator
  • Trade Count: (0)
  • Legend
  • *****
  • Join Date: Mar 2007
  • Posts: 50682
  • Location: Selah, Washington
Re: Benchbucks
« Reply #13 on: December 07, 2008, 02:43:13 PM »
HE is about right....depending on what side of E burg you are standing.  Those in the Naneum are muleys or tend to be, those up Manastash and Robinson are often benchlegs.

Offline Red Dawg

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Nov 2007
  • Posts: 1945
  • Location: Granger, WA
Re: Benchbucks
« Reply #14 on: December 07, 2008, 03:04:42 PM »
Here is a roman nose with a black tail.

 


* Advertisement

* Recent Topics

Wildlife Obsession Duvall WA Taxidermy Closing its doors by steeleywhopper
[Today at 01:12:19 PM]


St Patrick’s day by Pathfinder101
[Today at 11:47:33 AM]


Springer season getting close, who's going by 2MANY
[Today at 11:23:31 AM]


370” Siouxon Bull elk by Kingofthemountain83
[Today at 11:14:08 AM]


Looking for a French or American Brittany Dog... by ghosthunter
[Today at 11:05:00 AM]


Montana Big Game Combo Draw chances by Bowbender
[Today at 11:02:46 AM]


Muzzle loading shotguns? Educate me by ghosthunter
[Today at 11:00:02 AM]


Offseason blues by Oldguy
[Today at 10:34:01 AM]


What to do?? by baldopepper
[Today at 10:32:13 AM]


Holy Smokes what a shock!! by Mtnwalker
[Today at 10:09:16 AM]


Hoof rot by WSU
[Today at 08:44:15 AM]


Pellet patio heater in a wall tent by timberhunter
[Today at 08:43:33 AM]


What happens to those best cats? by JakeLand
[Today at 08:06:44 AM]


Gongs? by jrebel
[Yesterday at 09:07:26 PM]


WTB single shot 410 by GoBirds!!
[Yesterday at 08:27:32 PM]


Two trained 5&8yo Elhew English Pointers by 509
[Yesterday at 08:21:16 PM]


Spring Idaho by Dreaded Archer24
[Yesterday at 07:54:25 PM]


CZ 550 mag, long range elk/hitting steel. by crabcreekhunter
[Yesterday at 07:48:19 PM]


Initial Ascent packs made in Taiwan? by Kingofthemountain83
[Yesterday at 06:47:18 PM]


12th Annual - 2026 YOUTH TURKEY HUNT CONTEST (enter by Mar 15) by locdown21
[Yesterday at 06:22:55 PM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal