collapse

Advertisement


Author Topic: First kill with my new custom rifle..  (Read 3581 times)

Offline 87Ford

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Jul 2009
  • Posts: 1321
First kill with my new custom rifle..
« on: September 07, 2014, 12:45:47 AM »
..goes to my son!

     Hunted the east side with my son for a few days this week.  We saw a couple small yearling bears and shot a lot of grouse, but no bears.  We decided to leave early Friday morning and glass a couple areas on the way home.  We arrived at the first spot as it was getting light.  I threw the binos up and right away spotted a bear feeding in the brush and rocks over 500 yards away.   I was a bit skeptical, but my son was sure we could close the distance.  So, we left the 7mm-08 behind and took off with my new Benchmark 280 Ackley Improved.  We quickly got to within about 400 yards, but that was it.  We had come to a large creek and what looked like impenetrable brush beyond.  We agreed that our best bet was to shoot from where we were.  At that point I handed my rifle to my son and told him he could take the shot.
     We scrambled to find a rest while keeping an eye on the bear.   We located a big log to steady the rifle and removed some brush to clear a shooting lane.  While my son was settling in we discussed the shot…where to hold, wait for a broadside shot, squeeze the trigger..
     At this point the bear was feeding in a large bush and was barely visible.  We waited..  Then, she stepped out in full view, but facing away.  We waited another moment and she turned left and presented a nearly perfect broadside shot.  “Now” I said..   I watched the bear through my binos as my son took the shot.  The bear reacted and tumbled about ten feet downhill and lay motionless.  One shot, 410 yards, 280 Ackley Improved, 140 grain Accubond, and, as they say, “dead right there.”
      We looked through the binos at the bear lying dead in the rocks over 400 yards away and marveled at the shot.  High fives and a bit of whooping it up, then the work began.  Three hours later we were back at the truck with the bear and on our way. 

First picture is the bear lying dead up in the rocks after the shot.

Offline sled

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 3559
  • Location: Lake Stevens
Re: First kill with my new custom rifle..
« Reply #1 on: September 07, 2014, 12:54:55 AM »
  Pretty bear :tup:Bear

Offline bearpaw

  • Family, Friends, Outdoors
  • Administrator
  • Trade Count: (+10)
  • Legend
  • *****
  • Join Date: Apr 2009
  • Posts: 38456
  • Location: Idaho<->Colville
  • "Rather Be Cougar Huntin"
    • http://www.facebook.com/DaleDenney
    • Bearpaw Outfitters
  • Groups: NRA, SCI, F4WM, NWTF, IOGA, MOGA, CCOC, BBB, RMEF, WSTA, WSB
Re: First kill with my new custom rifle..
« Reply #2 on: September 07, 2014, 05:15:47 AM »
congrats to your son  :tup:
Americans are systematically advocating, legislating, and voting away each others rights. Support all user groups & quit losing opportunity!

http://bearpawoutfitters.com Guided Hunts, Unguided, & Drop Camps in Idaho, Montana, Utah, and Wash. Hunts with tags available (no draw needed) for spring bear, fall bear, bison, cougar, elk, mule deer, turkey, whitetail, & wolf! http://trophymaps.com DIY Hunting Maps are also offered

Offline Taco280AI

  • Past Sponsor
  • Trade Count: (+6)
  • Frontiersman
  • *****
  • Join Date: Jan 2013
  • Posts: 2961
  • Location: FL350
Re: First kill with my new custom rifle..
« Reply #3 on: September 07, 2014, 07:54:02 AM »
Awesome!  :tup:

My custom AI will have to wait till next year... or maybe even 2016 to get its first. I love what I do, but keep missing hunting season every year.

Offline kevinlisa06

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Mar 2010
  • Posts: 1246
Re: First kill with my new custom rifle..
« Reply #4 on: September 07, 2014, 10:04:51 AM »
Good lookin bear!


Sent from my iPhone using Tapatalk

Offline BOWHUNTER45

  • Non-Hunting Topics
  • Trade Count: (0)
  • Explorer
  • ******
  • Join Date: Nov 2009
  • Posts: 14731
Re: First kill with my new custom rifle..
« Reply #5 on: September 07, 2014, 10:23:32 AM »
Nice ...good looking bear  :tup:

Offline pashok23

  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Aug 2011
  • Posts: 1475
  • Location: Marysville WA
Re: First kill with my new custom rifle..
« Reply #6 on: September 07, 2014, 11:05:34 AM »
 :tup:

Offline Biggerhammer

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Jun 2011
  • Posts: 5142
  • Location: Central Washington
  • Powder, primer, bullet JUNKIE.
Re: First kill with my new custom rifle..
« Reply #7 on: September 07, 2014, 11:15:11 AM »
Well done! How did the Accubond perform? I really like them.

Offline Jrod79

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2013
  • Posts: 155
  • Location: Olywater
Re: First kill with my new custom rifle..
« Reply #8 on: September 07, 2014, 04:58:25 PM »
That's awesome!

Offline tyrant27

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Nov 2013
  • Posts: 33
  • Location: Olympia
Re: First kill with my new custom rifle..
« Reply #9 on: September 07, 2014, 08:50:51 PM »
Impressive shot. That's great!

Offline Payne

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jun 2014
  • Posts: 194
  • Location: Wenatchee
    • https://www.facebook.com/paynard
    • Awdience Graphic Design
  • Groups: RMEF, NRA
Re: First kill with my new custom rifle..
« Reply #10 on: September 07, 2014, 10:18:29 PM »
 :yeah:

Offline 87Ford

  • Political & Covid-19 Topics
  • Trade Count: (+3)
  • Sourdough
  • *****
  • Join Date: Jul 2009
  • Posts: 1321
Re: First kill with my new custom rifle..
« Reply #11 on: September 08, 2014, 06:26:43 PM »
Well done! How did the Accubond perform? I really like them.

We were in a hurry to get the bear off the hill as it was getting warm and we both had to be to work that evening.  Upon quick inspection we could not find where the bullet hit and there was no exit wound.  When we got home and skinned the bear we saw that the bullet struck and broke the left shoulder.  Lots of damage, rather devastating.  We never did recover the bullet..     

Offline ROCKWHEELER

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Sep 2014
  • Posts: 73
  • Location: Monroe,wa
Re: First kill with my new custom rifle..
« Reply #12 on: September 15, 2014, 08:44:36 PM »
Nice bear with a awesome round

 


* Advertisement

* Recent Topics

2025 OILS! by HillHound
[Today at 02:03:00 AM]


2025 Draw Results by JDArms1240
[Today at 01:55:11 AM]


Norway pass Elk by moocher97
[Today at 12:11:05 AM]


Toutle Quality Bull - Rifle by moocher97
[Today at 12:00:21 AM]


NEED ADVICE: LATE after JUNE 15th IDAHO BEAR by huntnnw
[Yesterday at 11:20:59 PM]


Mature bulls during late season? by Dark2Dark
[Yesterday at 10:53:27 PM]


Cowiche Unit 368 by Limhangerslayer
[Yesterday at 10:41:37 PM]


Put in for a tag I NEVER thought I would draw. by elkrack
[Yesterday at 10:15:14 PM]


Awesome customer service by deerlick
[Yesterday at 10:13:19 PM]


Commercial crab pots going in today. by Stein
[Yesterday at 09:37:31 PM]


FFL preferences or warnings in Olympia or south Sound area? by ASHQUACK
[Yesterday at 09:34:36 PM]


Boat registration by Stein
[Yesterday at 09:31:52 PM]


Flatlanders coming west in 2024, any WA mule deer outfitter recommendations by Beastmonger1987
[Yesterday at 09:31:21 PM]


2024 deer. Let’s see um! by Beastmonger1987
[Yesterday at 09:11:35 PM]


Muzzy Mission Quality!!! by crabcreekhunter
[Yesterday at 09:11:30 PM]


Unknown Suppressors - Whisper Pickle by xrangerx
[Yesterday at 09:06:49 PM]


Stillaguamish 448 QD rifle tag by Bo_nimrod
[Yesterday at 09:03:46 PM]


Nevada mule deer in the rut, followed by late rifle elk in Arizona by Beastmonger1987
[Yesterday at 08:36:20 PM]


Teanaway bull elk by 1buckdown
[Yesterday at 08:34:43 PM]


Colockum Archery Bull Tag by oldleclercrd
[Yesterday at 08:31:58 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal