Hunting Washington Forum
Washington State Hunting Forum and Northwest Resource Site
Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News:
Free:
Contests & Raffles
.
Home
Help
Calendar
Advertise
Login
Register
Hunting Washington Forum
»
Community
»
Trail Cameras
»
Homebrew Trailcameras
Advertisement
Advertise Here
« previous
next »
Print
Pages:
1
...
25
26
[
27
]
28
29
...
33
Go Down
Author
Topic: Homebrew Trailcameras (Read 136146 times)
BobR
Trade Count:
(
0
)
Hunter
Join Date: May 2007
Posts: 123
Re: Homebrew Trailcameras
«
Reply #390 on:
January 29, 2009, 09:03:00 PM »
Griz, .65 is supposed to give you the maximum distance the motion detector can detect motion. That is about 5/8". I have had cameras that were off an 1/8" either way, and I could tell no difference.
Greg, I have never had a false trigger with my homebrews. The homebrew control boards are far superior to the electronics in factory trailcams.
Bob
Logged
Advertise Here
Grizzly95
Trade Count:
(
0
)
Sourdough
Join Date: Sep 2008
Posts: 1158
Location: Outlook, Wa
Re: Homebrew Trailcameras
«
Reply #391 on:
January 29, 2009, 10:40:24 PM »
I got bored tonight and took my old camera apart and started messing with it, I located the shutter button and then power and common. After I saolded them together I hooked them up to the control board and it worked! but then I let it go to rest mode and then made movement and it powered up but I forgot that this camera always goes to the menu first and you have to push a button to get it to take pictures DAMN! At least I feel better about trying them now.
Logged
"Let us speak courteously, deal fairly, and keep ourselves armed and ready." - Theodore Roosevelt
div4gold`
Trade Count:
(
0
)
Scout
Join Date: Jan 2009
Posts: 301
Location: Ocean Shores, WA
1/20/13 Obama's Last Day
Re: Homebrew Trailcameras
«
Reply #392 on:
January 31, 2009, 02:11:17 PM »
Is the Sony W150 a suitable camera with similar wiring as the W90?
Logged
gkowen
Trade Count:
(
0
)
Hunter
Join Date: Jan 2009
Posts: 156
Location: Lewis County WA
Re: Homebrew Trailcameras
«
Reply #393 on:
January 31, 2009, 03:46:36 PM »
hi div4gold,
I have done a w150 and it was different than the w80 or w90 but still doable. Look on the yeticam site and under the manuals section there are some pics of the w130. Those pics show you the process. Tonight I plan to test the speed of the 150 and the 80. These are the 2 cams I have done. It seems to work fine.
Logged
div4gold`
Trade Count:
(
0
)
Scout
Join Date: Jan 2009
Posts: 301
Location: Ocean Shores, WA
1/20/13 Obama's Last Day
Re: Homebrew Trailcameras
«
Reply #394 on:
January 31, 2009, 04:09:19 PM »
So the wiring on the W130 and the W150 are similar? I did look at the wiring on the W130 on the Yeti site. Let us know how the W80 / W150 test comes out. I'm still in the planning stage. I may end up with the W200 after seeing the quality of Bob's pictures. Some of the pictures I've seen with the W80 and W90's are pretty good also.
Logged
BobR
Trade Count:
(
0
)
Hunter
Join Date: May 2007
Posts: 123
Re: Homebrew Trailcameras
«
Reply #395 on:
February 01, 2009, 01:53:55 AM »
Rick, The W 200 is almost the same as the 80 and 90 with a few differences. There is no internal screw on the end of the camera, and the shutter assembly is not held together by a screw. Also, the assembly only has three clips holdng it together. But this camera has a different shutter board.
The arrows in these pictures show the solder locations.
Red - Power
Black - Ground
Green - Shutter
This is a very difficult camera to get the wires out. I finally figured out an easier way. Clip the wires that connect the microphone to the board. This picture shows how to route the wires over to the microphone opening. I put a small spot of hot glue to hold the wires in place where the yellow dots are in this picture. After the camera is back together, put the servo on top of the camera.
Bob
«
Last Edit: February 01, 2009, 02:00:53 AM by BobR
»
Logged
BobR
Trade Count:
(
0
)
Hunter
Join Date: May 2007
Posts: 123
Re: Homebrew Trailcameras
«
Reply #396 on:
February 01, 2009, 02:23:20 AM »
Baseballstud, When you take the wires out the microphone opening, they cannot cross the pads or interfere with the operation of the buttons. The wires need to be routed like in this picture, and it helps to glue the wires so they stay in place.
Bob
Logged
Machias
Trapper
Trade Count:
(
+5
)
Explorer
Join Date: Mar 2007
Posts: 18929
Location: Worley, ID
Re: Homebrew Trailcameras
«
Reply #397 on:
February 01, 2009, 11:02:06 AM »
Serious frustration set in last night
I finally had to put the shutter board away last night at 1115. I cannot get the white wire to stay on. I tried 6 times last night and had to take the camera apart all 6 times. Red and blue wire work fine, white is driving me crazy. I am going to go buy some flux here shortly and see if that helps, if not the camera may end up flying up against the wall!!!!
I even taught my wife and had her do it and the white wire ended up being cut while she was putting the shutter board assembly back together. I think I am going to run the wires out the microphone hole. I will glue the wires....once I get the white wire to stick.
P.S. Which ever one of you suckers outbid me last night on the 90 with 5 seconds to go, grrrr
Logged
Fred Moyer
When it's Grim, be the GRIM REAPER!
WASHBCBOOK
Trade Count:
(
0
)
Hunter
Join Date: Sep 2008
Posts: 212
Location: toledo
whack um and stack um
Re: Homebrew Trailcameras
«
Reply #398 on:
February 01, 2009, 11:12:44 AM »
THAT MAY BE ME EBAY USER NAME peters4kids i won the w90 and the w80 from the same seller
Logged
take your kids hunting
whacker1
Trade Count:
(
+3
)
Old Salt
Join Date: Dec 2008
Posts: 5816
Location: Spokane
Re: Homebrew Trailcameras
«
Reply #399 on:
February 01, 2009, 02:01:47 PM »
apparently we need to take turns on e-bay
Logged
bearbait
Trade Count:
(
0
)
Tracker
Join Date: Mar 2007
Posts: 87
Location: Medical Lake (Spokane)
Re: Homebrew Trailcameras
«
Reply #400 on:
February 01, 2009, 06:01:05 PM »
Finally got my case all done, board in and hooked up, w90 hacked and was in the final part of hooking up the servo wires when the small red wire came out of the servo pin. As it was crimped and soldered in and I can't redo it. Anyone know where I can locally get an unwired servo or some pins for the servo?
Machias:
If you need anything to finish your case let me know. I have 1 1/4 " and 1" hole saw, Bondo, paint, wires, and even some flux if you are in need.
Cosco has 2 pack 2gig memory sticks for less than $20.
Logged
Ridgeratt
Washington For Wildlife
Trade Count:
(
+11
)
Old Salt
Join Date: Sep 2008
Posts: 5884
IBEW 73 (Retired) Burden on the working class.
Re: Homebrew Trailcameras
«
Reply #401 on:
February 01, 2009, 06:17:13 PM »
Just solder the wire to the pin. The front hole in the connector has a barb on it so push down carefully and push back with a straight pin. When you put it back if it doesn't stay Carefully bend the barb up just a RCH and re insert
Logged
Grizzly95
Trade Count:
(
0
)
Sourdough
Join Date: Sep 2008
Posts: 1158
Location: Outlook, Wa
Re: Homebrew Trailcameras
«
Reply #402 on:
February 01, 2009, 06:53:01 PM »
I sat my soldering iron on the servo plug so I just eliminated the servo all together.
Logged
"Let us speak courteously, deal fairly, and keep ourselves armed and ready." - Theodore Roosevelt
BobR
Trade Count:
(
0
)
Hunter
Join Date: May 2007
Posts: 123
Re: Homebrew Trailcameras
«
Reply #403 on:
February 01, 2009, 08:39:45 PM »
Fred, Look at the picture below. I put a red dot on the shutter trace. Take a scribe or sharp instrument and try to scratch the board to reveal the foil trace. Do this on the edge of the trace and do not remove the trace. Then solder the wire to the exposed trace. You could also try to scratch the trace where you have been trying to solder the wires. If you get a connection, put a spot of super glue or hot glue to help hold the wire while you put the assembly back together.
Bob
Logged
Machias
Trapper
Trade Count:
(
+5
)
Explorer
Join Date: Mar 2007
Posts: 18929
Location: Worley, ID
Re: Homebrew Trailcameras
«
Reply #404 on:
February 01, 2009, 09:28:55 PM »
Thanks Bob!
Thanks Bearbait, but I got everything. My 30 gauge wire got here Sat.
Logged
Fred Moyer
When it's Grim, be the GRIM REAPER!
Advertise Here
Print
Pages:
1
...
25
26
[
27
]
28
29
...
33
Go Up
« previous
next »
Hunting Washington Forum
»
Community
»
Trail Cameras
»
Homebrew Trailcameras
Advertisement
Advertise Here
Quick Links
Front Page
Donate To Forum
Advertise on H-W
Recent Posts
Articles
Forum Rules
Recent Topics
Cowiche Cow Archery Tag - Group Hunt
by
VickGar
[
Today
at 12:45:06 PM]
Ritzville Rifle Buck - GMU 284
by
Sundance
[
Today
at 12:37:11 PM]
Eastern WA-WT hunting from tree stands??
by
finnman
[
Today
at 12:28:44 PM]
Vashon Island deer tag
by
swanderek
[
Today
at 12:27:06 PM]
Rehome for GWP
by
metlhead
[
Today
at 12:25:21 PM]
Oregon results posted.
by
finnman
[
Today
at 12:23:59 PM]
Idaho 2025 Controlled Hunts
by
Shooter4
[
Today
at 12:13:32 PM]
Stillaguamish 448 QD rifle tag
by
Hi-Liter
[
Today
at 12:06:37 PM]
Palouse/Mica (GMU 127) Access for Trades Work
by
andersonjk4
[
Today
at 12:00:59 PM]
Muzzy Mission Quality!!!
by
finnman
[
Today
at 11:54:18 AM]
Entiat Quality tag
by
psr81
[
Today
at 11:31:34 AM]
Colockum Archery Bull Tag
by
throttlejocky20
[
Today
at 11:27:12 AM]
For the Vortex guys
by
pianoman9701
[
Today
at 11:23:45 AM]
Teanaway bull elk
by
throttlejocky20
[
Today
at 11:23:44 AM]
Palouse buck deer
by
MMCCAULEY
[
Today
at 11:09:55 AM]
2025 OILS!
by
HillHound
[
Today
at 10:25:46 AM]
Awesome customer service
by
Stein
[
Today
at 10:22:51 AM]
Boat registration
by
Alchase
[
Today
at 10:15:57 AM]
Youth Cow Tag
by
DUCKDUDE
[
Today
at 09:10:29 AM]
Pogue Quality
by
DUCKDUDE
[
Today
at 09:03:01 AM]
SimplePortal 2.3.7 © 2008-2025, SimplePortal