collapse

Advertisement


Author Topic: Looking for a replacement powder for H870  (Read 4461 times)

Offline Badhabit

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: May 2007
  • Posts: 1228
Looking for a replacement powder for H870
« on: October 04, 2014, 02:40:59 PM »
Years ago I reloaded for my 7mm Weatherby Mag with 175 grn Nosler partitions. Had a screamer load that was for me pretty accurate. I see they don't make H870 anymore so I'm looking to what replacement powders are out there that and push a 175 grn Nosler Partition at 3000 fps or better and not blow the rifle apart.

Offline yorketransport

  • Political & Covid-19 Topics
  • Trade Count: (+12)
  • Frontiersman
  • *****
  • Join Date: Apr 2009
  • Posts: 3310
  • Location: Yelm
  • Preferred pronouns: were/was
Re: Looking for a replacement powder for H870
« Reply #1 on: October 04, 2014, 06:44:25 PM »
If you want a more readily available replacement then try Hodgdon's US869. If you want to stick with H 870 you can still get it. It's sold by ThunderBird Cartridge Co. as T-870. It's the same powder as H870.

Andrew

Offline Jim the Plumber

  • Local Legend
  • Trade Count: (+2)
  • Scout
  • ****
  • Join Date: Feb 2009
  • Posts: 469
  • Hunting trespassers from the air
    • http://precisiontactical.co/
Re: Looking for a replacement powder for H870
« Reply #2 on: October 04, 2014, 10:05:46 PM »
Badhabit, what's your location? I have a pound of H870 I'll give you, no charge.

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: Looking for a replacement powder for H870
« Reply #3 on: October 04, 2014, 10:22:50 PM »
I'll need to find Lapua's burn chart again to make absolute certain I remember correctly, but seems to me N570 had the identical burn rate.  Just a little bit slower than Retumbo.
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: Looking for a replacement powder for H870
« Reply #4 on: October 04, 2014, 10:26:19 PM »
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline Badhabit

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: May 2007
  • Posts: 1228
Re: Looking for a replacement powder for H870
« Reply #5 on: October 05, 2014, 10:57:23 AM »
Wow, Thanks for the generous off Jim the Plumber. I'm in Yakima, and get to the Potholes fairly often during duck season.

 


* Advertisement

* Recent Topics

Swakane Ram by elkrack
[Today at 08:25:01 PM]


Selkirk bull moose. by trophyhunt
[Today at 07:54:48 PM]


Jim Horn's elk calling, instructional audio CD's. by WapitiTalk1
[Today at 07:40:33 PM]


After a couple years of poor health,... by Karl Blanchard
[Today at 07:20:46 PM]


DR Brush Mower won't crank by Boss .300 winmag
[Today at 05:03:05 PM]


Goose hunting with vice grips by Pegasus
[Today at 04:51:23 PM]


Colockum Archery Bull Tag by geauxtigers
[Today at 04:40:38 PM]


Drew Cleman Mountain Any Ram! by Ridgerunner
[Today at 04:15:12 PM]


Public Land Sale Senate Budget Reconciliation by GeoSwan
[Today at 04:12:47 PM]


Back up camera by Blacklab
[Today at 11:54:30 AM]


Drew Quality by hunter399
[Today at 11:12:45 AM]


Youth Cow Tag by Sundance
[Today at 10:55:51 AM]


Idaho 2025 Controlled Hunts by huntinluva
[Today at 10:01:53 AM]


Cowiche Quality Buck by buglebuster
[Today at 05:58:49 AM]


People on Cams by hunter399
[Today at 05:56:38 AM]


Norway pass Elk by furbearer365
[Today at 05:46:12 AM]


Norway Pass Bull by High Climber
[Yesterday at 09:23:10 PM]


Greenriver quality Elk permit by IDWAHunt
[Yesterday at 07:54:08 PM]


Steel Targets??? by bowman
[Yesterday at 07:41:07 PM]


Is FS70 open? by CarbonHunter
[Yesterday at 06:08:08 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal