Need some carb work, anyone help?

[WoodlandShooter]

As stated, drain the fuel and start over with new.

Also, with the new Ethanol fiel, it plays hell with the jets. If they wont idle well, most likely the pilot jet and possibly the entire pilot circuit is gunked up. Replace the pilot jet if it is corroded.

[Becky]

I'm thinking bunked up crabs from years old gas...

what? hahahah I'm dying  .

[Buckmark]

Sell me the bigger one and then you will have funds to fix the other...

[Becky]

Sell me the bigger one and then you will have funds to fix the other...

Neverrrrr. He hasn't even gotten a chance to ride 'err yet, he thinks he's having fun on my 250 but I think he's gonna love the 400.

[Stein]

I used Youtube and an ultrasonic cleaner I got on clearance from Midway USA along with a dose of Seafoam.  I'm not a mechanic, but I can watch videos and turn a wrench.  They are pretty easy to clean and rebuild and the kits are $20 or so for the two I worked on.

[gr8whthunter]

if no body has said this yet you have water in your fuel sounds like, i would drain the gas in the tanks and remove the carbs and take the bowl off the bottom it should only be 2 or 3 phillips screws holding the bowl on, not hard to spot the bowl its on the direct bottom of the carb really simple