collapse

Advertisement


Author Topic: Powder Question  (Read 2622 times)

Offline RB

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2011
  • Posts: 2967
  • Location: Arlington, washington
Powder Question
« on: November 06, 2014, 10:05:37 AM »
Quick question about Rifle powder for .300 Winmag and 30-06 about how many rounds can a guy get out of one pound of powder? Obviously it will take more powder for the .300 but just looking into reloading and not sure about a few things.

Also I pretty much just shoot Federal Premium Nosler Partition right now can I get a recommended powder that is similar to what they load with?

Thanks
IAFF #3728

Offline h20hunter

  • Trade Count: (+16)
  • Legend
  • ******
  • Join Date: Jan 2010
  • Posts: 20872
  • Location: Lake Stevens
Re: Powder Question
« Reply #1 on: November 06, 2014, 10:07:32 AM »
I think with the various load variations and powder types thats an impossible question to answer. 3000 7000  :chuckle: grains in a lb right....so look at your average loads, do the division, leave some room for mistakes or whoopsies and go from there.
« Last Edit: November 06, 2014, 10:14:09 AM by h20hunter »

Offline MP123

  • Past Sponsor
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Dec 2009
  • Posts: 1048
Re: Powder Question
« Reply #2 on: November 06, 2014, 10:11:11 AM »
1lb. = 7,000 grains.  So just divide by the load you're using.  Somewhere between 150-200 loaded rifle rounds most likely...



Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3308
  • Location: Spokane Wa.
Re: Powder Question
« Reply #3 on: November 06, 2014, 11:09:34 AM »
It'll partly depend on what bullet/s and what powder you use but I wouldn't expect to get much more than 125rnds out of a lb for the 30-06 and 100rnds per lb for the 300 win. mag.

Powders with a faster burn rate will take less grains per round but for the most part you'll be right around 55 grains per round in a 30-06 and 70 grains per round in 300 Win mag.

Offline BULLBLASTER

  • Non-Hunting Topics
  • Trade Count: (+15)
  • Old Salt
  • ******
  • Join Date: Oct 2008
  • Posts: 8104
Re: Powder Question
« Reply #4 on: November 06, 2014, 12:00:25 PM »
Like others have said on rhe grains per pound. As for powder i use imr 4350 in my 30-06 with 180 grain partitions. With gold results.

Offline Rooster1981

  • R.K.
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Feb 2011
  • Posts: 683
  • Location: Mason County
    • Roosters Kennel
Re: Powder Question
« Reply #5 on: November 06, 2014, 12:06:25 PM »
I get 120 rounds with imr 4831 when loading my 30-06.
Hunting hounds since 1993

Offline RB

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2011
  • Posts: 2967
  • Location: Arlington, washington
Re: Powder Question
« Reply #6 on: November 06, 2014, 07:13:40 PM »
Cool thanks guys that is what I am looking for knew I could get quite a few rounds per pound but did not even know a ball park figure. I know there are plenty of bullets to choose from, but I have used Partitions for a looooong time and really like them mostly because I know how they will perform every time.  :tup:
IAFF #3728

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15186
  • Location: Sultan/Wisconsin
Re: Powder Question
« Reply #7 on: November 06, 2014, 08:12:57 PM »
My 30-06 gets 120 rounds out of IMR4350.  I shoot 165's.

Offline RB

  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2011
  • Posts: 2967
  • Location: Arlington, washington
Re: Powder Question
« Reply #8 on: November 06, 2014, 08:25:09 PM »
My 30-06 gets 120 rounds out of IMR4350.  I shoot 165's.

Right on thanks, yeah I was shooting 180's in both my .300 and 30-06 but switched to 165's in the -06 (Partitions). Was trying to figure price for a box of reloads compared to factory but did not know approximate rounds per pound of powder.  :tup:
IAFF #3728

Offline lokidog

  • Trade Count: (+6)
  • Explorer
  • ******
  • Join Date: Mar 2009
  • Posts: 15186
  • Location: Sultan/Wisconsin
Re: Powder Question
« Reply #9 on: November 07, 2014, 06:59:30 AM »
My 30-06 gets 120 rounds out of IMR4350.  I shoot 165's.

Right on thanks, yeah I was shooting 180's in both my .300 and 30-06 but switched to 165's in the -06 (Partitions). Was trying to figure price for a box of reloads compared to factory but did not know approximate rounds per pound of powder.  :tup:

I think you will be happy with the 165's as far as accuracy goes, every (3) -06 I have shot them out of loves the same load, 56.5 gr (use at your own risk, blah, blah, blah    :chuckle: ).

 


* Advertisement

* Recent Topics

Goose hunting with vice grips by Night goat
[Today at 08:46:21 AM]


Drew Quality by Ridgerunner
[Today at 08:32:55 AM]


Youth Cow Tag by jhouckwsu
[Today at 07:16:57 AM]


Cowiche Quality Buck by buglebuster
[Today at 05:58:49 AM]


People on Cams by hunter399
[Today at 05:56:38 AM]


Norway pass Elk by furbearer365
[Today at 05:46:12 AM]


Norway Pass Bull by High Climber
[Yesterday at 09:23:10 PM]


Greenriver quality Elk permit by IDWAHunt
[Yesterday at 07:54:08 PM]


Steel Targets??? by bowman
[Yesterday at 07:41:07 PM]


Is FS70 open? by CarbonHunter
[Yesterday at 06:08:08 PM]


Fun little Winchester 1890 project by Dan-o
[Yesterday at 04:24:08 PM]


Idaho unit 76 cow elk Oct 25 to Nov 15 by bornhunter
[Yesterday at 02:11:35 PM]


Selkirk bull moose. by lewy
[Yesterday at 10:34:16 AM]


No trespassing, hunting, fishing signs posted along Skykomish river by jackelope
[Yesterday at 10:11:26 AM]


Sheep Ewe - Whitestone Sheep Unit 20 by geauxtigers
[Yesterday at 09:55:59 AM]


2025 OILS! by geauxtigers
[Yesterday at 09:14:25 AM]


Looking for English Pointer pup (Elhew and/or Guard Rail lines) by Tafinder
[Yesterday at 07:22:10 AM]


Buying pheasants for training by trapp01
[June 14, 2025, 08:44:40 PM]


Mt. Spokane North Moose by Farmer72
[June 14, 2025, 08:12:24 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal