Author Topic: Feed back on Talley light weight rings (Read 5493 times)

carpsniperg2 · « **on:** November 16, 2014, 03:49:24 PM »

I am trying to save some weight on a build I am working on. I have 1 set of light weight talley rings on another rifle. They have been good and not let me down. I am just looking for more positive feedback before I mount a set on this rifle.

6x6in6 · « **Reply #1 on:** November 16, 2014, 03:55:18 PM »

Zero issues in 4 seasons on my Tikka T3 in 7mmRM.

carpsniperg2 · « **Reply #2 on:** November 16, 2014, 04:06:10 PM »

Thanks mine are on a 300wsm tikka. I am in 2 seasons with mine and had zero issues. The gun has taken 1 boar hog/ 2 bucks and my cousin just shot a bull with it. I am pretty much a warne guy. So I am just wanting to see if I have been lucky with my set or if they are good stuff

elkaholic123 · « **Reply #3 on:** November 16, 2014, 04:09:21 PM »

Put them on my new 26 Nosler, love em

zwickeyman · « **Reply #4 on:** November 16, 2014, 04:37:39 PM »

I have them on my Tikka T3 lite as well. great quality light weight rings

HighCountryHunter88 · « **Reply #5 on:** November 16, 2014, 04:41:30 PM »

300 win superlite no problems

Emptyhanded · « **Reply #6 on:** November 16, 2014, 06:01:12 PM »

My buddy is running them on a 700 CDL in 7 RUM. He's had it for two seasons and no issues.

Sent from my iPhone using Tapatalk

Buzz2401 · « **Reply #7 on:** November 16, 2014, 06:12:53 PM »

I got them on a 325 WSM Kimber montana no problems.

carpsniperg2 · « **Reply #8 on:** November 16, 2014, 06:14:37 PM »

Thanks everyone. Sounds like my results are pretty typical and they are good rings. So I think I will put a set on this new rifle.

tecwoody · « **Reply #9 on:** January 22, 2015, 12:27:55 AM »

I got them for my t3 super light in 300wm. Heard lots of good things about them so I was pretty surprised when sighting in at the range on the 4th shot my scope flew off. I had torqued the screws to there specs, the screws pulled the threads and were left in my reciver. When I called them we came to the conclusion that they had been packaged with the wrong length screws so they sent me the right ones. No problems since, just make sure you get the right length screws.

jackelope · « **Reply #10 on:** January 22, 2015, 07:24:26 AM »

I've got the Talley LW 1 piece'r on 3 of my Encore barrels. Pretty slick and zero issues.

MtnMuley · « **Reply #11 on:** January 22, 2015, 08:09:08 AM »

I run them on a Christensen Custom 300 RUM and the advice I'll give is to not over tighten the ring screws. They will snap after a few shots. 18 ft/lbs I believe is max.

bobcat · « **Reply #12 on:** January 22, 2015, 08:24:24 AM »

I've got Talleys on a Weatherby 30/06 and a Browning A bolt in 223 WSSM. Never any issues. I love the simplicity of them. Mounting a scope with Talleys couldn't be easier.

kentrek · « **Reply #13 on:** January 22, 2015, 08:51:30 AM »

Quote from: MtnMuley on January 22, 2015, 08:09:08 AM

I run them on a Christensen Custom 300 RUM and the advice I'll give is to not over tighten the ring screws. They will snap after a few shots. 18 ft/lbs I believe is max.

257 Wby Mag · « **Reply #14 on:** January 22, 2015, 09:05:45 AM »

Got 10-12 pairs of em, 243 to 340 Wby, never a problem..

duckman18 · « **Reply #15 on:** March 12, 2015, 06:53:27 PM »

I've got a set on a tikka ultralight .300 win mag and haven't had any problems.

JJD · « **Reply #16 on:** March 22, 2015, 04:07:13 PM »

I believe just about anything Talley puts out is going to be good.
That being said, the miniscule weight saving in rings would not be worth it to me.
I like glass mounting hardware that is he** for stout and then never give it a second thought.

To each his own.

News:

Advertisement

Author Topic: Feed back on Talley light weight rings (Read 5493 times)

Advertisement

Quick Links

Recent Topics