collapse

Advertisement


Author Topic: Noisy bow  (Read 2689 times)

Offline Balladeer

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Dec 2008
  • Posts: 111
  • Location: Snoqualmie
Noisy bow
« on: December 28, 2008, 02:15:38 PM »
Looking for info on how to quite down my bow. When I draw it back, it makes a creaking noise. I bought some graphite and put it on the cams, but didn't have any luck. Am I using the right lubricant? What about placement? Also, it's an older bow. Do the cables need to be replaced? Thanks

Offline robodad

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Nov 2007
  • Posts: 4437
  • Location: PA, WA.
    • frog4life !!
Re: Noisy bow
« Reply #1 on: December 28, 2008, 02:21:38 PM »
Might try putting some where the limbs meet the riser, (pivot point) I had one creek every now and then, I just sprayed a tiny bit of 3 in one oil and it went away !!  :dunno:
The essense of freedom is the proper limitation of government !!!

Offline bowhuntin

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: May 2007
  • Posts: 1374
  • Location: Auburn
Re: Noisy bow
« Reply #2 on: December 28, 2008, 02:45:50 PM »
I am no expert but I would not lube my bow myself. As far as I know I would take it to a proshop and have them look at it. I believe it is recommended to replace your string every year, but I believe as long as you keep your string waxed and you don't shoot it as much as some guys you can probably go longer with it than a year. If you shoot it a lot I would get a new string.

Offline bullcanyon

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1293
  • Location: Lewiscounty
Re: Noisy bow
« Reply #3 on: December 28, 2008, 09:02:23 PM »
Is it coming from the cable slide?  Try spitting on it and manually moving it back and forth. Than draw the bow back and see if it is still there.  If that is your problem.  You can buy a teflon one that should be quiter.

Offline jae

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Oct 2007
  • Posts: 662
  • Location: Cowlitz County
Re: Noisy bow
« Reply #4 on: December 29, 2008, 07:03:49 PM »
What bow do you have? I know that the Mathews newer bows that have QCC'S tend to make a popping sound when drawn.

Offline Balladeer

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Dec 2008
  • Posts: 111
  • Location: Snoqualmie
Re: Noisy bow
« Reply #5 on: December 29, 2008, 07:37:21 PM »
It's an older Martin Cougar Speed Flight.

Offline kingsalmonkllr77

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Sep 2008
  • Posts: 130
Re: Noisy bow
« Reply #6 on: January 01, 2009, 07:05:44 PM »
Possibly uneven tension where your cables attach to your limbs.  When you draw it back look at the upper and lower cams use the string to see if your cams look vertically straight.  If they are twisted you might have a tech add some twists to your cable ends to pull it straight.  Had the same problem a few years ago.

Offline Wolf Track

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Dec 2008
  • Posts: 61
  • Location: Montana
Re: Noisy bow
« Reply #7 on: January 02, 2009, 03:55:45 AM »
Mine sounded like a gun going off...

I had a Martin Pride split limb

What I did to fix the problem was to put two sets of Limb Savers on each end, two sets of wiskers into the strings and cables (wiskers worked the best and lasted the longest compared to other string dampeners)

Picked up a top of the line counter balance dampener (the one that pokes out the front of the bow in front of your hand)

Lastly, went to a drop rest

All of these things made the bow almost completely silent...
A good soldier is a poor scout. - Cheyenne

Offline Balladeer

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Dec 2008
  • Posts: 111
  • Location: Snoqualmie
Re: Noisy bow
« Reply #8 on: January 03, 2009, 01:05:18 AM »
Thanks very much for your input. I'm gonna have to take her into the shop. Maybe it's time for a new one.

 


* Advertisement

* Recent Topics

Bass Pro Strikes Again by Rat44
[Today at 03:12:46 AM]


Cat tracks? by mountainman
[Today at 02:21:59 AM]


Leupold scope recommendation by EnglishSetter
[Yesterday at 10:22:41 PM]


AUCTION: Custom knife by Alden Cole by Dan-o
[Yesterday at 09:31:48 PM]


More Kings! by highside74
[Yesterday at 08:22:26 PM]


HUNTNNW 2025 trail cam thread and photos by Mfowl
[Yesterday at 07:36:54 PM]


Got your bear ID test done..🤟 by ghosthunter
[Yesterday at 07:36:29 PM]


Share your out of state experience by jackelope
[Yesterday at 06:52:14 PM]


Rats in RV roof by SHED REAPER
[Yesterday at 06:14:15 PM]


Happy opening day! by Ghost Hunter
[Yesterday at 05:46:39 PM]


Please Comment on new Game management Plan, RE Furbearers by Not selected
[Yesterday at 03:02:34 PM]


2025 Canning by Twispriver
[Yesterday at 02:34:58 PM]


WSTA 2025 Summer Rendezvous Agenda by JakeLand
[Yesterday at 11:15:59 AM]


Mamma's and babies by Brute
[Yesterday at 11:15:50 AM]


Time to refi? by pianoman9701
[Yesterday at 10:42:51 AM]


Heartbroken!!! by FamilyMan01
[Yesterday at 09:12:23 AM]


Montana general deer by Wingin it
[Yesterday at 08:18:54 AM]


Best Rifle Zero Distance. by EnglishSetter
[Yesterday at 01:14:19 AM]


Pork belly street tacos….. by jrebel
[August 02, 2025, 09:54:24 PM]


Any Rec Tec users here ? by fowl smacker
[August 02, 2025, 09:39:10 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal