Author Topic: Today at Grizz Precision (Read 10829 times)

jay.sharkbait · « **on:** July 14, 2015, 12:03:09 PM »

Finished a couple limited guns and a carry 19

jay.sharkbait · « **Reply #1 on:** July 14, 2015, 12:04:00 PM »

jay.sharkbait · « **Reply #2 on:** July 14, 2015, 12:05:05 PM »

Glock 17

trophyhunt · « **Reply #3 on:** July 14, 2015, 12:09:00 PM »

Very Purdy! What did you do to them to make it custom?

jay.sharkbait · « **Reply #4 on:** July 14, 2015, 06:01:04 PM »

Quote from: trophyhunt on July 14, 2015, 12:09:00 PM

Very Purdy! What did you do to them to make it custom?

2011= slide is lightened by decking the sides, adding windows and running a ball mill down the sides just above the slide serrations. I checkered the top. The frame has lightning cuts on the side and bottom. Rough comp style stippling. Barrel and small parts are TiN coated and the pistol refinished in Biggerhammer's Terminal grey.

Glock 19= Front slide serrations. Ghost trigger. Carry stippling, TiN and more Terminal Grey.

Glock 17= Limited competition gun that showcases what we can do. all the cuts on the slide were done on a manual mill... my head still hurts..

lokidog · « **Reply #5 on:** July 14, 2015, 07:08:19 PM »

Pretty guns!

KimWar1911 · « **Reply #6 on:** July 16, 2015, 12:34:13 PM »

Awesome work. Hope to get my 1911 into you some day.

Sent from my iPhone using Tapatalk

jay.sharkbait · « **Reply #7 on:** July 16, 2015, 02:37:05 PM »

Today was RMR day.

257wbymagkiller · « **Reply #8 on:** July 16, 2015, 04:21:27 PM »

awesome work! what would cost to do the frame of a glock 31 in Flat dark earth?

jay.sharkbait · « **Reply #9 on:** July 16, 2015, 08:30:40 PM »

Quote from: 257wbymagkiller on July 16, 2015, 04:21:27 PM

awesome work! what would cost to do the frame of a glock 31 in Flat dark earth?

70.00 if you send it stripped.

http://www.grizzprecision.com/cerakote.html

jay.sharkbait · « **Reply #10 on:** July 23, 2015, 09:16:25 PM »

The forge got fired up today for some fun.

jay.sharkbait · « **Reply #11 on:** July 25, 2015, 11:12:58 AM »

The first of what will be a production run..

Warhog double stack 9mm

jackelope · « **Reply #12 on:** July 25, 2015, 11:39:50 AM »

Quote from: jay.sharkbait on July 23, 2015, 09:16:25 PM

The forge got fired up today for some fun.

I'm gonna need a bottle opener.

CAMPMEAT · « **Reply #13 on:** July 25, 2015, 01:59:49 PM »

Nice work Matt......

jay.sharkbait · « **Reply #14 on:** July 25, 2015, 02:40:57 PM »

Quote from: jackelope on July 25, 2015, 11:39:50 AM

Quote from: jay.sharkbait on July 23, 2015, 09:16:25 PM
The forge got fired up today for some fun.

I'm gonna need a bottle opener.

http://shop.grizzprecision.com/products/hand-forged-bottle-opener

jackelope · « **Reply #15 on:** July 25, 2015, 02:41:40 PM »

Quote from: jay.sharkbait on July 25, 2015, 02:40:57 PM

Quote from: jackelope on July 25, 2015, 11:39:50 AM
Quote from: jay.sharkbait on July 23, 2015, 09:16:25 PM
The forge got fired up today for some fun.

I'm gonna need a bottle opener.

http://shop.grizzprecision.com/products/hand-forged-bottle-opener

actionshooter · « **Reply #16 on:** July 25, 2015, 05:06:49 PM »

Those bottle openers are damn cool!

jay.sharkbait · « **Reply #17 on:** July 25, 2015, 06:18:31 PM »

Quote from: actionshooter on July 25, 2015, 05:06:49 PM

Those bottle openers are damn cool!

They are. Wait till you see one first hand.

jay.sharkbait · « **Reply #18 on:** July 27, 2015, 04:52:16 PM »

First of the Diamondcoat carriers are here.

These will offer all the advantages of TiN but with a grey color.

WoodlandShooter · « **Reply #19 on:** July 28, 2015, 01:19:14 PM »

Hey I need the lower forklegs on my KTM DLC coated...

jay.sharkbait · « **Reply #20 on:** July 28, 2015, 04:29:50 PM »

Quote from: WoodlandShooter on July 28, 2015, 01:19:14 PM

Hey I need the lower forklegs on my KTM DLC coated...

How big are they and what are they made out of?

2labs · « **Reply #21 on:** July 28, 2015, 09:05:09 PM »

Hi Sharkbait. I have a 30 year old Rem. Nylon that has been a porch/truck gun it's whole life. The receiver and barrel are in rough shape, still shoots awesome.
What would it cost to have it prepped and coated. 20 inch barrel and about 9 inches of receiver.
Thanks.

jay.sharkbait · « **Reply #22 on:** July 29, 2015, 11:38:47 AM »

CZ 527 action wrench and switch barrel prototype.

We will be offering a barrel system similar to the Savage.

WoodlandShooter · « **Reply #23 on:** July 29, 2015, 12:41:51 PM »

Quote from: jay.sharkbait on July 28, 2015, 04:29:50 PM

Quote from: WoodlandShooter on July 28, 2015, 01:19:14 PM
Hey I need the lower forklegs on my KTM DLC coated...

How big are they and what are they made out of?

bearing surface is chrome plates steel, and the axle clamps are aluminim. only need the bearing surface done, it's ~ 18" long

jakeweb · « **Reply #24 on:** August 07, 2015, 06:59:01 PM »

What would it cost to do a glock 19 like that..minus the yellow

jay.sharkbait · « **Reply #25 on:** August 08, 2015, 01:26:10 PM »

AR15/10 side charger knobs are turning now!

CAMPMEAT · « **Reply #26 on:** August 08, 2015, 01:33:59 PM »

Who does the stippling and how long does it take and cost on a 29sf ? Patterns ?

Biggerhammer · « **Reply #27 on:** August 08, 2015, 04:23:08 PM »

I'll take a grey bolt carrier with the side charger installed.

actionshooter · « **Reply #28 on:** August 08, 2015, 05:47:09 PM »

Grizz is going to bankrupt me.........

jay.sharkbait · « **Reply #29 on:** August 08, 2015, 06:36:12 PM »

Quote from: CAMPMEAT on August 08, 2015, 01:33:59 PM

Who does the stippling and how long does it take and cost on a 29sf ? Patterns ?

We do!

Usually a couple weeks and price varies depending on pattern etc (125-175)

Here are some pics

jay.sharkbait · « **Reply #30 on:** August 08, 2015, 06:37:31 PM »

more.....

300rum · « **Reply #31 on:** August 08, 2015, 07:36:50 PM »

The 2011 is nice. All it needs is the grip safety pinned and the triggerguard undercut.

CAMPMEAT · « **Reply #32 on:** August 08, 2015, 07:54:31 PM »

Extra cool stippling.....

WoodlandShooter · « **Reply #33 on:** August 12, 2015, 08:43:48 AM »

Quote from: jay.sharkbait on August 08, 2015, 01:26:10 PM

AR15/10 side charger knobs are turning now!

so, any prints on how to modify my current Bolt carrier and upper to get this to work on my stuff?

jay.sharkbait · « **Reply #34 on:** August 16, 2015, 08:53:48 AM »

Quote from: WoodlandShooter on August 12, 2015, 08:43:48 AM

Quote from: jay.sharkbait on August 08, 2015, 01:26:10 PM
AR15/10 side charger knobs are turning now!

so, any prints on how to modify my current Bolt carrier and upper to get this to work on my stuff?

I can locate and cut your carrier if you like. What kind of upper are you using? I would start with a slab sided upper.(no fwd assist or shell deflector.) and make the side charging slot. Or better yet buy one of the commercially available uppers. MEGA Eisenach, etc

WoodlandShooter · « **Reply #35 on:** August 17, 2015, 08:38:43 AM »

it's just a standard RRA upper, converted to Piston with an adams arms kit with the AA monolithic bolt carrier

jay.sharkbait · « **Reply #36 on:** September 18, 2015, 07:14:24 PM »

Just finished prototyping AR mag extensions.

yorketransport · « **Reply #37 on:** September 19, 2015, 07:43:05 AM »

You guys should really broaden your horizons; ARs are so boring!

But if you've finally out smarted that machine maybe you can come up with something interesting!

What you really need is for some sucker to just throw a pile of parts your way so you can build something in a real caliber!

Andrew

News:

Advertisement

Author Topic: Today at Grizz Precision (Read 10829 times)

Advertisement

Quick Links

Recent Topics