So right now I'm a bit limited on funds and have enough supplies for around 20-25 rounds to reload and have not reloaded much with this caliber. I am hoping to lower the curve on this to get up and running for bear and as time goes on I will further develop a good load. So Here is what I have and I'm looking for advice on starting powder charge for these 20 rounds. I'm hoping to save 10 of them for hunting bear in the next few weeks. I know I'm close to center target on factory rounds that I had so hopefully that is good.
Gun: Winchester Model 70 24" barrel timney 3# trigger
Bullet: Barnes TSX 180 gr
Powder: IMR 4350 (I do have Varget but don't know if that would be good or not)
Winchester brass and nickle cases
Winchester large magnum primers.
My Barnes manual says 57.5-65.5 gr of powder. So given the limited supplies, what are your suggestions on powder charges?
Thanks and I appreciate any and all help. Wish I had more components to develop this cartridge. I did get my 30-06 dialed in good and now its this guns turn to draw blood. I will be out on Ebey Island range tomorrow to test these out.
Oh, also right now I'll just be hunting west side so no long range shots if that makes a difference.
Tony