Reloading

[Bennick16]

I'm brand new to reloading and I found a lee kit on Amazon for $120. I no its not the best quality and I know it's nothing fancy but I just want to go as cheap as possible to see if I like it. After looking at the kit, it seems to have everything except the dies. In the reviews people recommended I get dial calipers aswell to measure shell casing. I am also getting the book " ABC's to reloading"The reviews also suggested getting a tumbler for cleaning. What do you guys have to say about getting into reloading as far as what I need minimum to get started? Can you think of anything else? I will be reloading .223 and 30-06. Thanks for any help guys. This is all so confusing 😁

[Bennick16]

This is the link to what I'm looking at http://www.amazon.com/gp/aw/d/B003ISVWC6/ref=mp_s_a_1_1?qid=1442028917&sr=8-1&pi=SX200_QL40&keywords=reloading+kit&dpPl=1&dpID=51lB6yy2-aL&ref=plSrch

[Coastie_Compton]

If you do bottleneck cartridges you will need to do some trimming also.  Tumbler is a must you can usually get a cheap one with some media included.  Also case lube if not included.  I never liked priming with a press either but try it and see if you like it.

[Stein]

That kit is what I would buy.  Also add the following:

1.  Bullet puller
2.  Tumbler
3.  Calipers

Look for Frankford Arsenal stuff, good quality and very low price.  The three items above shouldn't set you back more than another $90 or so.  If you are tight on money, dump the puller.  If you are really, really, tight on money, dump the tumbler.

Yeah, I forgot the trimmer.  Pick up a Lee Zip trim along with the cutter for the cartridge you are looking at reloading.

[257wbymagkiller]

You will need a tumble to clean your brass and a primer pocket cleaner as well, unless you are buying brass that is primed and tumbled.

How many rounds do you fire of the 30-06 and .223 a year do you think?

[Coastie_Compton]

And if you have a drill i use a taper bit to remove swage from crimped primers on 223

[Fl0und3rz]

If you go with the Lee kit and are considering the Lee trimmer, I have a set that I'd sell you for cheap.  I have .223, a few common pistol cartridges, and a few other rifle cartridges.  It is a nice set for cheap into trimming kit.  I'll have to dig it out if you want more specifics.

[Bennick16]

I'm not sure how much I  will fire, my .223 rifle is a bolt action ruger American, so I won't be shooting thousands of road unds. I will probably put 500-1000 round through my 30-06 as well. FlOund3r I would be interested but I just went to the west side to get a gun and I'm not in a hurry to come back to the traffic! So so far I would need the kit, a tumbler with a brass internal cleaner. And as far as dies go, I have no idea how to work them yet, but the set I was looking at are these http://www.amazon.com/gp/aw/d/B002SEZ5PG/ref=mp_s_a_1_1?qid=1442030314&sr=8-1&pi=SX200_QL40&keywords=lee+.223+die+set&dpPl=1&dpID=51P52ElTemL&ref=plSrch

[Bennick16]

Here is everything that I've gotten, let me know if it sounds good.
Tumbler $36
Walnut lizard bedding (media) $12
Case lube $8
Bullet puller $12
Calipers $11
Lee zip trimmer $30
Lee .223 gauge and holder $5.19
Lee primer pocket cleaner $7.93
Lee .223 die set $30
Lee 30-06 die set 30
So as of now I'm looking at total material investment of around $310
Do I need all the dies in the Die set? I'm still not entirely sure of their function.

[2labs]

Looks good, only thing I might question is where you got 11 dollar calipers?

[Coastie_Compton]

Yes you need all the dies.  There are instructions in the box but it woukd be best if you could get a member in your area to help you learn the ropes on setting them up and reload a few rounds.  If i go see my grandfather in medical lake i could assist.  I helped teach a NRA basic reloading course a few years ago but havent had the time to do it anymore.

[Bennick16]

Looks good, only thing I might question is where you got 11 dollar calipers?

Amazon 

[Bennick16]

I just looked it up and I could reload 1000 rounds of .223 at 21 cents around and could buy factory fmj for 37 cents so I need to see if I'm going to shoot enough to make it even worth it. Reloading my 30-06 would be where I could save the money I think

[2labs]

Your not going to save money for awhile. This is more of a lifetime grumpy old man hobby.

[Fl0und3rz]

Here is everything that I've gotten, let me know if it sounds good.
Tumbler $36
Walnut lizard bedding (media) $12
Case lube $8
Bullet puller $12
Calipers $11
Lee zip trimmer $30
Lee .223 gauge and holder $5.19
Lee primer pocket cleaner $7.93
Lee .223 die set $30
Lee 30-06 die set 30
So as of now I'm looking at total material investment of around $310
Do I need all the dies in the Die set? I'm still not entirely sure of their function.

Get the Lee manual, if it did not come with the Lee kit.  It will explain how to use all the Lee equipment and have a good amount of reloading data.

The Lee zip trim is $20 at midwayusa.  I am also sending a PM with my Lee trimmers.


BTW, I would go with this over the Lee zip trim.

http://www.midwayusa.com/product/476992/lee-case-trimmer-cutter-and-lock-stud

Chuck it in a drill for quick and more convenient trimming.