collapse

Advertisement


Author Topic: 300grn Barnes expander MZ  (Read 17491 times)

Offline NWKrenz

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jun 2015
  • Posts: 51
  • Location: Westside
Re: 300grn Barnes expander MZ
« Reply #30 on: September 28, 2015, 08:45:41 PM »
I would take that about now and call it a day for sure. Good luck on your elk hunt, I hope you can fill the freezer.

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 6436
  • Location: Toledo
Re: 300grn Barnes expander MZ
« Reply #31 on: September 28, 2015, 08:47:34 PM »
I use 110 grains of triple 7 fffg.

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31541
  • Location: Goldendale,WA
Re: 300grn Barnes expander MZ
« Reply #32 on: September 28, 2015, 08:52:03 PM »
I run 110g fffg triple 7. With both the tmz 290 and 290 teez. Always used the tipped bullets myself.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline NWKrenz

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jun 2015
  • Posts: 51
  • Location: Westside
Re: 300grn Barnes expander MZ
« Reply #33 on: September 28, 2015, 08:52:48 PM »
That's what I was shooting tonight but apparently I was adjusting my sight the wrong way. We will see what tomorrow yields.

Do you shoot the 300 grain MZ or 290 TEZ? Also what gun?

Thank you

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31541
  • Location: Goldendale,WA
Re: 300grn Barnes expander MZ
« Reply #34 on: September 28, 2015, 08:56:32 PM »
I have 3 muzzle loaders right now. So I'm running 290 tmz in one. Then 290 tez in the other same amount of powder. Both cva elk horns. The newer one is the one I run the tez in. They load so much nicer. The broke in gun gets the tmz bullets.

I have a brand new optima sitting up stairs and 5 bullet types to try out in it when we get some rain around here :bash:

Good luck on your hunt :IBCOOL:
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline NWKrenz

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jun 2015
  • Posts: 51
  • Location: Westside
Re: 300grn Barnes expander MZ
« Reply #35 on: September 28, 2015, 09:04:28 PM »
Very nice! I've definitely heard that the TEZ load wayeasier than the TMZ's. I bought different sabots for the MZ's, they weren't the crushed ribbed one's but they were some Knight Ez glides and they make a huge difference.

Thank you

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 6436
  • Location: Toledo
Re: 300grn Barnes expander MZ
« Reply #36 on: September 28, 2015, 09:12:58 PM »
Very nice! I've definitely heard that the TEZ load wayeasier than the TMZ's. I bought different sabots for the MZ's, they weren't the crushed ribbed one's but they were some Knight Ez glides and they make a huge difference.

Thank you

Were they the orange ones?

Offline NWKrenz

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jun 2015
  • Posts: 51
  • Location: Westside
Re: 300grn Barnes expander MZ
« Reply #37 on: September 29, 2015, 07:59:29 AM »
Yes they were, have you used them before?

Offline HntnFsh

  • Washington For Wildlife
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Jul 2007
  • Posts: 6436
  • Location: Toledo
Re: 300grn Barnes expander MZ
« Reply #38 on: September 29, 2015, 12:16:20 PM »
Yes they were, have you used them before?

No, But I would like to try them. Am going to check a couple places and see if they have them today. I tried some Harvester crush ribs. They seemed a little on the loose side. Havent shot with them yet to see how they perform though.

Offline sled

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Mar 2010
  • Posts: 3562
  • Location: Lake Stevens
Re: 300grn Barnes expander MZ
« Reply #39 on: September 29, 2015, 01:13:19 PM »
I just got the 300 grn MZ's last night and I definitely see what everyone is talking about. I tried to put one down the barrel last night just to try it and see if it was really that hard.

I have a Knight Bighorn that I bought before the season last year, probably has around 15-20 shots through it.

The bullet made it about half way down and I thought i was going to snap the ramrod. I can only imagine how tough it would be after I shot.

Thinking about getting the crushed ribbed sabots or maybe just the 290 grn TEZ. Running out of time before the 3rd.
i shot some in my big horn with no problems.

Offline NWKrenz

  • Trade Count: (0)
  • Tracker
  • **
  • Join Date: Jun 2015
  • Posts: 51
  • Location: Westside
Re: 300grn Barnes expander MZ
« Reply #40 on: September 29, 2015, 01:16:14 PM »
Yes they were, have you used them before?

No, But I would like to try them. Am going to check a couple places and see if they have them today. I tried some Harvester crush ribs. They seemed a little on the loose side. Havent shot with them yet to see how they perform though.

I think you will like how the Knight sabots feel. They are nice and tight but not too tight, hope you are able to find some.

Offline n_mathews13

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Jul 2014
  • Posts: 1309
  • Location: E. WA
Re: 300grn Barnes expander MZ
« Reply #41 on: October 12, 2015, 05:15:51 AM »
Work great. From This weekends deer

 


* Advertisement

* Recent Topics

Roosevelt Elk. Please nudge me in the right direction. I feel hopeless. by blackveltbowhunter
[Today at 11:32:45 AM]


How is late season whitetail hunting? Good, bad, decent? GMU 105/117? by WoodHacker
[Today at 10:56:33 AM]


Multi season elk by Sundance
[Today at 10:39:42 AM]


High end binocs by Snakeriver
[Today at 10:12:09 AM]


Any MT deer updates? by Tbob
[Today at 10:09:28 AM]


Guidance to hunting new area by MADMAX
[Today at 09:50:56 AM]


WTS: reloading components by Smkn_brl00
[Today at 09:43:03 AM]


RRS Lever Release Clamp for Ball Head by pickardjw
[Today at 08:15:33 AM]


Taneum Elk Cow tag problem by Ewoiwod
[Today at 08:12:32 AM]


My Wenaha bull by Gonehuntin01
[Today at 08:08:05 AM]


BNSF Land Access by Sandberm
[Today at 06:58:18 AM]


Slide Ridge Quality tag holders by Britt-dog
[Today at 06:09:06 AM]


2025 elk success thread!! by jeffitz
[Today at 04:04:14 AM]


My Entiat Late tag thread by scottfrick
[Yesterday at 10:15:40 PM]


Stevens double barrel 410 by scotsman
[Yesterday at 09:39:58 PM]


Xlr element vs mdt hnt26 by dmoua
[Yesterday at 09:30:35 PM]


2025 blacktail rut thread by HntnFsh
[Yesterday at 08:55:39 PM]


East Side Quail Numbers? by Goshawk
[Yesterday at 08:55:20 PM]


Hunting late season, where would you go? by kodiak06
[Yesterday at 07:43:16 PM]


Late Season archery elk by jason stevens
[Yesterday at 06:26:12 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal