collapse

Advertisement


Author Topic: What would you do?  (Read 3769 times)

Offline Pnwrider

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Aug 2014
  • Posts: 755
  • Location: PNW
What would you do?
« on: October 19, 2015, 06:50:15 PM »
I'm about to lose 1/3 of my hunting season. I bought a new boat first week in September (lund 18ssv), figuring it would give me a month to get it rigged up as I bought a bare hull. The motor I have has remote controls so I had the dealer order a side console from lund and was quoted 3 weeks for delivery. No problem as I was going deer hunting during the waterfowl opener and should have plenty of time.

3 weeks pass and I start to get worried about timing so I contact lund. They say the dealer called in the order a week after I paid them and they build each console to order which takes 3-4 weeks. I finally receive a package from lund last Tuesday and they got the order wrong! They only sent one of the three pieces I need. Dealer says lund messed up the order and it's gonna be another 3-4 weeks.

I'm looking for input on what I should do to not miss a month of duck hunting. These are my thoughts but maybe someone here has an idea I'm not thinking of.

1. Ask for a refund and buy a tiller for my current motor (guessing cost would be 1000-1500). Not a big fan of tillers, just sold my previous jon boat that had one.

2. Buy a tiller motor off cl (there's an older 30hp Yamaha listed for 1800) and sell it after the console arrives. Might take a small $$ loss but at least I won't miss a month of hunting.

3. Use my 15hp kicker motor. Boat would be painfully slow, but cost would be zilch.

4. Let the boat sit and focus on walk in hunting at some of the qh sites.

Thoughts?

Offline ducksdogsdownriggers

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Dec 2010
  • Posts: 228
  • Location: Wenatchee
Re: What would you do?
« Reply #1 on: October 19, 2015, 09:16:57 PM »
#2. Easy. If you've got the cash. Should be easy to sell once you're done with it.
 :twocents:

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: What would you do?
« Reply #2 on: October 19, 2015, 09:45:25 PM »
Buy the 30hp with tiller.  Easy deal as once you get the side console and other parts, you still have to take time to mount everything.  A kicker motor would probably work for the time being.
Cut em!
It's not the shells!  It's the shooter!

Offline full choke

  • Non-Hunting Topics
  • Trade Count: (+14)
  • Frontiersman
  • *****
  • Join Date: Jan 2009
  • Posts: 2714
  • Location: Maple Valley
Re: What would you do?
« Reply #3 on: October 20, 2015, 06:32:45 AM »
For what it is worth, I have two older Evinrude 30's I am going to be selling. I am only looking for $350-400 ea. I have a couple 40hp's I am selling also (one runs, the other needs some tiller parts). PM me if you are interested
"If you think our wars for oil are bad, wait until we are fighting for water..."

Offline Snowgoose1

  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Jan 2008
  • Posts: 105
Re: What would you do?
« Reply #4 on: October 20, 2015, 07:06:15 AM »
Tiller all the way.  It will leave you more room for decoys/gear and or crab pots.

Offline h2ofowlr

  • CHOKED UP TIGHT
  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Dec 2008
  • Posts: 9120
  • Location: In the "Blind"! Go Cougs!
Re: What would you do?
« Reply #5 on: October 20, 2015, 11:30:47 AM »
There is a 25 hp Yamaha LS w/ tiller handle at JC Pawn Shop in Mt. Vernon for $1,100.  It would be a good option if it runs.
Cut em!
It's not the shells!  It's the shooter!

Offline Pnwrider

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Aug 2014
  • Posts: 755
  • Location: PNW
Re: What would you do?
« Reply #6 on: October 20, 2015, 11:36:44 AM »
Found out lund shipped the new console this morning. Should have it early next week! Squeaky wheel gets the grease, they must have gotten tired of all my phone calls asking for updates and to expedite it.

Offline Gobble

  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2008
  • Posts: 2542
  • Location: Yelm, Wa
  • Wack'em and Stack'em
    • Dave Harder
Re: What would you do?
« Reply #7 on: October 20, 2015, 12:01:48 PM »
#3, Its free and you will be happier in the longrun

Offline Stein

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Explorer
  • ******
  • Join Date: Sep 2013
  • Posts: 12916
  • Location: Arlington
Re: What would you do?
« Reply #8 on: October 21, 2015, 03:45:34 PM »
If it doesn't work out, PM me and I would be happy to take you out on my boat in exchange for some experience with someone who knows more than I do.

Offline Pnwrider

  • Political & Covid-19 Topics
  • Trade Count: (+1)
  • Longhunter
  • *****
  • Join Date: Aug 2014
  • Posts: 755
  • Location: PNW
Re: What would you do?
« Reply #9 on: October 21, 2015, 06:23:35 PM »
If it doesn't work out, PM me and I would be happy to take you out on my boat in exchange for some experience with someone who knows more than I do.
I appreciate the offer and will do!

 


* Advertisement

* Recent Topics

Ritzville Rifle Buck - GMU 284 by Sundance
[Today at 12:37:11 PM]


Eastern WA-WT hunting from tree stands?? by finnman
[Today at 12:28:44 PM]


Vashon Island deer tag by swanderek
[Today at 12:27:06 PM]


Rehome for GWP by metlhead
[Today at 12:25:21 PM]


Oregon results posted. by finnman
[Today at 12:23:59 PM]


Idaho 2025 Controlled Hunts by Shooter4
[Today at 12:13:32 PM]


Stillaguamish 448 QD rifle tag by Hi-Liter
[Today at 12:06:37 PM]


Palouse/Mica (GMU 127) Access for Trades Work by andersonjk4
[Today at 12:00:59 PM]


Muzzy Mission Quality!!! by finnman
[Today at 11:54:18 AM]


Entiat Quality tag by psr81
[Today at 11:31:34 AM]


Colockum Archery Bull Tag by throttlejocky20
[Today at 11:27:12 AM]


For the Vortex guys by pianoman9701
[Today at 11:23:45 AM]


Teanaway bull elk by throttlejocky20
[Today at 11:23:44 AM]


Palouse buck deer by MMCCAULEY
[Today at 11:09:55 AM]


2025 OILS! by HillHound
[Today at 10:25:46 AM]


Awesome customer service by Stein
[Today at 10:22:51 AM]


Boat registration by Alchase
[Today at 10:15:57 AM]


Youth Cow Tag by DUCKDUDE
[Today at 09:10:29 AM]


Pogue Quality by DUCKDUDE
[Today at 09:03:01 AM]


Put in for a tag I NEVER thought I would draw. by pd
[Today at 08:42:07 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal