collapse

Advertisement


Author Topic: rotary tumbler with stainless pins  (Read 3157 times)

Offline bambam3960

  • Trade Count: (+12)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 54
  • Location: wa
  • Groups: nra bdgc
rotary tumbler with stainless pins
« on: December 09, 2015, 11:36:35 AM »
Does anyone have any experience with a rotary tumbler in combination with stainless pins/cleaning solution for cleaning brass?  My vibratory tumbler went TU yesterday and am considering a different method.  From the reviews I've read online the majority of them are more positive than the vibratory type tumblers generally get.  Any input or shared experiences would be much appreciated. 
« Last Edit: December 09, 2015, 11:42:11 AM by bambam3960 »

Offline fly-by

  • Forum Sponsor
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Nov 2011
  • Posts: 562
  • Location: Snoqualmie, WA
Re: rotary tumbler with stainless pins
« Reply #1 on: December 09, 2015, 11:46:15 AM »
I have been using the Frankford kit that comes with pins for about a year now.  Very happy with it compared to the vibratory tumbler.  I just use a couple tablespoons of cascade and warm water and the brass comes out great.

Offline JimmyHoffa

  • Non-Hunting Topics
  • Trade Count: (+2)
  • Explorer
  • ******
  • Join Date: Sep 2010
  • Posts: 14540
  • Location: 150 Years Too Late
Re: rotary tumbler with stainless pins
« Reply #2 on: December 09, 2015, 11:59:13 AM »
I seem to recall that the price of the pin set up was quite a bit higher than the vibrating older style.  I've looked at parts online to build your own and you can get the finished price down pretty low by using a motor and cage from old rock tumblers and then getting a good tub to roll in the cage.  Sometimes you can get jeweler's mix media for less than the stuff bagged as reloading mix.

Offline bambam3960

  • Trade Count: (+12)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 54
  • Location: wa
  • Groups: nra bdgc
Re: rotary tumbler with stainless pins
« Reply #3 on: December 09, 2015, 12:30:09 PM »
I'm actually looking at the Frankfort kit... Does this method have any effect on brass life or is it similar to the corncob or walnut media?  Yes it is quite a bit more expensive than the vibratory set up but I'm thinking the longevity of the machine and the media may be greater as well as produce a cleaner end result.  My experience with the old style was the corncob media never seemed to clean the inside of the cases or primer pocket much and also tends to get stuck in the flash hole if decapped prior to tumbling.

Offline fly-by

  • Forum Sponsor
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Nov 2011
  • Posts: 562
  • Location: Snoqualmie, WA
Re: rotary tumbler with stainless pins
« Reply #4 on: December 09, 2015, 04:52:23 PM »
I'm actually looking at the Frankfort kit... Does this method have any effect on brass life or is it similar to the corncob or walnut media?  Yes it is quite a bit more expensive than the vibratory set up but I'm thinking the longevity of the machine and the media may be greater as well as produce a cleaner end result.  My experience with the old style was the corncob media never seemed to clean the inside of the cases or primer pocket much and also tends to get stuck in the flash hole if decapped prior to tumbling.

Cases do seem to be much cleaner.  Using corn cob or walnut there always seemed to be some residue that was evident when using case lube.

Offline JJB11B

  • Non-Hunting Topics
  • Trade Count: (+5)
  • Frontiersman
  • *****
  • Join Date: Sep 2010
  • Posts: 4496
Re: rotary tumbler with stainless pins
« Reply #5 on: December 09, 2015, 04:54:36 PM »
crushed walnut lizard bedding from the pet store is a cheap alternative.....
"Pain heals, chicks dig scars, glory lasts forever."
Shane Falco

Offline fly-by

  • Forum Sponsor
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Nov 2011
  • Posts: 562
  • Location: Snoqualmie, WA
Re: rotary tumbler with stainless pins
« Reply #6 on: December 09, 2015, 07:13:00 PM »

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31527
  • Location: Goldendale,WA
Re: rotary tumbler with stainless pins
« Reply #7 on: December 09, 2015, 11:03:14 PM »
I have been using a rotary tumbler and stainless media for years. It's the best way to clean brass IMHO.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

Offline bambam3960

  • Trade Count: (+12)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 54
  • Location: wa
  • Groups: nra bdgc
Re: rotary tumbler with stainless pins
« Reply #8 on: December 10, 2015, 05:43:29 AM »
Thank you all for the input.  After reading the reviews and now hearing from you gents I will be upgrading.   :tup:

Offline b23

  • Non-Hunting Topics
  • Trade Count: (+7)
  • Frontiersman
  • *****
  • Join Date: Jan 2010
  • Posts: 3308
  • Location: Spokane Wa.
Re: rotary tumbler with stainless pins
« Reply #9 on: December 10, 2015, 07:43:48 AM »
I have been using a rotary tumbler and stainless media for years. It's the best way to clean brass IMHO.

X2! :yeah:

Been using it since 2008 in a Thumler Tumbler.  The SS pins will never wear out and the brass comes out, literally, looking like it's brand new.  After using this type of setup, I couldn't imagine ever using anything else.  It really does work that well.

Offline bambam3960

  • Trade Count: (+12)
  • Tracker
  • **
  • Join Date: Mar 2013
  • Posts: 54
  • Location: wa
  • Groups: nra bdgc
Re: rotary tumbler with stainless pins
« Reply #10 on: December 10, 2015, 08:29:36 AM »
Do any of you guys use the magnet to handle the media or is that really needed?

Offline fly-by

  • Forum Sponsor
  • Trade Count: (+7)
  • Longhunter
  • *****
  • Join Date: Nov 2011
  • Posts: 562
  • Location: Snoqualmie, WA
Re: rotary tumbler with stainless pins
« Reply #11 on: December 10, 2015, 09:20:17 AM »
Do any of you guys use the magnet to handle the media or is that really needed?

It's very helpful, and they are cheap.  If you spill some pins, it's about the only way to collect them.

Offline dontgetcrabs

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2009
  • Posts: 1900
Re: rotary tumbler with stainless pins
« Reply #12 on: December 10, 2015, 09:28:06 AM »
Do any of you guys use the magnet to handle the media or is that really needed?

A lot of ss is not magnetic. Not sure how effective a magnet would be?

Offline high country

  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: May 2007
  • Posts: 5133
Re: rotary tumbler with stainless pins
« Reply #13 on: December 13, 2015, 09:10:36 PM »
The magnet works fine. I use the pins in a tumblers tumbler. I use water and dawn....nothing else. When I pull them out they go on a dehydrator for 20 mins or so.....clean as new, dry and ready to go.

I have a couple vibratory tumblers and even an electric cement mixer......the pins pretty much make them obsolete.

Offline carpsniperg2

  • Site Sponsor
  • Global Moderator
  • Trade Count: (+126)
  • Legend
  • *****
  • Join Date: Sep 2009
  • Posts: 31527
  • Location: Goldendale,WA
Re: rotary tumbler with stainless pins
« Reply #14 on: December 13, 2015, 09:13:40 PM »
I use the dehydrator as well :chuckle:

One other trick is: There is a product called lemishine "spelling" that will help prevent tarnish from hard water.
Owner: SPLIT DIAMOND TACTICAL
Firearms/Transfers/Parts/Optics
2011 HW Head Competition Winner

 


* Advertisement

* Recent Topics

11th Annual 'Pull For Scouting' Clay Crushing Classic by high_hunter
[Today at 12:27:18 AM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by high_hunter
[Today at 12:21:33 AM]


Ritzville Rifle Buck - GMU 284 by high_hunter
[Yesterday at 11:49:16 PM]


Antlerless Moose more than once? by shootem
[Yesterday at 11:25:51 PM]


Nooksack Muzzleloader Bull Tag by high_hunter
[Yesterday at 10:42:24 PM]


2025 Draw Results by kramman
[Yesterday at 10:27:20 PM]


My wife drew quality deer DESERT rifle 10/18-10/26!!!!! by high_hunter
[Yesterday at 10:17:15 PM]


Palouse buck deer by blumtnelkndeer
[Yesterday at 10:14:00 PM]


Drew Quality by Jimmer
[Yesterday at 09:34:00 PM]


Nevada guide draw Mule Deer by Beastmonger1987
[Yesterday at 09:33:34 PM]


Quality Swakane by Rainier10
[Yesterday at 09:09:17 PM]


Son drawn - Silver Dollar Youth Any Elk - Help? by VickGar
[Yesterday at 09:06:22 PM]


Observatory quality bull rifle by buglebuster
[Yesterday at 09:00:02 PM]


Anterless 1334 muzzle loader by Bdawg
[Yesterday at 08:46:31 PM]


A little Martini Cadet varmint rifle I have been working on by JDHasty
[Yesterday at 08:43:33 PM]


Pogue Quality by geauxtigers
[Yesterday at 08:38:35 PM]


Bow mount trolling motors by Happy Gilmore
[Yesterday at 08:06:18 PM]


2025 OILS! by HUNTNORTHWEST
[Yesterday at 07:46:27 PM]


A question for any FFL holders on here by Knocker of rocks
[Yesterday at 07:34:49 PM]


Last year putting in… by MADMAX
[Yesterday at 07:25:41 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal