Author Topic: RAD Ti-Con Sale 7/11-7/15 (Read 15087 times)

RadSav · « **on:** July 11, 2016, 02:50:40 AM »

OK, I know a lot of you guys have been asking for this one!!

Act quick on this one! This H-W special ends at 11:59PM Friday July 15, 2016.

RadSav · « **Reply #1 on:** July 11, 2016, 02:52:48 AM »

My personal head the Ti-Con normally comes in a three pack. Price of the 3/pk is usually $53.99.

For a limited time "Hunting Washington" members will get these as a 5 PACK for the price of a 3/pk.

Buy 3 packs or more and pay only $48.99 for each 5/pack. Plus get free freight!

Available in 100 and 125. 3 blade only!

Since this special is for H-W members only - please place orders by PM. Leave a phone number, proper name and USPS shipping address.

RadSav · « **Reply #2 on:** July 11, 2016, 03:15:00 AM »

Point of impact on my NWT caribou!

These are my personal first choice when I set out for any serious bowhunt!

bowhunterforever · « **Reply #3 on:** July 11, 2016, 03:50:04 AM »

Good deal there

I think I want to try one of them 4 blade heads you make but not sure which one yet

RadSav · « **Reply #4 on:** July 11, 2016, 03:57:36 AM »

Quote from: bowhunterforever on July 11, 2016, 03:50:04 AM

Good deal there I think I want to try one of them 4 blade heads you make but not sure which one yet

The online store is expected to launch this week!

Also, Archery World, Phelps and Carpsniper2 have some. If they are out of stock we will drop ship for them. I just got a new run of 4 blade ferrules back from anodizing! So we are ready for anything you need!

bowhunterforever · « **Reply #5 on:** July 11, 2016, 04:05:34 AM »

Quote from: RadSav on July 11, 2016, 03:57:36 AM

Quote from: bowhunterforever on July 11, 2016, 03:50:04 AM
Good deal there I think I want to try one of them 4 blade heads you make but not sure which one yet

The online store is expected to launch this week!

Also, Archery World, Phelps and Crapsniper2 have some. If they are out of stock we will drop ship for them. I just got a new run of 4 blade ferrules back from anodizing! So we are ready for anything you need!

Let us know when the online store launches

grundy53 · « **Reply #6 on:** July 11, 2016, 04:41:46 AM »

Sounds good. I'll have to pick some up.

Sent from my E6782 using Tapatalk

RadSav · « **Reply #7 on:** July 11, 2016, 05:02:25 AM »

Quote from: bowhunterforever on July 11, 2016, 04:05:34 AM

Quote from: RadSav on July 11, 2016, 03:57:36 AM
Quote from: bowhunterforever on July 11, 2016, 03:50:04 AM
Good deal there I think I want to try one of them 4 blade heads you make but not sure which one yet

The online store is expected to launch this week!

Also, Archery World, Phelps and Crapsniper2 have some. If they are out of stock we will drop ship for them. I just got a new run of 4 blade ferrules back from anodizing! So we are ready for anything you need!
Let us know when the online store launches

I certainly will. Hunting WA members will be the first to know.

D-Rock425 · « **Reply #8 on:** July 11, 2016, 05:08:22 AM »

Packaging looks awesome.

Karl Blanchard · « **Reply #9 on:** July 11, 2016, 06:25:51 AM »

PM inbound!!!

I've taken 5 critters with this same head the last few years and it is a wicked head!!! Coach and I were able to jog the blood trail on my elk last year. It was a couple feet wide.

BULLBLASTER · « **Reply #10 on:** July 11, 2016, 08:06:45 AM »

Pm inbound!

RadSav · « **Reply #11 on:** July 11, 2016, 07:50:51 PM »

Giving a bump for the evening crowd!

grundy53 · « **Reply #12 on:** July 11, 2016, 08:20:49 PM »

Maybe I missed it but if we are doing this by PM how do I go about paying you?

Sent from my E6782 using Tapatalk

syoungs · « **Reply #13 on:** July 11, 2016, 08:42:01 PM »

Quote from: RadSav on July 11, 2016, 03:57:36 AM

Quote from: bowhunterforever on July 11, 2016, 03:50:04 AM
Good deal there I think I want to try one of them 4 blade heads you make but not sure which one yet

The online store is expected to launch this week!

Also, Archery World, Phelps and Crapsniper2 have some. If they are out of stock we will drop ship for them. I just got a new run of 4 blade ferrules back from anodizing! So we are ready for anything you need!

No reason to call names! Poor carpsniper

D-Rock425 · « **Reply #14 on:** July 11, 2016, 08:58:57 PM »

Quote from: syoungs on July 11, 2016, 08:42:01 PM

Quote from: RadSav on July 11, 2016, 03:57:36 AM
Quote from: bowhunterforever on July 11, 2016, 03:50:04 AM
Good deal there I think I want to try one of them 4 blade heads you make but not sure which one yet

The online store is expected to launch this week!

Also, Archery World, Phelps and Crapsniper2 have some. If they are out of stock we will drop ship for them. I just got a new run of 4 blade ferrules back from anodizing! So we are ready for anything you need!

No reason to call names! Poor carpsniper

RadSav · « **Reply #15 on:** July 11, 2016, 09:40:33 PM »

Quote from: syoungs on July 11, 2016, 08:42:01 PM

Quote from: RadSav on July 11, 2016, 03:57:36 AM
Quote from: bowhunterforever on July 11, 2016, 03:50:04 AM
Good deal there I think I want to try one of them 4 blade heads you make but not sure which one yet

The online store is expected to launch this week!

Also, Archery World, Phelps and Crapsniper2 have some. If they are out of stock we will drop ship for them. I just got a new run of 4 blade ferrules back from anodizing! So we are ready for anything you need!

No reason to call names! Poor carpsniper

Ahhh Hahahaha. That's what happens when your on cold medicine and have been up for 36 hours straight! Sorry Carp.

RadSav · « **Reply #16 on:** July 11, 2016, 09:45:29 PM »

Quote from: grundy53 on July 11, 2016, 08:20:49 PM

Maybe I missed it but if we are doing this by PM how do I go about paying you?

Orders will be delivered with a RAD, Inc. invoice. On that invoice will be a toll free phone number and a remittance address. You can call Lorraine with a credit card number or send a check.

When the online store goes live (any moment actually), most orders will be a prepay online credit card. But since this is a special offer to Hunting Washington members it's easier to just send invoices with orders.

Thank you for all the support guys. Looks like I'm going to be busy tonight packaging!

RadSav · « **Reply #17 on:** July 11, 2016, 09:53:51 PM »

Still making a few minor tweaks. But the online store is now operational.

NOTE: Hunting Washington specials are not available thru RAD Online

http://radicalarchery-online.com/

MLBowhunting · « **Reply #18 on:** July 11, 2016, 11:03:04 PM »

Love the Ti-Con it's tough as hell.

bracer40 · « **Reply #19 on:** July 11, 2016, 11:11:16 PM »

Rad,
This is a great offer, thank you! One of the things I like about the Slicktricks I've been using is that they have the same point of impact as my field points. When I returned to archery about 6 years ago, I really liked that I didn't have to adjust my sights differently for broad heads from field points.

Will these also have the same poi as field Points?

RadSav · « **Reply #20 on:** July 11, 2016, 11:33:34 PM »

Depends on tune and how well your spine fits the bow. I find them just as easy to get FP accuracy as any other. But it's not automatic. Still have to match the arrow and tune it.

I had a Hoyt Ultra-Tec that I could not get field points and these broadheads to group together to save my life (WASP, Shuttle-T and Slick Trick all grouped similar to the Ti-Con). At 70 yards the broadheads were always 6-8" off from field points. I changed from my favorite A/C/C to an all carbon arrow with a bit higher dynamic stiffness...BAM!!!- all grouped the same to 100 yards.

If I have a bow that won't shoot a group of RAD, WASP, G5, Shuttle-T, Slick Trick and field points into the same group at 70 yards...I don't own that bow and/or those arrows for very long.

grundy53 · « **Reply #21 on:** July 12, 2016, 04:48:47 AM »

Quote from: RadSav on July 11, 2016, 09:45:29 PM

Quote from: grundy53 on July 11, 2016, 08:20:49 PM
Maybe I missed it but if we are doing this by PM how do I go about paying you?

Orders will be delivered with a RAD, Inc. invoice. On that invoice will be a toll free phone number and a remittance address. You can call Lorraine with a credit card number or send a check.

When the online store goes live (any moment actually), most orders will be a prepay online credit card. But since this is a special offer to Hunting Washington members it's easier to just send invoices with orders.

Thank you for all the support guys. Looks like I'm going to be busy tonight packaging!

Thank you. PM sent.

Sent from my E6782 using Tapatalk

Ddouble · « **Reply #22 on:** July 12, 2016, 07:12:46 AM »

PM sent thanks!

bracer40 · « **Reply #23 on:** July 12, 2016, 08:43:54 PM »

Quote from: RadSav on July 11, 2016, 11:33:34 PM

Depends on tune and how well your spine fits the bow. I find them just as easy to get FP accuracy as any other. But it's not automatic. Still have to match the arrow and tune it.

I had a Hoyt Ultra-Tec that I could not get field points and these broadheads to group together to save my life (WASP, Shuttle-T and Slick Trick all grouped similar to the Ti-Con). At 70 yards the broadheads were always 6-8" off from field points. I changed from my favorite A/C/C to an all carbon arrow with a bit higher dynamic stiffness...BAM!!!- all grouped the same to 100 yards.

If I have a bow that won't shoot a group of RAD, WASP, G5, Shuttle-T, Slick Trick and field points into the same group at 70 yards...I don't own that bow and/or those arrows for very long.

Thank you

RadSav · « **Reply #24 on:** July 13, 2016, 08:36:25 AM »

I apologies to all those who had to wait an extra day for their shipment to go out.

We were rolling pretty good when suddenly cards started smoking coming out of the sealer. That's NEVER a good sign! Apparently the flash point on the adhesive is about 530 degrees We had lost a connection to one of the heater leads and the control board could not handle it - GFI trips and boom gone!

After I failed to find a fix here Darren tosses the backup parts sealer in the truck and runs it down from Kent to Vancouver. Thank goodness for Big Brothers!! Wouldn't you know the wiring is different between the two units (suppose to be identical). Five hours of staring at wires, boards and banging my head against the wall...we are back in business!

Thank you for all your patience.

BULLBLASTER · « **Reply #25 on:** July 13, 2016, 08:46:08 AM »

Isn't that just another day in the life of rad?
Man nothing is ever easy and smooth for you!

Keep up the good work

RadSav · « **Reply #26 on:** July 13, 2016, 09:06:29 AM »

I think it is common among companies that have grown as fast as we have. And started with as little money as we had.

I remember those first couple years when I spent more time fishing the Lewis than I did in the office. Now 12 years later I feel fortunate when I can get a full four hours of sleep at one time. But, growing pains are good. Much better than the alternative!

grundy53 · « **Reply #27 on:** July 13, 2016, 09:06:45 AM »

No worries. Can't wait to try them out.

Sent from my E6782 using Tapatalk

BULLBLASTER · « **Reply #28 on:** July 13, 2016, 09:12:33 AM »

Quote from: RadSav on July 13, 2016, 09:06:29 AM

I think it is common among companies that have grown as fast as we have. And started with as little money as we had.

I remember those first couple years when I spent more time fishing the Lewis than I did in the office. Now 12 years later I feel fortunate when I can get a full four hours of sleep at one time. But, growing pains are good. Much better than the alternative!

Elmer Fletch · « **Reply #29 on:** July 15, 2016, 07:57:03 AM »

PM sent

RadSav · « **Reply #30 on:** July 15, 2016, 08:08:13 AM »

Last day! Special ends at midnight.

125 grain Ti-Con. 38 yard shot on this antelope. Straight on - End2End 10 yard recovery

dyhardhuntr · « **Reply #31 on:** July 15, 2016, 08:42:26 AM »

Pm sent

et1702 · « **Reply #32 on:** July 15, 2016, 09:09:52 AM »

Pm sent! Thanks for the incredible offer for HW members.

ET

westside Elkhunter · « **Reply #33 on:** July 15, 2016, 09:43:34 AM »

Pm inbound. Thanks radsav

Sent from my SM-G935V using Tapatalk

MLBowhunting · « **Reply #34 on:** July 16, 2016, 12:41:39 AM »

RadSav · « **Reply #35 on:** July 16, 2016, 01:46:33 AM »

We almost doubled the number of Ti-Con 100 and 125s shipped than I thought we would. We really do appreciate it!

Thank you all for your continued support!

lokidog · « **Reply #36 on:** July 16, 2016, 09:52:47 AM »

Oh, now I see this post....

Congrats on moving some merchandise and maybe getting some new customers.

BOWHUNTER45 · « **Reply #37 on:** July 16, 2016, 09:54:30 AM »

Quote from: RadSav on July 15, 2016, 08:08:13 AM

Last day! Special ends at midnight.

125 grain Ti-Con. 38 yard shot on this antelope. Straight on - End2End 10 yard recovery

NICE GOAT ...I need to do that soon !

blackveltbowhunter · « **Reply #38 on:** July 18, 2016, 01:24:21 PM »

Got home from work this AM and found this package had arrived over the weekend!! Thanks RAD!

wannabhntr · « **Reply #39 on:** July 18, 2016, 01:38:31 PM »

Quote from: blackveltbowhunter on July 18, 2016, 01:24:21 PM

Got home from work this AM and found this package had arrived over the weekend!! Thanks RAD!

Got mine today too. Great service. Ordered Wednesday, shipped Thursday arrived today. Can't wait for the season to start. Thanks Radsav.

grundy53 · « **Reply #40 on:** July 18, 2016, 02:57:49 PM »

Got mine too. Can't wait to try them out.

Sent from my E6782 using Tapatalk

PlateauNDN · « **Reply #41 on:** July 18, 2016, 04:12:26 PM »

Dang, How'd I miss this deal...

Karl Blanchard · « **Reply #42 on:** July 18, 2016, 04:53:08 PM »

Quote from: PlateauNDN on July 18, 2016, 04:12:26 PM

Dang, How'd I miss this deal...

too much fire water

MLBowhunting · « **Reply #43 on:** July 18, 2016, 11:40:00 PM »

bowguy · « **Reply #44 on:** July 19, 2016, 06:11:51 AM »

Go camping and miss this great deal

Quackwhacker · « **Reply #45 on:** July 19, 2016, 06:32:29 AM »

Sounds like you should have another sale Rad.

Sent from my SM-G920V using Tapatalk

RadSav · « **Reply #46 on:** July 19, 2016, 08:01:36 AM »

Will have more coming soon!

wannabhntr · « **Reply #47 on:** July 24, 2016, 03:04:41 PM »

Stupid beginner archer question. Are the washers that come with the broad heads included in the 100 gr wt. or is that just the weight of the broad head?

RadSav · « **Reply #48 on:** July 24, 2016, 08:50:21 PM »

With all RAD Broadheads - Yes, weight/locking collars are included in the weight.

News:

Advertisement

Author Topic: RAD Ti-Con Sale 7/11-7/15 (Read 15087 times)

Advertisement

Quick Links

Recent Topics