collapse

Advertisement


Author Topic: FOC question  (Read 3863 times)

Offline erk444

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 1217
FOC question
« on: July 26, 2016, 07:45:02 PM »
With 100 grain tips Im at 14.03%. With 125s, Im at 15.3%. Im shooting a 350 spine carbon express maxima at 28 1/2" at 62#. I think my arrow might be a little stiff with the 100s, but I like the 14% FOC. Is 15.3% to much? Am I over thinking this?

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: FOC question
« Reply #1 on: July 26, 2016, 07:56:51 PM »
You must have some heavy inserts!

Or some REALLY light fletching.
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline erk444

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 1217
Re: FOC question
« Reply #2 on: July 26, 2016, 08:06:16 PM »
I have 4 fletch blazers :dunno: Maybe I didn't figure it out right :dunno: My arrow length is 28.5" and my balance point was at 18.25" with 100s, and 18.63" with 125s. So, minus 14.25" from 18.25"=4, multiply by 100=400, divide by 28.5"=14.03% .....right?

Offline Gobble Gobble

  • Proud Daddy & Disabled Veteran
  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Dec 2008
  • Posts: 1069
  • Location: Yakima, WA
  • B.O.H.I.C.A.
Re: FOC question
« Reply #3 on: July 26, 2016, 08:15:15 PM »
Since I shoot GT I like to use their calculator.


https://www.goldtip.com/calculators.aspx 
God Bless,
Scott

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: FOC question
« Reply #4 on: July 26, 2016, 08:18:20 PM »
Don't forget you need to add the length of point.
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline erk444

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 1217
Re: FOC question
« Reply #5 on: July 26, 2016, 09:09:13 PM »
Ok, so I figured out where I went wrong. I burned an inch when I measured to my balance point so my 18.25" is really 17.25" :chuckle:. Man its hard being a dumb ass sometime :bash: Looks like the 125s will put me at 11.84%. I think that should work.

Offline Torrent50

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Aug 2014
  • Posts: 535
  • Location: Rochester
Re: FOC question
« Reply #6 on: July 26, 2016, 09:42:24 PM »
I'm at about 21% and they fly great.
"when you gaze long into the abyss, the abyss gazes also into you."  Friedrich Nietzsche

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: FOC question
« Reply #7 on: July 27, 2016, 06:05:20 AM »
Ok, so I figured out where I went wrong. I burned an inch when I measured to my balance point so my 18.25" is really 17.25" :chuckle:. Man its hard being a dumb ass sometime :bash: Looks like the 125s will put me at 11.84%. I think that should work.

If I were shooting my Maxima shafts at that length with factory inserts...I would be shooting a 125 grain head.  It is a great set-up!  One of my all time favorites :tup:
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline erk444

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 1217
Re: FOC question
« Reply #8 on: July 27, 2016, 06:27:25 AM »
Sweet, thanks Rad.

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: FOC question
« Reply #9 on: July 27, 2016, 06:39:21 AM »
I have found there are certain thresholds in archery that really make a difference. 55# draw weight, 12% FOC, 350 grain arrow...just to name a few.  But once you break that barrier the returns don't necessarily increase exponentially.   So while there are concerns about reaching numbers we can over think our equipment, for North American game, rather easily. 

IMO - The simple math is normally more than effective.  So I'll take an arrow with point that measures 28.5" and mark the mid point (14.25).  Then 28.5 x .12 = 3.42" so I make another mark forward of the center mark by 3.42".  If my arrow balances at that mark or forward of that mark...I'm good.  More than 12% is just minutia in my mind unless I'm questionable on fletching or excessive on broadhead surface.

Our efforts are often better focused toward accuracy, repeatability and choosing the right shot than on the trivial details within the minutia.  Even if those details can, at times, be fun!
« Last Edit: July 27, 2016, 07:35:48 AM by RadSav »
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline Miles

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 3532
  • Location: Pensacola, Florida
Re: FOC question
« Reply #10 on: July 27, 2016, 07:14:31 AM »
I'm guessing you get fingered the 24.25 as it should be 14.25.

Offline 92xj

  • Trade Count: (+26)
  • Frontiersman
  • *****
  • Join Date: May 2009
  • Posts: 4010
  • Location: Out of Place
  • Kill 'em
Re: FOC question
« Reply #11 on: July 27, 2016, 07:28:09 AM »
I'm guessing you get fingered the 24.25 as it should be 14.25.

I'm guessing you fat fingered the "get" as it should be "fat". :chuckle:

Unless you meant "got" instead of "get" and we'll just leave that for another thread.
"If you have to be crazy to hunt ducks, I do not wish to be sane."

Offline Miles

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 3532
  • Location: Pensacola, Florida
Re: FOC question
« Reply #12 on: July 27, 2016, 07:29:44 AM »
Lol, damn autocorrect.

Offline RadSav

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Explorer
  • ******
  • Join Date: Jun 2011
  • Posts: 11342
  • Location: Vancouver
Re: FOC question
« Reply #13 on: July 27, 2016, 07:36:11 AM »
 :chuckle: :chuckle:  Come on coffee...I need you!
He asked, Do you ever give a short simple answer?  I replied, "Nope."

Offline erk444

  • Business Sponsor
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Jan 2010
  • Posts: 1217
Re: FOC question
« Reply #14 on: July 27, 2016, 10:03:12 AM »
 :chuckle: :chuckle:

 


* Advertisement

* Recent Topics

New bow ideas by WoolSocks
[Today at 02:34:43 PM]


Are all case trimmers created equal? by JDArms1240
[Today at 02:33:58 PM]


From Behind by boneaddict
[Today at 02:27:27 PM]


Dodge trucks by boneaddict
[Today at 02:25:59 PM]


Idaho's new Deer/Elk License System by CarbonHunter
[Today at 01:26:46 PM]


Idaho Trapping Journal 2025/26 by TeacherMan
[Today at 01:01:44 PM]


Tis The Season by JDArms1240
[Today at 12:52:31 PM]


Drew Moose Tag by throttlejocky20
[Today at 11:17:21 AM]


Idaho on the verge of outlawing by Machias
[Today at 10:56:12 AM]


Winthrop wolves by timberfaller
[Today at 09:33:39 AM]


Dodge 48re transmission recommendations by baker5150
[Today at 08:28:35 AM]


JES reboring experience by BigGoonTuna
[Today at 04:11:40 AM]


New record WA shiras by huntnnw
[Yesterday at 09:43:18 PM]


maybe a shooter by lewy
[Yesterday at 09:37:17 PM]


Back country tent suggestions by millerwheeler
[Yesterday at 08:29:16 PM]


Wildlife Obsession Duvall WA Taxidermy Closing its doors by Irish_hunter93
[Yesterday at 07:45:19 PM]


Western Wa gunsmith by okie john
[Yesterday at 06:02:52 PM]


management buck by jstone
[Yesterday at 04:25:35 PM]

SimplePortal 2.3.7 © 2008-2026, SimplePortal