collapse

Advertisement


Author Topic: Ruger Blackhawk single action cylinder won't rotate  (Read 7325 times)

Offline Colin

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 621
  • Location: Monroe
Ruger Blackhawk single action cylinder won't rotate
« on: October 01, 2016, 05:35:28 AM »
Been slowly going thru my safe and have a ruger Blackhawk new model in 30 carbine. For some reason the cylinder will not rotate when the loading gate is open. Initiall thought that a pin or spring was missing but i Have the same gun in .357 and have taken both apart and compared and all parts apear to be present and assembled correctly.

Thoughts?

Sent from my SM-G900V using Tapatalk


Offline craigapphunt

  • Trade Count: (+3)
  • Hunter
  • ***
  • Join Date: Jul 2015
  • Posts: 171
  • Location: centralia, wa
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #1 on: October 01, 2016, 06:47:04 AM »
ive been told ruger has good customer service you might give them a call.

Offline MHWASH

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1191
  • Location: Colfax
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #2 on: October 01, 2016, 08:17:24 AM »
Is it an "old model"? Try putting the hammer on half cock and try it.

Offline Encore 280

  • Non-Hunting Topics
  • Trade Count: (+11)
  • Sourdough
  • *****
  • Join Date: Oct 2011
  • Posts: 1993
  • Location: Poulsbo
  • Groups: Encore 280
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #3 on: October 01, 2016, 08:18:29 AM »
It's the "new model" and not the "3 screw"? The old 3 screw ya have to pull the hammer back to half cock other than that not sure what it would be.

Offline Colin

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 621
  • Location: Monroe
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #4 on: October 01, 2016, 09:05:17 AM »
Yeah it's the new model.

Sent from my SM-G900V using Tapatalk


Offline HawkCreek

  • Non-Hunting Topics
  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Mar 2013
  • Posts: 537
  • Location: Grant, Lincoln and Douglas
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #5 on: October 01, 2016, 12:06:28 PM »
Check that the hammer plunger and/or the hammer plunger cross pin aren't damaged or binding up. Happened on my Vaquero. Disassembled they looked ok and seemed to move but when I removed them the cross pin was beginning to sheer and bend. I replaced them both and it's worked fine ever since.

Offline MHWASH

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1191
  • Location: Colfax
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #6 on: October 01, 2016, 05:45:12 PM »
Try using the cross pin and spring from the 357.

Offline Colin

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 621
  • Location: Monroe
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #7 on: October 01, 2016, 05:51:17 PM »
Hmm good ideas will try and get some work in once our baby is down.

Sent from my SM-G900V using Tapatalk


Offline Bofire

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Old Salt
  • ******
  • Join Date: Oct 2007
  • Posts: 5524
  • Location: Yelm
  • Harley YAR YAR YAR!
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #8 on: October 01, 2016, 06:42:38 PM »
cylinder pawl latch or spring, or both.
Ruger will give you the parts.
Carl
When the chips are down..... the buffalo is empty!!

I do not shop at Amazon

Offline Colin

  • Trade Count: (0)
  • Longhunter
  • *****
  • Join Date: Jul 2013
  • Posts: 621
  • Location: Monroe
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #9 on: October 03, 2016, 07:16:42 PM »
Finally got around to taking a 2nd look and discovered I'm an idiot... the 357 is a new model and the 30 carbine is the old... doh

Sent from my SM-G900V using Tapatalk


Offline MHWASH

  • Political & Covid-19 Topics
  • Trade Count: (+5)
  • Sourdough
  • *****
  • Join Date: Jun 2007
  • Posts: 1191
  • Location: Colfax
Re: Ruger Blackhawk single action cylinder won't rotate
« Reply #10 on: October 03, 2016, 07:29:05 PM »
Can't beat a cheap easy fix.

 


* Advertisement

* Recent Topics

Basin elk by acrocker
[Today at 06:53:15 PM]


Bow mount trolling motors by Badhabit
[Today at 06:27:53 PM]


Is FS70 open? by pickardjw
[Today at 06:22:29 PM]


Nooksack Archery Tag by LongBomb
[Today at 05:48:19 PM]


Colockum Archery Bull Tag by Smittyk44
[Today at 04:23:53 PM]


Muzzy Mission Quality!!! by jstone
[Today at 04:16:00 PM]


49 degrees north late Moose tag by Buzzsaw461
[Today at 04:11:52 PM]


I'm Going To Need Karl To Come up With That 290 Muley Sunscreen Bug Spray Combo by BULLBLASTER
[Today at 03:53:35 PM]


Mature bulls during late season? by Pete112288
[Today at 03:51:08 PM]


best draw for moose unit wise by deadwoodbuck
[Today at 03:29:03 PM]


Stillaguamish 448 QD rifle tag by Hi-Liter
[Today at 03:23:47 PM]


Vashon Island deer tag by bowhunter_1
[Today at 02:59:43 PM]


2025 OILS! by jackelope
[Today at 01:47:31 PM]


Cowiche Quality Buck by buglebuster
[Today at 01:02:45 PM]


Big J's Powder list by BigJs Outdoor Store
[Today at 12:59:31 PM]


Getting back into dogs by WALLEYEGUY
[Today at 12:55:09 PM]


Idaho 2025 Controlled Hunts by phildobaggins
[Today at 11:31:27 AM]


FFL preferences or warnings in Olympia or south Sound area? by Knocker of rocks
[Today at 11:07:04 AM]


Bear behavior by dylan34_36
[Today at 08:51:28 AM]


Idaho Unit 31 Late Rifle! by Sliverslinger
[Today at 08:36:10 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal