collapse

Advertisement


Author Topic: Tapped holes in Knight Bighorn Reciever  (Read 2925 times)

Offline elksnout

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2009
  • Posts: 1412
  • Location: Washougal, Wash
Tapped holes in Knight Bighorn Reciever
« on: November 14, 2016, 08:30:16 PM »
 There are five drilled & tapped holes on the top of my stainless Bighorn. There are two right above the nipple and then a series of three holes to the rear of the nipple adjacent to the safety. A gunsmith plugged those three with stainless screws. For the two holes above the nipple he just plugged the very front one closet to the rear sight.

Here's my question...can I plug that one hole that's unplugged? The gunsmith thought that was some type of gas vent? I'm thinking that's not accurate. If I could legally mount a scope on the gun, the front part of the base would screw there anyway. With that one hole left unplugged, isn't that a place for water to enter and get the powder wet?

Elksnout
Can't we all just get along?

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Tapped holes in Knight Bighorn Reciever
« Reply #1 on: November 14, 2016, 08:58:02 PM »
There are five drilled & tapped holes on the top of my stainless Bighorn. There are two right above the nipple and then a series of three holes to the rear of the nipple adjacent to the safety. A gunsmith plugged those three with stainless screws. For the two holes above the nipple he just plugged the very front one closet to the rear sight.

Here's my question...can I plug that one hole that's unplugged? The gunsmith thought that was some type of gas vent? I'm thinking that's not accurate. If I could legally mount a scope on the gun, the front part of the base would screw there anyway. With that one hole left unplugged, isn't that a place for water to enter and get the powder wet?

Elksnout

The 5 holes on top of the receiver are for scope mount or for a rear peep site.  If you are not using them they all should be filled with a filler screw.

The front two holes for the scope mount - I think the rear of the two does go all the way through but it is over the top of the nipple.  I would certainly put a plug screw in it - actually I would put a screw in all of them if I were not using them.

Keep shooting muzzleloaders - They are a blast!!

Offline elksnout

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2009
  • Posts: 1412
  • Location: Washougal, Wash
Re: Tapped holes in Knight Bighorn Reciever
« Reply #2 on: November 14, 2016, 09:23:32 PM »
Four of the five are plugged. Soon all five will be. Thanks for the info Sabotloader. As a side note: unplugged above the nipple would allow rain to drip and get my powder wet. Yes?
Can't we all just get along?

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Tapped holes in Knight Bighorn Reciever
« Reply #3 on: November 15, 2016, 09:46:09 AM »
Four of the five are plugged. Soon all five will be. Thanks for the info Sabotloader. As a side note: unplugged above the nipple would allow rain to drip and get my powder wet. Yes?

It possibly could make it to the powder charge  - but a larger possibility is it really could drop through and get into you cap!
Keep shooting muzzleloaders - They are a blast!!

 


* Advertisement

* Recent Topics

WA Bucket List….Mule Deer Permit by Gentrys
[Today at 08:14:34 AM]


The Rack by DaNewb
[Today at 08:02:44 AM]


Darwin Outfitters by teanawayslayer
[Today at 07:16:54 AM]


My Kansas 2025 Buck by Pathfinder101
[Today at 07:03:32 AM]


GO 2025 15th Annual Hunting-Washington Christmas Gift Exchange by wadu1
[Today at 06:58:46 AM]


Idaho on the verge of outlawing by NOCK NOCK
[Today at 05:35:09 AM]


Lion Down - the Savor of Success by Scruffy
[Today at 12:00:38 AM]


Idaho's new Deer/Elk License System by huntnnw
[Yesterday at 09:54:33 PM]


KODIAK06 2025 trail cam and personal pics thread by kodiak06
[Yesterday at 08:46:41 PM]


Power bait secrets......send it by metlhead
[Yesterday at 07:26:47 PM]


Leopard Cur Pups by Barehunter
[Yesterday at 04:09:58 PM]


In the background by Ricochet
[Yesterday at 01:22:33 PM]


Midwest Whitetails by northwesthunter84
[Yesterday at 12:26:51 PM]


2027 Pink Run Destroyed by Bareback
[Yesterday at 08:26:10 AM]


Local knife makers ? by HntnFsh
[Yesterday at 07:25:57 AM]


Idaho Trapping Journal 2025/26 by TeacherMan
[Yesterday at 06:36:07 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal