collapse

Advertisement


Author Topic: Tapped holes in Knight Bighorn Reciever  (Read 2906 times)

Offline elksnout

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2009
  • Posts: 1412
  • Location: Washougal, Wash
Tapped holes in Knight Bighorn Reciever
« on: November 14, 2016, 08:30:16 PM »
 There are five drilled & tapped holes on the top of my stainless Bighorn. There are two right above the nipple and then a series of three holes to the rear of the nipple adjacent to the safety. A gunsmith plugged those three with stainless screws. For the two holes above the nipple he just plugged the very front one closet to the rear sight.

Here's my question...can I plug that one hole that's unplugged? The gunsmith thought that was some type of gas vent? I'm thinking that's not accurate. If I could legally mount a scope on the gun, the front part of the base would screw there anyway. With that one hole left unplugged, isn't that a place for water to enter and get the powder wet?

Elksnout
Can't we all just get along?

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Tapped holes in Knight Bighorn Reciever
« Reply #1 on: November 14, 2016, 08:58:02 PM »
There are five drilled & tapped holes on the top of my stainless Bighorn. There are two right above the nipple and then a series of three holes to the rear of the nipple adjacent to the safety. A gunsmith plugged those three with stainless screws. For the two holes above the nipple he just plugged the very front one closet to the rear sight.

Here's my question...can I plug that one hole that's unplugged? The gunsmith thought that was some type of gas vent? I'm thinking that's not accurate. If I could legally mount a scope on the gun, the front part of the base would screw there anyway. With that one hole left unplugged, isn't that a place for water to enter and get the powder wet?

Elksnout

The 5 holes on top of the receiver are for scope mount or for a rear peep site.  If you are not using them they all should be filled with a filler screw.

The front two holes for the scope mount - I think the rear of the two does go all the way through but it is over the top of the nipple.  I would certainly put a plug screw in it - actually I would put a screw in all of them if I were not using them.

Keep shooting muzzleloaders - They are a blast!!

Offline elksnout

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Feb 2009
  • Posts: 1412
  • Location: Washougal, Wash
Re: Tapped holes in Knight Bighorn Reciever
« Reply #2 on: November 14, 2016, 09:23:32 PM »
Four of the five are plugged. Soon all five will be. Thanks for the info Sabotloader. As a side note: unplugged above the nipple would allow rain to drip and get my powder wet. Yes?
Can't we all just get along?

Offline Sabotloader

  • Trade Count: (0)
  • Sourdough
  • *****
  • Join Date: Apr 2011
  • Posts: 2309
  • Location: Idaho, Northern
Re: Tapped holes in Knight Bighorn Reciever
« Reply #3 on: November 15, 2016, 09:46:09 AM »
Four of the five are plugged. Soon all five will be. Thanks for the info Sabotloader. As a side note: unplugged above the nipple would allow rain to drip and get my powder wet. Yes?

It possibly could make it to the powder charge  - but a larger possibility is it really could drop through and get into you cap!
Keep shooting muzzleloaders - They are a blast!!

 


* Advertisement

* Recent Topics

New world record mule? by elk_sniper
[Today at 07:50:01 AM]


Cougar license question by birdshooter1189
[Today at 06:50:31 AM]


2025 deer, let's see em! by HereDuckyDucky
[Today at 06:49:58 AM]


5 Points......(mule deer or blacktails) by hunt6226
[Today at 06:34:33 AM]


Aladdin unit 111 mule deer quality tag by tgomez
[Today at 12:49:11 AM]


2025 OILS! by d_wilson
[Yesterday at 10:26:59 PM]


Where can one find hides from hunters? by Remnar
[Yesterday at 10:03:19 PM]


I can only take duck at a time! by Goshawk
[Yesterday at 09:46:26 PM]


Older SxS shotgun by JDHasty
[Yesterday at 08:53:52 PM]


Bull moose...luck or ??? by MADMAX
[Yesterday at 08:46:37 PM]


What boots? by pickardjw
[Yesterday at 08:38:07 PM]


The Gutless Method by Antlershed
[Yesterday at 08:29:42 PM]


2025 Quality Chewuch Tag by Pathfinder101
[Yesterday at 08:15:44 PM]


As He Lay by X-Force
[Yesterday at 08:05:43 PM]


Drew Pogue Quality by X-Force
[Yesterday at 08:04:01 PM]


2025 15th Annual Hunting-Washington Christmas Gift Exchange by wadu1
[Yesterday at 07:34:53 PM]


Wowzers by Schmalzfam
[Yesterday at 07:07:26 PM]


Meet Kumpel by elkboy
[Yesterday at 06:18:56 PM]


Montana Elk Last Ditch Effort by Stein
[Yesterday at 06:15:41 PM]


211 Mile Ambler Road Through The Brooks Range Approved by dwils233
[Yesterday at 04:51:34 PM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal