Author Topic: Winchester Model 1200 part needed (Read 8337 times)

tntklundt · « **on:** February 12, 2009, 03:45:12 PM »

I am not having any luck getting a part I broke on my Winchester model 120 shotgun. My gun says model 120 but from what I can tell the parts for a 1200 are interchangeable. I broke the Slide Arm Extension w/ 6 1/4 Tube. The local gun shop I talked to can't find the part. I found it listed online at E-gunparts.com but according to them Winchester is no longer in business and they have no other supplier. Any ideas???
Thanks in advance

jackelope · « **Reply #1 on:** February 12, 2009, 04:15:22 PM »

numrich arms in upstate new york. they have a website. if they don't have it...you won't find it anywhere.

jackelope · « **Reply #2 on:** February 12, 2009, 04:17:22 PM »

well...i'm a dummy...apparently that is e-gunparts.com

sorry

tntklundt · « **Reply #3 on:** February 12, 2009, 04:21:21 PM »

Thanks for trying

KillBilly · « **Reply #4 on:** February 12, 2009, 04:23:35 PM »

Check with Numrich Gun Parts Inc. They carry your part http://www.e-gunparts.com/productschem.asp?chrMasterModel=0950z1200

The Key number is 46 and the Item number is 260720

They are out of stock but it is a good place to start

KillBilly · « **Reply #5 on:** February 12, 2009, 04:25:09 PM »

Quote from: jackelope on February 12, 2009, 04:17:22 PM

well...i'm a dummy...apparently that is e-gunparts.com

sorry

You were right, it is Numrich and they list his part, just out of stock

jackelope · « **Reply #6 on:** February 12, 2009, 04:35:46 PM »

when i lived in NY i lived only a few miles from that place.
cool place.

tntklundt · « **Reply #7 on:** February 12, 2009, 05:15:54 PM »

I have to get the part for this gun. It is my favorite. I bought it new 20 years ago. When it shoots, birds die.

KillBilly · « **Reply #8 on:** February 12, 2009, 05:58:45 PM »

Quote from: tntklundt on February 12, 2009, 05:15:54 PM

I have to get the part for this gun. It is my favorite. I bought it new 20 years ago. When it shoots, birds die.

Call them tomorrow. they probably have an idea who else might have it

12Gauge · « **Reply #9 on:** February 13, 2009, 03:38:00 PM »

Have a machinist make it for you.

tntklundt · « **Reply #10 on:** February 13, 2009, 04:12:42 PM »

That is my backup plan if I can't find it new.

12Gauge · « **Reply #11 on:** February 13, 2009, 04:23:41 PM »

What actually broke? One of the arm piece that extends from the tube?

Can it be welded together, then grind down smooth, re-blued?

MuleySniper · « **Reply #12 on:** February 13, 2009, 04:24:10 PM »

Try posting on 24hourcampfire too. Lots of gun heads on that site.
MS

12Gauge · « **Reply #13 on:** February 13, 2009, 04:39:39 PM »

Is this what you need?

http://www.gunbroker.com/Auction/ViewItem.asp?Item=122774502

tntklundt · « **Reply #14 on:** February 13, 2009, 07:39:18 PM »

Thanks to everyone and their ideas but 12Gauge is the winner. He found the part I needed at Gunbroker and with the "buy it now option" I should have it in a week.

HawkenBob · « **Reply #15 on:** February 15, 2009, 05:40:46 PM »

I have a 1200 12 ga I never use. The rear stock is loose, but I hunted it for a few years. Really isnt in bad shape at all. And works just fine. If ya want a backup. Its just sittin. Make me a cheap offer or trade for somthing...

I could use a decent scope for my .22.

bowelkin · « **Reply #16 on:** February 15, 2009, 06:42:12 PM »

hawkenbob, If doesn't want it I might. Does it have the "winchoke"? I have used my 1200 for 30+ years and love it.

tntklundt · « **Reply #17 on:** February 15, 2009, 07:03:12 PM »

Now that I have the part I need I am good. Thanks for the offer.

HawkenBob · « **Reply #18 on:** February 16, 2009, 08:36:53 AM »

I couldent tell ya if it has a winchoke or not.

bowelkin · « **Reply #19 on:** February 16, 2009, 11:06:20 AM »

That would be the screw in chokes.

HawkenBob · « **Reply #20 on:** February 16, 2009, 11:12:01 AM »

No it dosent. Ill let it go for 100 bucks. You get first dibs...

News:

Advertisement

Author Topic: Winchester Model 1200 part needed (Read 8337 times)

Advertisement

Quick Links

Recent Topics