collapse

Advertisement


Author Topic: DIY Euro  (Read 3415 times)

Offline Brushcrawler

  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Mar 2016
  • Posts: 526
  • Location: West side
DIY Euro
« on: December 26, 2016, 04:15:13 PM »
This was an experiment, as much to see the process unfold and enjoy figuring out the steps with my son than for the final product.
We started by reading this several times:
http://hunting-washington.com/smf/index.php/topic,16008.msg181209.html#msg181209
Then we skinned and de-brained my blacktail skull which had been relaxing in the freezer..
Then we set up a 5 gallon bucket and aquarium heater.   
Three weeks later we had progress (1st picture).
Wife nearly ended the project due to the smell.  Even the dog wasn't interested.
Three more weeks and the skull was pretty clean (2nd picture).
Three weeks in a Dawn bath, changing the water every few days took out most of the grease. 
Project allowed inside the house for the first time.
Six hours in peroxide (not touching the antlers)
No smell and ready for the wall (3rd picture).
This turned out to be pretty easy to do, and a good learning experience!


There is not enough wilderness left in the world, or in the hearts of men.

Offline Mark251

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Jun 2015
  • Posts: 2608
  • Location: Spokane
Re: DIY Euro
« Reply #1 on: December 26, 2016, 04:21:27 PM »
Nice job  :tup:

Online hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 8732
  • Location: In Your Hunting Spot
  • Groups: NRA RMEF
Re: DIY Euro
« Reply #2 on: December 26, 2016, 05:05:44 PM »
Nice work right there,this is also my first year at it , yours looks a lot white than mine.did mine in one day with boiling, and presure washer.

Offline Miles

  • Non-Hunting Topics
  • Trade Count: (0)
  • Frontiersman
  • *****
  • Join Date: Apr 2007
  • Posts: 3533
  • Location: Pensacola, Florida
Re: DIY Euro
« Reply #3 on: December 26, 2016, 05:08:42 PM »
Looks good.  I also did mine with a little boiling and a pressure washer in one afternoon like the post above.

Online hunter399

  • Political & Covid-19 Topics
  • Trade Count: (0)
  • Old Salt
  • ******
  • Join Date: Feb 2014
  • Posts: 8732
  • Location: In Your Hunting Spot
  • Groups: NRA RMEF
Re: DIY Euro
« Reply #4 on: December 26, 2016, 05:10:37 PM »
A lot more work than youtube let's on. Getting the teeth white seems.to take awhile.

Offline Milkman

  • Trade Count: (0)
  • Scout
  • ****
  • Join Date: Sep 2016
  • Posts: 290
  • Location: Federal way
Re: DIY Euro
« Reply #5 on: December 26, 2016, 05:17:16 PM »
All look very good!

Offline blindluck

  • Non-Hunting Topics
  • Trade Count: (+1)
  • Sourdough
  • *****
  • Join Date: Oct 2013
  • Posts: 1018
  • Location: Over yonder
Re: DIY Euro
« Reply #6 on: December 26, 2016, 05:31:46 PM »
If you crank your heater to run about 105 degrees it will usually only take 5-7 days to totally macerate, I spent a couple years doing them at temp a around 85 and taking 2 plus weeks to get all the meat free. Nice work

Offline lewy

  • Forum Sponsor
  • Trade Count: (+1)
  • Frontiersman
  • *****
  • Join Date: Dec 2008
  • Posts: 3889
  • Location: buckley
  • IBEW RMEF WSTA WCO NRA
Re: DIY Euro
« Reply #7 on: December 26, 2016, 06:34:04 PM »
Nice work! I've got a moose skull that's a bit crooked like that
Go hawks

Offline Brushcrawler

  • Trade Count: (+6)
  • Longhunter
  • *****
  • Join Date: Mar 2016
  • Posts: 526
  • Location: West side
Re: DIY Euro
« Reply #8 on: January 05, 2017, 04:24:45 PM »
Thanks blindluck, I've got a squirrel skull soaking at a higher temp now.
There is not enough wilderness left in the world, or in the hearts of men.

Offline O. hemionus

  • Non-Hunting Topics
  • Trade Count: (0)
  • Hunter
  • ***
  • Join Date: Oct 2013
  • Posts: 223
Re: DIY Euro
« Reply #9 on: January 07, 2017, 06:52:53 PM »
Keep a close eye on the squirrel skull. I had one macerating in a container outside during the fall (no additional heat) and in less than a week, the skull had fallen apart into several pieces. I was able to glue it back together, but it would have been easier if I had pulled out much earlier.

 


* Advertisement

* Recent Topics

erronulvin trail cam photos by hunter399
[Today at 02:44:53 AM]


2024 deer. Let’s see um! by dreadi
[Today at 12:02:30 AM]


Jupiter Mountain Rayonier Permit- 621 Bull Tag by MADMAX
[Yesterday at 11:27:22 PM]


1st Quality Deer tag in Washington and its a muzzleloader tag by addicted1
[Yesterday at 11:26:44 PM]


Willapa Hills 1 Bear by bobcat
[Yesterday at 10:36:58 PM]


wyoming pronghorn draw by 280ackley
[Yesterday at 10:22:47 PM]


10 years ago- Now by Ridgerunner
[Yesterday at 09:49:05 PM]


1993 Merc issues getting up on plane by addicted1
[Yesterday at 09:44:51 PM]


Sockeye Numbers by Southpole
[Yesterday at 08:08:59 PM]


Area 11 2025 - Well? by Tinmaniac
[Yesterday at 07:46:11 PM]


White River MF Bull Permit by Kingofthemountain83
[Yesterday at 06:50:13 PM]


Public Land Sale Senate Budget Reconciliation by bigtex
[Yesterday at 05:52:18 PM]


Worksharp belts by JLS
[Yesterday at 04:03:08 PM]


Yakima bow shop by Fireman10
[Yesterday at 03:19:35 PM]


Tree stand for Western Washingtn by addicted1
[Yesterday at 03:06:42 PM]


Early Huckleberry Bull Moose tag drawn! by HillHound
[Yesterday at 01:18:10 PM]


Sportsman Alliance files petition to Gov Ferguson for removal of corrupt WA Wildlife Commissioners by timberfaller
[Yesterday at 12:45:33 PM]


Article on the beaver trapping ban in OR by greenhead_killer
[Yesterday at 12:41:42 PM]


Ten Years, and still plugging along by ghosthunter
[Yesterday at 10:59:16 AM]


AKC lab puppies! Born 06/10/2025 follow as they grow!!! by scottfrick
[Yesterday at 10:48:11 AM]

SimplePortal 2.3.7 © 2008-2025, SimplePortal